← Commit history

oc5800l: restore the component block (pinout + model declarations) from this page's own README and symbol

Ray ·aaa2297384 · ·parent 6323ff7
1 file changed +81−1
page.json+81−1
@@ -33,5 +33,85 @@   "author": {     "name": "Ray",     "email": "[email protected]"+  },+  "component": {+    "mpn": "OC5800L",+    "manufacturer": "OCX",+    "package": "SOP-8",+    "pin_count": 9,+    "category": "DC-DC Converters",+    "parts": {+      "symbol": "oc5800l.kicad_sym",+      "footprint": "oc5800l.kicad_mod",+      "model_3d": "oc5800l-etched.glb",+      "model_3d_plain": "oc5800l.glb",+      "model_3d_step": "oc5800l-etched.step",+      "model_3d_step_plain": "oc5800l.step",+      "lbr": "oc5800l.lbr"+    },+    "pins": [+      {+        "number": "1",+        "name": "VIN",+        "type": "power_in",+        "description": "Drain of the internal 100V/5A power MOSFET; connect to the input power supply (8V-90V, absolute max 100V). The exposed thermal pad is internally tied to this pin."+      },+      {+        "number": "2",+        "name": "VDD",+        "type": "power_in",+        "description": "Chip bias supply input. Internally clamped at ~33V (I_VDD < 10mA); UVLO rising threshold 4.5V, falling 3V. Typically fed from VIN through a series resistor and a 12V Zener clamp."+      },+      {+        "number": "3",+        "name": "FB1",+        "type": "input",+        "description": "Positive-side output-voltage feedback sense pin. With FB2 forms the CV feedback loop; regulated (FB1-FB2) differential voltage is typically 397 mV. Absolute max -0.3 to 6 V."+      },+      {+        "number": "4",+        "name": "FB2",+        "type": "input",+        "description": "Negative-side output-voltage feedback sense pin. Paired with FB1 in the resistor-divider network that sets VOUT = ((R3+R1)/R1)*VFB. Absolute max -0.3 to 6 V."+      },+      {+        "number": "5",+        "name": "VCC",+        "type": "power_out",+        "description": "Internal 5V LDO output (typ. 5.5 V); connect a decoupling capacitor (typ. 4.7 µF) to GND. Absolute max -0.3 to 6 V; not intended to drive external loads."+      },+      {+        "number": "6",+        "name": "GND",+        "type": "power_in",+        "description": "Chip ground reference for all internal circuitry and feedback resistor networks."+      },+      {+        "number": "7",+        "name": "VSEN",+        "type": "input",+        "description": "Inductor current sense input. A sense resistor between VSEN and GND sets the maximum output current: IOUT_MAX = VCS/R5, where VCS typ. 150 mV (145-155 mV). Also used for cycle-by-cycle current limit (VCS_LMT ≈ 300 mV). Absolute max -0.3 to 6 V."+      },+      {+        "number": "8",+        "name": "VSEND",+        "type": "output",+        "description": "Source of the internal power MOSFET (switch node). Connects to the external freewheeling Schottky (e.g. SS510) and to the buck inductor. Absolute max -0.3 to 6 V referenced per datasheet (see notes)."+      },+      {+        "number": "EP",+        "name": "EP/Thermal Pad",+        "type": "power_in",+        "description": "Exposed thermal pad on the bottom of the ESOP-8 package. Internally connected to VIN (pin 1); solder to the VIN copper plane for heat dissipation. Package max dissipation P_ESOP8 = 1 W.",+        "thermal_pad": true+      }+    ],+    "provenance": {+      "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }   }-}\ No newline at end of file+}