component
OP196GSZ-REEL7
Public Made by Adomby adom
Analog Devices Operational Amplifier, SOIC-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownOP196GSZ-REEL7
Analog Devices · Operational Amplifier · SOIC-8
OP196GSZ-REEL7 from Analog Devices, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NULL | passive | Offset null terminal; a 100 kΩ potentiometer connected as in Figure 3 is recommended to null the amplifier's internal VOS, with a trim pot temperature coefficient not exceeding ±100 ppm/°C. |
| 2 | -IN A | input | Inverting input of amplifier A, which must not be driven above or below either supply rail unless the input current is limited to no more than 5 mA. |
| 3 | +IN A | input | Noninverting input of amplifier A, which must not be driven above or below either supply rail unless the input current is limited to no more than 5 mA. |
| 4 | V- | power_in | Negative supply rail; the device operates from 3 V to 12 V single supply (VS) with absolute maximum supply voltage of 15 V. |
| 5 | NULL | passive | Offset null terminal used together with pin 1 and a 100 kΩ potentiometer to null the amplifier's internal VOS. |
| 6 | OUT A | output | Amplifier A output, rail-to-rail, specified to source and sink ±4 mA output current. |
| 7 | V+ | power_in | Positive supply rail; the device operates from 3 V to 12 V single supply (VS) with absolute maximum supply voltage of 15 V. |
| 8 | NC | unconnected | No connect; not internally connected to the amplifier. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | SOIC-8 |
| Category | Amplifiers |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Offset Voltage (OP196G) | VOS | 35 | 300 | µV | VS = 5.0 V, VCM = 2.5 V, TA = 25C | 2 | |
| Offset Voltage (OP196G) | VOS | 650 | µV | VS = 5.0 V, -40°C ≤ TA ≤ +125°C | 2 | ||
| Input Bias Current | IB | -50 | 10 | 50 | nA | VS = 5.0 V, -40°C ≤ TA ≤ +125°C | 2 |
| Input Offset Current | IOS | -8 | 1.5 | 8 | nA | VS = 5.0 V | 2 |
| Input Offset Current | IOS | -20 | 20 | nA | VS = 5.0 V, -40°C ≤ TA ≤ +125°C | 2 | |
| Input Voltage Range | VCM | 0 | 5 | V | VS = 5.0 V | 2 | |
| Common-Mode Rejection Ratio | CMRR | 65 | dB | VS = 5.0 V, 0 V ≤ VCM ≤ 5.0 V, -40°C ≤ TA ≤ +125°C | 2 | ||
| Large Signal Voltage Gain | AVO | 150 | 200 | V/mV | VS = 5.0 V, RL = 100 kΩ, 0.30 V ≤ VOUT ≤ 4.7 V, -40°C ≤ TA ≤ +125°C | 2 | |
| Long-Term Offset Voltage | VOS | 550 | µV | G Grade, Note 1 | 2 | ||
| Offset Voltage Drift | ∆VOS/∆T | 1.5 | µV/°C | G Grade, Note 2 | 2 | ||
| Output Voltage Swing High | VOH | 4.85 | 4.92 | V | VS = 5.0 V, IL = 100 µA | 2 | |
| Output Voltage Swing High | VOH | 4.3 | 4.56 | V | VS = 5.0 V, IL = 1 mA | 2 | |
| Output Voltage Swing High | VOH | 4.1 | V | VS = 5.0 V, IL = 2 mA | 2 | ||
| Output Voltage Swing Low | VOL | 36 | 70 | mV | VS = 5.0 V, IL =, (value garbled in text) | 2 | |
| Output Voltage Swing Low | VOL | 350 | 550 | mV | VS = 5.0 V, IL = -1 mA | 2 | |
| Output Voltage Swing Low | VOL | 750 | mV | VS = 5.0 V, IL = -2 mA | 2 | ||
| Output Current | IOUT | -4 | 4 | mA | 2 | ||
| Power Supply Rejection Ratio | PSRR | 85 | dB | ±2.5 V ≤ VS ≤ ±6 V, -40°C ≤ TA ≤ +125°C | 2 | ||
| Supply Current per Amplifier | ISY | 60 | µA | VS = 5.0 V, VOUT = 2.5 V, RL = ∞ | 2 | ||
| Supply Current per Amplifier | ISY | 45 | 80 | µA | VS = 5.0 V, VOUT = 2.5 V, RL = ∞, -40°C ≤ TA ≤ +125°C | 2 | |
| Offset Voltage (OP196G) | VOS | 35 | 300 | µV | VS = 3.0 V, VCM = 1.5 V, TA = 25C | 3 | |
| Offset Voltage (OP196G) | VOS | 650 | µV | VS = 3.0 V, 0°C ≤ TA ≤ 125°C | 3 | ||
| Input Bias Current | IB | -50 | 10 | 50 | nA | VS = 3.0 V | 3 |
| Input Offset Current | IOS | -8 | 1 | 8 | nA | VS = 3.0 V | 3 |
| Input Voltage Range | VCM | 0 | 3 | V | VS = 3.0 V | 3 | |
| Common-Mode Rejection Ratio | CMRR | 60 | dB | VS = 3.0 V, 0 V ≤ VCM ≤ 3.0 V, 0°C ≤ TA ≤ 125°C | 3 | ||
| Large Signal Voltage Gain | AVO | 80 | 200 | V/mV | VS = 3.0 V, RL = 100 kΩ | 3 | |
| Output Voltage Swing High | VOH | 2.85 | V | VS = 3.0 V, IL = 100 µA | 3 | ||
| Output Voltage Swing Low | VOL | 70 | mV | VS = 3.0 V, IL = -100 µA | 3 | ||
| Supply Current per Amplifier | ISY | 40 | 60 | µA | VS = 3.0 V, VOUT = 1.5 V, RL = ∞ | 3 | |
| Supply Current per Amplifier | ISY | 80 | µA | VS = 3.0 V, 0°C ≤ TA ≤ 125°C | 3 | ||
| Offset Voltage (OP196G) | VOS | 35 | 300 | µV | VS = 12.0 V, VCM = 6 V, TA = 25C | 4 | |
| Offset Voltage (OP196G) | VOS | 650 | µV | VS = 12.0 V, 0°C ≤ TA ≤ 125°C | 4 | ||
| Input Bias Current | IB | -50 | 10 | 50 | nA | VS = 12.0 V, -40°C ≤ TA ≤ +125°C | 4 |
| Input Offset Current | IOS | -8 | 1 | 8 | nA | VS = 12.0 V | 4 |
| Input Offset Current | IOS | -15 | 15 | nA | VS = 12.0 V, -40°C ≤ TA ≤ +125°C | 4 | |
| Input Voltage Range | VCM | 0 | 12 | V | VS = 12.0 V | 4 | |
| Common-Mode Rejection Ratio | CMRR | 65 | dB | VS = 12.0 V, 0 V ≤ VCM ≤ 12 V, -40°C ≤ TA ≤ +125°C | 4 | ||
| Large Signal Voltage Gain | AVO | 300 | 1000 | V/mV | VS = 12.0 V, RL = 100 kΩ | 4 | |
| Output Voltage Swing High | VOH | 11.85 | V | VS = 12.0 V, IL = 100 µA | 4 | ||
| Output Voltage Swing High | VOH | 11.3 | V | VS = 12.0 V, IL = 1 mA | 4 | ||
| Output Voltage Swing Low | VOL | 70 | mV | VS = 12.0 V, IL =, (value garbled in text) | 4 | ||
| Output Voltage Swing Low | VOL | 550 | mV | VS = 12.0 V, IL = -1 mA | 4 | ||
| Supply Current per Amplifier | ISY | 60 | µA | VS = 12.0 V, VOUT = 6 V, RL = ∞ | 4 | ||
| Supply Current per Amplifier | ISY | 80 | µA | VS = 12.0 V, VOUT = 6 V, RL = ∞, -40°C ≤ TA ≤ +125°C | 4 | ||
| Supply Voltage Range | VS | 3 | 12 | V | 4 | ||
| Supply Voltage | 15 | V | 5 | ||||
| Input Voltage | 15 | V | Note 2: for supply voltages below 15 V, equals the supply voltage | 5 | |||
| Differential Input Voltage | 15 | V | 5 | ||||
| Storage Temperature Range | -65 | 150 | °C | S package (8-lead SOIC) | 5 | ||
| Operating Temperature Range | -40 | 125 | °C | OP196G | 5 | ||
| Junction Temperature Range | -65 | 150 | °C | S package (8-lead SOIC) | 5 | ||
| Lead Temperature Range (Soldering) | 300 | °C | Soldering, 60 sec | 5 | |||
| Thermal Resistance Junction-to-Ambient, 8-Lead SOIC | θJA | 158 | °C/W | Worst case conditions (Note 3) | 5 | ||
| Thermal Resistance Junction-to-Case, 8-Lead SOIC | θJC | 43 | °C/W | 8-Lead SOIC | 5 |
CAD (KiCad official)
- Symbol:
OP196GSZ-REEL7 - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
op196gsz-reel7-etched.step/op196gsz-reel7-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);op196gsz-reel7.step/op196gsz-reel7.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (19 pp, sha256
c96c500b997f8d24, retrieved 2026-10-30, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).