component
OP27GM
Public Made by Adomby adom
HGSEMI Operational Amplifier, SOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownOP27GM
HGSEMI · Operational Amplifier · SOP-8
OP27GM from HGSEMI, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VOS TRIM | passive | Input offset voltage trim terminal, used with a 20kΩ potentiometer whose wiper goes to V+ to null input offset. |
| 2 | -IN | input | Inverting input of the op amp, with input voltage range of ±13V and absolute maximum input voltage of ±18V. |
| 3 | +IN | input | Non-inverting input of the op amp, with input voltage range of ±13V and absolute maximum input voltage of ±18V. |
| 4 | V- | power_in | Negative supply terminal, supply range ±3V to ±18V. |
| 5 | NC | unconnected | No connect; not internally connected. |
| 6 | OUT | output | Op amp output, with typical peak output swing of ±12V into 10kΩ and ±11.5V into 2kΩ. |
| 7 | V+ | power_in | Positive supply terminal, supply range ±3V to ±18V. |
| 8 | VOS TRIM | passive | Input offset voltage trim terminal, used with a 20kΩ potentiometer whose wiper goes to V+ to null input offset. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HGSEMI |
| Package | SOP-8 |
| Category | Amplifiers/Comparators |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | Vcc | -18 | 18 | V | 3 | ||
| Input voltage | Vi | -18 | 18 | V | 3 | ||
| Input differential voltage | Vid | -30 | 30 | V | 3 | ||
| Input offset voltage | Vio | 150 | uV | 3 | |||
| Input common-mode voltage | Vicm | -13 | 13.5 | V | 0℃<Tamb<70℃ | 3 | |
| Common-mode rejection ratio | CMR | 100 | dB | 3 | |||
| Supply voltage rejection ratio | SVR | 90 | dB | 3 | |||
| Large signal voltage gain | Avd | 100 | V/mV | VCC=±15V, RL=2kΩ, VO=±10V | 3 | ||
| Output peak voltage | Vopp | -12 | 12 | V | RL = 10kΩ | 3 | |
| Output peak voltage | Vopp | -11.5 | 11.5 | V | RL = 2kΩ | 3 | |
| Gain bandwidth product | GBP | 5 | 8 | MHz | RL=2kΩ,CL=100pF,f=100KHz | 3 | |
| Power supply current (no load) | ICC | 3.8 | 6 | mA | 0℃ <Tamb < 70℃, VCC = ±3V | 3 | |
| Operating temperature (OP27G,OP27C) | TOPR | -40 | 85 | ℃ | 3 | ||
| Storage temperature | TSTG | -40 | 150 | ℃ | 3 | ||
| Lead temperature (soldering) | TLEAD | 245 | ℃ | 10s soldering | 3 | ||
| Input offset voltage drift | DVio | 1.8 | uV/℃ | 3 | |||
| Input offset current | Iio | 8 | nA | 3 | |||
| Input bias current | Iib | 28 | nA | 3 |
CAD (KiCad official)
- Symbol:
OP27GM - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
op27gm-etched.step/op27gm-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);op27gm.step/op27gm.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: HGSEMI datasheet (8 pp, sha256
6f098f6f7ac162e6, retrieved 2026-10-18, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text+vision), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).