component
OP282GSZ-REEL
Public Made by Adomby adom
Analog Devices FET Input Amplifiers, SOIC-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
Generated by kicad-footprint-generator · KiCad file format 20260206
| Name | Last updated |
|---|---|
| docs | 7d ago |
| viewers | 7d ago |
| op282gsz-reel-etched.glb | 7d ago |
| op282gsz-reel-etched.step | 7d ago |
| op282gsz-reel-hero.glb | 7d ago |
| op282gsz-reel-hero.overlay.json | 7d ago |
| op282gsz-reel.glb | 7d ago |
| op282gsz-reel.kicad_mod | 7d ago |
| op282gsz-reel.kicad_sym | 7d ago |
| op282gsz-reel.lbr | 7d ago |
| op282gsz-reel.step | 7d ago |
| package.json | 7d ago |
| page.json | 7d ago |
| README.md | 7d ago |
OP282GSZ-REEL
Analog Devices · FET Input Amplifiers · SOIC-8
OP282GSZ-REEL from Analog Devices, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT A | output | Output of amplifier A, which swings to within 1.5 V of each supply rail. |
| 2 | -IN A | input | Inverting input of amplifier A, using a JFET input stage with bias current under 500 pA over the full temperature range. |
| 3 | +IN A | input | Non-inverting input of amplifier A, with a common-mode input range of -11 V to +15 V at ±15 V supplies. |
| 4 | V- | power_in | Negative supply rail; supply voltage range is ±4.5 V to ±18 V with an absolute maximum of ±18 V. |
| 5 | +IN B | input | Non-inverting input of amplifier B, with a common-mode input range of -11 V to +15 V at ±15 V supplies. |
| 6 | -IN B | input | Inverting input of amplifier B, using a JFET input stage with bias current under 500 pA over the full temperature range. |
| 7 | OUT B | output | Output of amplifier B, which swings to within 1.5 V of each supply rail. |
| 8 | V+ | power_in | Positive supply rail; the input common-mode range extends up to V+ and the absolute maximum supply is ±18 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | SOIC-8 |
| Category | Amplifiers/Comparators |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Offset Voltage (OP282) | VOS | 0.2 | 3 | mV | OP282; VS = ±15.0 V, TA = 25°C (table header) | 3 | |
| Offset Voltage (OP282, −40°C ≤ TA ≤ +85°C) | VOS | 4.5 | mV | OP282, −40°C ≤ TA ≤ +85°C | 3 | ||
| Input Bias Current | IB | 3 | 100 | pA | VCM = 0 V | 3 | |
| Input Bias Current | IB | 500 | pA | VCM = 0 V (note 1) | 3 | ||
| Input Offset Current | IOS | 1 | 50 | pA | VCM = 0 V | 3 | |
| Input Offset Current | IOS | 250 | pA | VCM = 0 V (note 1) | 3 | ||
| Input Voltage Range | -11 | 15 | V | 3 | |||
| Common-Mode Rejection Ratio | CMRR | 70 | 90 | dB | −11 V ≤ VCM ≤ +15 V, −40°C ≤ TA ≤ +85°C | 3 | |
| Large-Signal Voltage Gain | AVO | 20 | V/mV | RL = 10 kΩ, VO = ±13.5 V | 3 | ||
| Large-Signal Voltage Gain | AVO | 15 | V/mV | RL = 10 kΩ, −40°C ≤ TA ≤ +85°C | 3 | ||
| Output Voltage High | VOH | 13.5 | 13.9 | V | RL = 10 kΩ | 3 | |
| Output Voltage Low | VOL | -13.9 | -13.5 | V | RL = 10 kΩ | 3 | |
| Short-Circuit Limit (Source) | ISC | 3 | 10 | mA | Source | 3 | |
| Short-Circuit Limit (Sink) | ISC | -12 | -8 | mA | Sink | 3 | |
| Power Supply Rejection Ratio | PSRR | 25 | 316 | µV/V | VS = ±4.5 V to ±18 V, −40°C ≤ TA ≤ +85°C | 3 | |
| Supply Current/Amplifier | ISY | 210 | 250 | µA | VO = 0 V, −40°C ≤ TA ≤ 85°C | 3 | |
| Supply Voltage Range | VS | 4.5 | 18 | V | 3 | ||
| Slew Rate | SR | 7 | 9 | V/µs | RL = 10 kΩ | 3 | |
| Supply Voltage (±) | 18 | V | Absolute maximum rating ±18 V | 4 | |||
| Input Voltage (±) | 18 | V | 4 | ||||
| Differential Input Voltage | 36 | V | Note 1: for supplies less than ±18 V, limit equals the supply voltage | 4 | |||
| Storage Temperature Range | -65 | 150 | °C | 4 | |||
| Operating Temperature Range | -40 | 85 | °C | 4 | |||
| Junction Temperature Range | -65 | 150 | °C | 4 | |||
| Lead Temperature (Soldering) | 300 | °C | Soldering 60 sec | 4 | |||
| Junction-to-Ambient Thermal Resistance (8-Lead SOIC_N, S-Suffix [R]) | θJA | 120 | °C/W | Device soldered in circuit board, standard 4-layer board | 4 | ||
| Junction-to-Case Thermal Resistance (8-Lead SOIC_N, S-Suffix [R]) | θJC | 45 | °C/W | 4 |
CAD (KiCad official)
- Symbol:
OP282GSZ-REEL - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
op282gsz-reel-etched.step/op282gsz-reel-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);op282gsz-reel.step/op282gsz-reel.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (16 pp, sha256
fe542ce0f21730c0, retrieved 2026-10-18, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).