main
Ray
Publish 0.1.0
3c3404d
OB3398MP
OB(On-Bright Elec) · LED Drivers · SOT23-5
OB3398MP from OB(On-Bright Elec), in a SOT23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GATE | output | Gate driver output that drives the power MOSFET, with output low level VOL of 1 V and output high level VOH of 6 V at VDD=14 V, and output clamp voltage of 10 V. |
| 2 | CS | input | Current sense input that receives the switch current through the sense resistor Rs, with over current threshold Vth_oc of 492 to 508 mV (500 mV typ.) and LEB time of 500 ns. |
| 3 | VDD | power_in | Power supply input with recommended VDD supply voltage of 12 to 25 V, UVLO(ON) of 7.3 to 9.3 V falling and UVLO(OFF) of 15.5 to 17.5 V rising, and maximum VDD operation voltage (VDD_clamp) of 25 V. |
| 4 | FB | input | Feedback input connected to a resistor divider from the primary or auxiliary winding to reflect output voltage, regulated at 1.2 V typ. with an over-voltage protection threshold of about 1.4 V typ. |
| 5 | GND | power_in | Ground reference pin for the controller. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | OB(On-Bright Elec) |
| Package | SOT23-5 |
| Category | LED Drivers |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Startup Current | I startup | 4 | 20 | uA | VDD=UVLO_OFF-1V | 5 | |
| Operation Current | I DD op | 0.45 | 1 | mA | FB=1V, CS=0V, VDD=20V | 5 | |
| VDD Under Voltage Lockout (ON) | UVLO(ON) | 7.3 | 8.3 | 9.3 | V | Enter VDD falling | 5 |
| VDD Under Voltage Lockout (OFF) | UVLO(OFF) | 15.5 | 16.5 | 17.5 | V | Exit VDD rising | 5 |
| Maximum VDD operation voltage | VDD_clamp | 25 | V | IDD=20mA | 5 | ||
| LEB time | TLEB | 500 | ns | 5 | |||
| Over current threshold | Vth_oc | 492 | 500 | 508 | mV | 5 | |
| OCP Propagation delay | Td_oc | 100 | ns | 5 | |||
| IC Maximum frequency | Freq_Max | 103 | KHz | Internal maximum clock frequency (see note 1) | 5 | ||
| Minimum Toff | Toff_min | 4 | us | 5 | |||
| Minimum frequency | F_min | 103 | Hz | 5 | |||
| Frequency shuffling range | Δf/Freq | -7 | 7 | % | 5 | ||
| Reference voltage for EA | Vref_EA | 1.14 | 1.2 | 1.26 | V | 5 | |
| DC gain of EA | Gain | 40 | 5 | ||||
| Load OVP threshold voltage | Vth_OVP | 1.4 | V | 5 | |||
| Output low level | VOL | 1 | V | VDD=14V, Io=5mA | 5 | ||
| Output high level | VOH | 6 | V | VDD=14V, Io=20mA | 5 | ||
| Output clamp voltage | V_clamping | 10 | V | 5 | |||
| Output rising time | T_r | 95 | ns | 1V~9V @ CL=500pF | 5 | ||
| Output falling time | T_f | 50 | ns | 9V~1V @ CL=500pF | 5 | ||
| Over temperature protection trigger point | T_otp | 135 | ℃ | 5 | |||
| Over temperature protection recovery point | T_otp_rec | 120 | ℃ | 5 | |||
| Gate Voltage | -0.3 | 25 | V | 2 | |||
| VDD Voltage | -0.3 | V | Upper limit is VDD_clamp | 2 | |||
| CS Input Voltage | -0.3 | 7 | V | 2 | |||
| FB Input Voltage | -0.3 | 7 | V | 2 | |||
| Operating Junction Temperature | TJ | -40 | 150 | ℃ | 2 | ||
| Operating Ambient Temperature | TA | -40 | 85 | ℃ | 2 | ||
| Storage Temperature | Tstg | -55 | 150 | ℃ | 2 | ||
| Lead Temperature (Soldering) | 260 | ℃ | 10 secs | 2 | |||
| VDD Supply Voltage | VDD | 12 | 25 | V | 2 | ||
| Thermal resistance junction-to-ambient, SOT23-5 | RθJA | 200 | ℃/W | SOT23-5 | 2 |
CAD (KiCad official)
- Symbol:
OB3398MP - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT23-5, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.225 mm tall, datasheet A, midpoint of min and max). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
ob3398mp-etched.step/ob3398mp-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ob3398mp.step/ob3398mp.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: OB(On-Bright Elec) datasheet (10 pp, sha256
e7ea5aefccaa465e, retrieved 2026-11-12, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# OB3398MP
**OB(On-Bright Elec)** · LED Drivers · SOT23-5
OB3398MP from OB(On-Bright Elec), in a SOT23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GATE | output | Gate driver output that drives the power MOSFET, with output low level VOL of 1 V and output high level VOH of 6 V at VDD=14 V, and output clamp voltage of 10 V. |
| 2 | CS | input | Current sense input that receives the switch current through the sense resistor Rs, with over current threshold Vth_oc of 492 to 508 mV (500 mV typ.) and LEB time of 500 ns. |
| 3 | VDD | power_in | Power supply input with recommended VDD supply voltage of 12 to 25 V, UVLO(ON) of 7.3 to 9.3 V falling and UVLO(OFF) of 15.5 to 17.5 V rising, and maximum VDD operation voltage (VDD_clamp) of 25 V. |
| 4 | FB | input | Feedback input connected to a resistor divider from the primary or auxiliary winding to reflect output voltage, regulated at 1.2 V typ. with an over-voltage protection threshold of about 1.4 V typ. |
| 5 | GND | power_in | Ground reference pin for the controller. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | OB(On-Bright Elec) |
| Package | SOT23-5 |
| Category | LED Drivers |
| Pins | 5 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Startup Current | I startup | | 4 | 20 | uA | VDD=UVLO_OFF-1V | 5 |
| Operation Current | I DD op | | 0.45 | 1 | mA | FB=1V, CS=0V, VDD=20V | 5 |
| VDD Under Voltage Lockout (ON) | UVLO(ON) | 7.3 | 8.3 | 9.3 | V | Enter VDD falling | 5 |
| VDD Under Voltage Lockout (OFF) | UVLO(OFF) | 15.5 | 16.5 | 17.5 | V | Exit VDD rising | 5 |
| Maximum VDD operation voltage | VDD_clamp | | | 25 | V | IDD=20mA | 5 |
| LEB time | TLEB | | 500 | | ns | | 5 |
| Over current threshold | Vth_oc | 492 | 500 | 508 | mV | | 5 |
| OCP Propagation delay | Td_oc | | 100 | | ns | | 5 |
| IC Maximum frequency | Freq_Max | | 103 | | KHz | Internal maximum clock frequency (see note 1) | 5 |
| Minimum Toff | Toff_min | | 4 | | us | | 5 |
| Minimum frequency | F_min | | 103 | | Hz | | 5 |
| Frequency shuffling range | Δf/Freq | -7 | | 7 | % | | 5 |
| Reference voltage for EA | Vref_EA | 1.14 | 1.2 | 1.26 | V | | 5 |
| DC gain of EA | Gain | | 40 | | | | 5 |
| Load OVP threshold voltage | Vth_OVP | | 1.4 | | V | | 5 |
| Output low level | VOL | | 1 | | V | VDD=14V, Io=5mA | 5 |
| Output high level | VOH | | 6 | | V | VDD=14V, Io=20mA | 5 |
| Output clamp voltage | V_clamping | | 10 | | V | | 5 |
| Output rising time | T_r | | 95 | | ns | 1V~9V @ CL=500pF | 5 |
| Output falling time | T_f | | 50 | | ns | 9V~1V @ CL=500pF | 5 |
| Over temperature protection trigger point | T_otp | | 135 | | ℃ | | 5 |
| Over temperature protection recovery point | T_otp_rec | | 120 | | ℃ | | 5 |
| Gate Voltage | | -0.3 | | 25 | V | | 2 |
| VDD Voltage | | -0.3 | | | V | Upper limit is VDD_clamp | 2 |
| CS Input Voltage | | -0.3 | | 7 | V | | 2 |
| FB Input Voltage | | -0.3 | | 7 | V | | 2 |
| Operating Junction Temperature | TJ | -40 | | 150 | ℃ | | 2 |
| Operating Ambient Temperature | TA | -40 | | 85 | ℃ | | 2 |
| Storage Temperature | Tstg | -55 | | 150 | ℃ | | 2 |
| Lead Temperature (Soldering) | | | | 260 | ℃ | 10 secs | 2 |
| VDD Supply Voltage | VDD | 12 | | 25 | V | | 2 |
| Thermal resistance junction-to-ambient, SOT23-5 | RθJA | | 200 | | ℃/W | SOT23-5 | 2 |
## CAD (KiCad official)
- Symbol: `OB3398MP`
- Footprint: `Package_TO_SOT_SMD:SOT-23-5`
- 3D model: SOT23-5, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.225 mm tall, datasheet A, midpoint of min and max). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files: `ob3398mp-etched.step` / `ob3398mp-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ob3398mp.step` / `ob3398mp.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [OB(On-Bright Elec) datasheet](docs/ob3398mp-datasheet.pdf) (10 pp, sha256 `e7ea5aefccaa465e`, retrieved 2026-11-12, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/ob3398mp-datasheet.pdf)