Generated by kicad-footprint-generator · KiCad file format 20260206
OP262GSZ
Analog Devices · Operational Amplifier · SOIC-8
OP262GSZ from Analog Devices, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT A | output | Output of amplifier A, which swings to within 60 mV of each supply rail at a 5 mA load and is not short-circuit protected, with the maximum safe output current stated as ±30 mA. |
| 2 | -IN A | input | Inverting input of amplifier A; input voltage should be limited to ±6 V to avoid damage and input current kept below 5 mA. |
| 3 | +IN A | input | Non-inverting input of amplifier A; the common-mode input range extends from ground to within 1 V of the positive supply. |
| 4 | V- | power_in | Negative supply pin; the part operates from a single supply as low as 2.7 V or dual supplies up to ±6 V. |
| 5 | +IN B | input | Non-inverting input of amplifier B; the common-mode input range extends from ground to within 1 V of the positive supply. |
| 6 | -IN B | input | Inverting input of amplifier B; input voltage should be limited to ±6 V to avoid damage and input current kept below 5 mA. |
| 7 | OUT B | output | Output of amplifier B, which swings to within 60 mV of each supply rail at a 5 mA load and is not short-circuit protected, with the maximum safe output current stated as ±30 mA. |
| 8 | V+ | power_in | Positive supply pin; the part operates from single supplies from 2.7 V to 12 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | SOIC-8 |
| Category | Amplifiers |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Offset Voltage | VOS | 45 | 325 | µV | OP162G, OP262G, OP462G; VS = 5.0 V, VCM = 0 V, TA = 25°C | 3 | |
| Offset Voltage over temperature | VOS | 800 | µV | -40°C ≤ TA ≤ +125°C; VS = 5.0 V | 3 | ||
| Input Bias Current | IB | 360 | 600 | nA | VS = 5.0 V | 3 | |
| Input Bias Current over temperature | IB | 650 | nA | -40°C ≤ TA ≤ +125°C; VS = 5.0 V | 3 | ||
| Input Offset Current | IOS | 2.5 | 25 | nA | VS = 5.0 V; printed ±2.5 typ, ±25 max (magnitude) | 3 | |
| Input Voltage Range | VCM | 0 | 4 | V | VS = 5.0 V | 3 | |
| Common-Mode Rejection | CMRR | 70 | 110 | dB | 0 V ≤ VCM ≤ 4.0 V, -40°C ≤ TA ≤ +125°C; VS = 5.0 V | 3 | |
| Large Signal Voltage Gain | AVO | 30 | V/mV | RL = 2 kΩ, 0.5 ≤ VOUT ≤ 4.5 V; VS = 5.0 V | 3 | ||
| Large Signal Voltage Gain | AVO | 65 | 88 | V/mV | RL = 10 kΩ, 0.5 ≤ VOUT ≤ 4.5 V; VS = 5.0 V | 3 | |
| Large Signal Voltage Gain over temperature | AVO | 40 | V/mV | RL = 10 kΩ, -40°C ≤ TA ≤ +125°C; VS = 5.0 V | 3 | ||
| Output Voltage Swing High | VOH | 4.95 | 4.99 | V | IL = 250 µA, -40°C ≤ TA ≤ +125°C; VS = 5.0 V | 3 | |
| Output Voltage Swing High | VOH | 4.85 | 4.94 | V | IL = 5 mA; VS = 5.0 V | 3 | |
| Output Voltage Swing Low | VOL | 14 | 50 | mV | IL = 250 µA, -40°C ≤ TA ≤ +125°C; VS = 5.0 V | 3 | |
| Output Voltage Swing Low | VOL | 65 | 150 | mV | IL = 5 mA; VS = 5.0 V | 3 | |
| Maximum Output Current | IOUT | 30 | mA | Sink and source; ±30 mA printed | 3 | ||
| Power Supply Rejection Ratio | PSRR | 120 | dB | VS = 2.7 V to 7 V | 3 | ||
| Power Supply Rejection Ratio over temperature | PSRR | 90 | dB | -40°C ≤ TA ≤ +125°C; VS = 2.7 V to 7 V | 3 | ||
| Supply Current/Amplifier | ISY | 500 | 700 | µA | OP262, OP462, VOUT = 2.5 V; VS = 5.0 V | 3 | |
| Supply Current/Amplifier over temperature | ISY | 850 | µA | OP262, OP462, -40°C ≤ TA ≤ +125°C; VS = 5.0 V | 3 | ||
| Slew Rate | SR | 10 | V/µs | 1 V < VOUT < 4 V, RL = 10 kΩ; VS = 5.0 V | 3 | ||
| Gain Bandwidth Product | GBP | 15 | MHz | VS = 5.0 V | 3 | ||
| Supply Voltage Range | VS | 3 | 12 | V | Printed 3.0 (±1.5) to 12 (±6) V; Table 3 (±5 V) range | 5 | |
| Operating Temperature Range | TA | -40 | 125 | °C | Extended industrial range | 6 | |
| Supply Voltage | 6 | V | Printed ±6 V | 6 | |||
| Input Voltage | 6 | V | Printed ±6 V; for supply above 6 V input limited to supply voltage | 6 | |||
| Differential Input Voltage | 0.6 | V | Printed ±0.6 V; input current limited to 5 mA above 0.6 V | 6 | |||
| Storage Temperature Range | TSTORE | -65 | 150 | °C | 6 | ||
| Junction Temperature Range | TJ | -65 | 150 | °C | 6 | ||
| Thermal Resistance Junction-to-Ambient, 8-Lead SOIC | θJA | 157 | °C/W | 8-Lead SOIC (S); device soldered in circuit board | 6 | ||
| Thermal Resistance Junction-to-Case, 8-Lead SOIC | θJC | 56 | °C/W | 8-Lead SOIC (S) | 6 |
CAD (KiCad official)
- Symbol:
OP262GSZ - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
op262gsz-etched.step/op262gsz-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);op262gsz.step/op262gsz.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (20 pp, sha256
07ec7633d2004ae1, retrieved 2026-11-21) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).