main
Ray
Publish 0.1.2
c2a129a
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174
{
"slug": "oc5228",
"version": "0.1.2",
"type": "component",
"description": "OCX Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOP-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.",
"tags": [
"component",
"pmic",
"oc5228"
],
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"oc5228.kicad_sym",
"oc5228.kicad_mod",
"oc5228.glb",
"oc5228.step",
"oc5228.lbr",
"docs/hero.png",
"docs/oc5228-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html",
"oc5228-etched.step",
"oc5228-hero.glb",
"oc5228-hero.overlay.json"
],
"visibility": "public",
"author": {
"name": "Ray"
},
"component": {
"mpn": "OC5228",
"manufacturer": "OCX",
"package": "SOP-8",
"pin_count": 8,
"category": "Voltage Regulators - Linear, Low Drop Out (LDO) Regulators",
"parts": {
"symbol": "oc5228.kicad_sym",
"footprint": "oc5228.kicad_mod",
"model_3d": "oc5228-hero.glb",
"model_3d_plain": "oc5228.glb",
"model_3d_step": "oc5228-etched.step",
"model_3d_step_plain": "oc5228.step",
"lbr": "oc5228.lbr"
},
"pins": [
{
"number": "1",
"name": "LD",
"type": "input",
"description": "Analog / segmented dimming control input. Floating = full brightness (high mode); tied to VDD = 1/2 current low-brightness mode; 0.2V-1.2V analog input sets output current (linear analog dimming); below 0.2V shuts output off. Can also accept PWM with high level > 1.2V. Internal 20uA pull-down (ILD_F) supports segmented dimming."
},
{
"number": "2",
"name": "PWM",
"type": "input",
"description": "PWM dimming input. High level enables output, low disables it; supports ultra-small duty ratios with a minimum response pulse width of 60ns. Rising threshold VPWM_H = 1.4V typ, falling VDIM_L = 0.8V typ. Pin floats to logic-high (output enabled) by default."
},
{
"number": "3",
"name": "VDD",
"type": "power_in",
"description": "Chip supply pin. Powered via an external bleeder resistor R3 from VIN; internally clamped by a 5.5V shunt (VDDCLAMP typ 5.5V, IDDCLAMP max 10mA). Startup occurs when VDD reaches ~4.1V. Requires >=1.0uF bypass capacitor placed close to the pin. Operating current IDD ~2.5mA at VDD = 5.5V; quiescent IVDDQ ~1.2mA."
},
{
"number": "4",
"name": "CS",
"type": "input",
"description": "Current-sense input. Connects to the source-side sense resistor Rcs; output current is regulated to Iout = 0.2V / Rcs. Constant-current reference VREF = 200mV typ (192-208mV); over-current threshold VCS = 216-264mV. Leading-edge blanking TLEB = 120ns typ. Absolute max VCS = -0.3 to 7.0V."
},
{
"number": "5",
"name": "D",
"type": "output",
"description": "Drain of the internal 100V / 2A power MOSFET (switching node). RDS(on) = 200 mOhm typ at VGS = 5.5V; VDS rating 100V. Pins 5 and 6 are tied together internally and both must be connected to the inductor / freewheel-diode switch node."
},
{
"number": "6",
"name": "D",
"type": "output",
"description": "Drain of the internal 100V / 2A power MOSFET (switching node), tied to pin 5. Connect both D pins together to the inductor / catch-diode node to share switch current."
},
{
"number": "7",
"name": "GND",
"type": "power_in",
"description": "Device ground / power return. Pins 7 and 8 are both GND and should be tied together to the system ground plane close to the CS sense resistor to minimize sense-loop noise."
},
{
"number": "8",
"name": "GND",
"type": "power_in",
"description": "Device ground / power return, tied to pin 7. Provides the return for internal control and MOS driver. Both GND pins must be connected on the board."
}
],
"provenance": {
"rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction",
"cad": "KiCad official (CC-BY-SA 4.0)",
"cad_basis": {
"from": [
"README CAD section (factory cad_wording)",
".kicad_mod model path agrees"
],
"missing": []
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"distributor_links": {
"digikey": false,
"mouser": false
},
"distributor_check": {
"checked_at": "2026-10-05T19:12:42Z",
"source": "Component Ocean /api/assign-pns + lcsc_map",
"digikey": {
"pn": null,
"status": "no match"
},
"mouser": {
"pn": null,
"status": "no match"
}
},
"models_3d": [
{
"file": "oc5228.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
6,
4.9,
1.75
],
"zmin_mm": 0,
"centre_offset_mm": 0,
"footprint_binding": "identity",
"sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",
"checked": "2026-10-07",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "oc5228-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
6,
4.9,
1.75
],
"zmin_mm": 0,
"centre_offset_mm": 0,
"footprint_binding": "identity",
"sha256": "22e2ea204e3c24bfc8e39684143d13888488a39e3b6e3679150f74941c1ab855",
"checked": "2026-10-07",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
]
},
"org": "adom"
}