OP07CP

{
 "schema": "adom.pads/1",
 "slug": "op07cp",
 "footprint": "DIP-8_W7.62mm",
 "generated_from": {
  "footprint": "DIP-8_W7.62mm@sha256:222fb44370968119",
  "pins": "page.json:component.pins",
  "overrides": null
 },
 "pin1": {
  "pad": "1",
  "at": [
   0.0,
   0.0
  ],
  "corner": "bottom-right",
  "source": "fab-chamfer",
  "derived_from": "DIP-8_W7.62mm@sha256:222fb44370968119"
 },
 "pad_count": 8,
 "symbol_pins": [
  "1",
  "2",
  "3",
  "4",
  "5",
  "6",
  "7",
  "8"
 ],
 "paste_apertures": 0,
 "issues": [],
 "pads": [
  {
   "pad": "1",
   "kind": "thru_hole",
   "shape": "roundrect",
   "at": [
    0.0,
    0.0
   ],
   "rot": 0.0,
   "size": [
    1.6,
    1.6
   ],
   "layers": [],
   "thermal": false,
   "pin": "1",
   "name": "OFFSET N1",
   "type": "passive",
   "description": "Offset null terminal 1. Connect a 20 kΩ potentiometer between OFFSET N1 (pin 1) and OFFSET N2 (pin 8) with the wiper tied to VCC+ to null the input offset voltage. Offset adjustment range is ±4 mV typ with Rs = 20 kΩ.",
   "is_pin1": true,
   "source": {
    "geometry": "DIP-8_W7.62mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "2",
   "kind": "thru_hole",
   "shape": "circle",
   "at": [
    0.0,
    2.54
   ],
   "rot": 0.0,
   "size": [
    1.6,
    1.6
   ],
   "layers": [],
   "thermal": false,
   "pin": "2",
   "name": "IN-",
   "type": "input",
   "description": "Inverting input of the op-amp. Common-mode input voltage range ±13 V (typ ±14 V) at VCC± = ±15 V; input bias current ±1.8 nA typ; input resistance 33 MΩ typ. Differential input voltage must not exceed ±30 V.",
   "is_pin1": false,
   "source": {
    "geometry": "DIP-8_W7.62mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "3",
   "kind": "thru_hole",
   "shape": "circle",
   "at": [
    0.0,
    5.08
   ],
   "rot": 0.0,
   "size": [
    1.6,
    1.6
   ],
   "layers": [],
   "thermal": false,
   "pin": "3",
   "name": "IN+",
   "type": "input",
   "description": "Non-inverting input of the op-amp. Common-mode input voltage range ±13 V (typ ±14 V) at VCC± = ±15 V; input bias current ±1.8 nA typ; input resistance 33 MΩ typ.",
   "is_pin1": false,
   "source": {
    "geometry": "DIP-8_W7.62mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "4",
   "kind": "thru_hole",
   "shape": "circle",
   "at": [
    0.0,
    7.62
   ],
   "rot": 0.0,
   "size": [
    1.6,
    1.6
   ],
   "layers": [],
   "thermal": false,
   "pin": "4",
   "name": "VCC-",
   "type": "power_in",
   "description": "Negative supply rail. Recommended operating range −3 V to −18 V; absolute maximum −22 V. Together with VCC+ powers the op-amp; total supply typically ±15 V for characterization.",
   "is_pin1": false,
   "source": {
    "geometry": "DIP-8_W7.62mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "5",
   "kind": "thru_hole",
   "shape": "circle",
   "at": [
    7.62,
    7.62
   ],
   "rot": 0.0,
   "size": [
    1.6,
    1.6
   ],
   "layers": [],
   "thermal": false,
   "pin": "5",
   "name": "NC",
   "type": "unconnected",
   "description": "No internal connection. Leave floating or tie to a convenient node; not bonded to the die.",
   "is_pin1": false,
   "source": {
    "geometry": "DIP-8_W7.62mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "6",
   "kind": "thru_hole",
   "shape": "circle",
   "at": [
    7.62,
    5.08
   ],
   "rot": 0.0,
   "size": [
    1.6,
    1.6
   ],
   "layers": [],
   "thermal": false,
   "pin": "6",
   "name": "OUT",
   "type": "output",
   "description": "Op-amp output. Peak output voltage ±13 V typ (RL ≥ 10 kΩ) at VCC± = ±15 V; large-signal voltage amplification 400 V/mV typ; slew rate 0.3 V/µs; unity-gain bandwidth 0.6 MHz typ. Short-circuit to ground or either supply is permitted indefinitely.",
   "is_pin1": false,
   "source": {
    "geometry": "DIP-8_W7.62mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "7",
   "kind": "thru_hole",
   "shape": "circle",
   "at": [
    7.62,
    2.54
   ],
   "rot": 0.0,
   "size": [
    1.6,
    1.6
   ],
   "layers": [],
   "thermal": false,
   "pin": "7",
   "name": "VCC+",
   "type": "power_in",
   "description": "Positive supply rail. Recommended operating range +3 V to +18 V; absolute maximum +22 V. Also serves as the wiper reference for the external 20 kΩ offset-null potentiometer.",
   "is_pin1": false,
   "source": {
    "geometry": "DIP-8_W7.62mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "8",
   "kind": "thru_hole",
   "shape": "circle",
   "at": [
    7.62,
    0.0
   ],
   "rot": 0.0,
   "size": [
    1.6,
    1.6
   ],
   "layers": [],
   "thermal": false,
   "pin": "8",
   "name": "OFFSET N2",
   "type": "passive",
   "description": "Offset null terminal 2. Connect a 20 kΩ potentiometer between OFFSET N1 (pin 1) and OFFSET N2 (pin 8) with the wiper tied to VCC+ to null the input offset voltage.",
   "is_pin1": false,
   "source": {
    "geometry": "DIP-8_W7.62mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  }
 ]
}