main
Ray Publish 0.1.2 c2a129a
{
  "slug": "oc5228",
  "version": "0.1.2",
  "type": "component",
  "description": "OCX Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOP-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "pmic",
    "oc5228"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "oc5228.kicad_sym",
    "oc5228.kicad_mod",
    "oc5228.glb",
    "oc5228.step",
    "oc5228.lbr",
    "docs/hero.png",
    "docs/oc5228-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "oc5228-etched.step",
    "oc5228-hero.glb",
    "oc5228-hero.overlay.json"
  ],
  "component": {
    "mpn": "OC5228",
    "manufacturer": "OCX",
    "package": "SOP-8",
    "pin_count": 8,
    "category": "Voltage Regulators - Linear, Low Drop Out (LDO) Regulators",
    "parts": {
      "symbol": "oc5228.kicad_sym",
      "footprint": "oc5228.kicad_mod",
      "model_3d": "oc5228-hero.glb",
      "model_3d_plain": "oc5228.glb",
      "model_3d_step": "oc5228-etched.step",
      "model_3d_step_plain": "oc5228.step",
      "lbr": "oc5228.lbr"
    },
    "pins": [
      {
        "number": "1",
        "name": "LD",
        "type": "input",
        "description": "Analog / segmented dimming control input. Floating = full brightness (high mode); tied to VDD = 1/2 current low-brightness mode; 0.2V-1.2V analog input sets output current (linear analog dimming); below 0.2V shuts output off. Can also accept PWM with high level > 1.2V. Internal 20uA pull-down (ILD_F) supports segmented dimming."
      },
      {
        "number": "2",
        "name": "PWM",
        "type": "input",
        "description": "PWM dimming input. High level enables output, low disables it; supports ultra-small duty ratios with a minimum response pulse width of 60ns. Rising threshold VPWM_H = 1.4V typ, falling VDIM_L = 0.8V typ. Pin floats to logic-high (output enabled) by default."
      },
      {
        "number": "3",
        "name": "VDD",
        "type": "power_in",
        "description": "Chip supply pin. Powered via an external bleeder resistor R3 from VIN; internally clamped by a 5.5V shunt (VDDCLAMP typ 5.5V, IDDCLAMP max 10mA). Startup occurs when VDD reaches ~4.1V. Requires >=1.0uF bypass capacitor placed close to the pin. Operating current IDD ~2.5mA at VDD = 5.5V; quiescent IVDDQ ~1.2mA."
      },
      {
        "number": "4",
        "name": "CS",
        "type": "input",
        "description": "Current-sense input. Connects to the source-side sense resistor Rcs; output current is regulated to Iout = 0.2V / Rcs. Constant-current reference VREF = 200mV typ (192-208mV); over-current threshold VCS = 216-264mV. Leading-edge blanking TLEB = 120ns typ. Absolute max VCS = -0.3 to 7.0V."
      },
      {
        "number": "5",
        "name": "D",
        "type": "output",
        "description": "Drain of the internal 100V / 2A power MOSFET (switching node). RDS(on) = 200 mOhm typ at VGS = 5.5V; VDS rating 100V. Pins 5 and 6 are tied together internally and both must be connected to the inductor / freewheel-diode switch node."
      },
      {
        "number": "6",
        "name": "D",
        "type": "output",
        "description": "Drain of the internal 100V / 2A power MOSFET (switching node), tied to pin 5. Connect both D pins together to the inductor / catch-diode node to share switch current."
      },
      {
        "number": "7",
        "name": "GND",
        "type": "power_in",
        "description": "Device ground / power return. Pins 7 and 8 are both GND and should be tied together to the system ground plane close to the CS sense resistor to minimize sense-loop noise."
      },
      {
        "number": "8",
        "name": "GND",
        "type": "power_in",
        "description": "Device ground / power return, tied to pin 7. Provides the return for internal control and MOS driver. Both GND pins must be connected on the board."
      }
    ],
    "provenance": {
      "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction",
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "cad_basis": {
        "from": [
          "README CAD section (factory cad_wording)",
          ".kicad_mod model path agrees"
        ],
        "missing": []
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "distributor_links": {
      "digikey": false,
      "mouser": false
    },
    "distributor_check": {
      "checked_at": "2026-10-05T19:12:42Z",
      "source": "Component Ocean /api/assign-pns + lcsc_map",
      "digikey": {
        "pn": null,
        "status": "no match"
      },
      "mouser": {
        "pn": null,
        "status": "no match"
      }
    },
    "models_3d": [
      {
        "file": "oc5228.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6,
          4.9,
          1.75
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "oc5228-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6,
          4.9,
          1.75
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "22e2ea204e3c24bfc8e39684143d13888488a39e3b6e3679150f74941c1ab855",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  },
  "visibility": "public"
}