main
Ray
ob3379zcpa-d: laser-etched CAD + chip hero (factory 2.0.0 backfill)
d878924
OB3379ZCPA-D
OB On Bright Elec · LED Drivers · SOP-8
OB3379ZCPA-D from OB On Bright Elec, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | LPF | bidirectional | Low-pass filter pin for PWM-to-analog dimming. When HPWM dimming frequency is 10kHz-40kHz, LPF pin is left floating; when HPWM frequency is 200Hz-10kHz, a capacitor from LPF to GND is recommended to reduce output current ripple. |
| 2 | HPWM | input | HPWM signal input pin for PWM-to-analog dimming control. Input thresholds: high >=2.5V, low <=1.3V. Supports 200Hz to 40kHz dimming frequency. |
| 3 | ZVS | input | Quasi-Resonant (zero-voltage switching) detect signal input. Also used for LED open protection with a threshold Vth_ZVS typically 4V (3.8-4.2V). |
| 4 | CS | input | Current sense terminal. Senses the primary MOSFET source current across an external sense resistor. Over-current threshold Vth_ocp typ. 0.8V; leading-edge blanking ~350ns. |
| 5 | DRAIN | power_out | Drain of the integrated high-voltage MOSFET (BVdss = 100V min). Connects to the switching node of the buck converter (inductor/freewheeling diode). |
| 6 | VIN | power_in | Power supply input. Recommended operating range 9V to 30V (absolute max 35V). UVLO turn-on ~7.2V, UVLO release ~8V. |
| 7 | ADIM | input | Analog dimming input. The voltage on ADIM sets the internal reference that determines the LED current. Recommended range 0V to 5V; inner clamp ~250mV at ADIM=2.5V. |
| 8 | GND | power_in | Power ground reference for the controller and integrated MOSFET source return. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | OB On Bright Elec |
| Package | SOP-8 |
| Category | LED-drv |
| Pins | 8 |
Ordering variants
Same part, different packaging or reel option.
OB3379ZCP-DOB3379ZCPA-DOB3379YCP-DOB3379YCPA-D
CAD (KiCad official)
- Symbol:
OB3379ZCPA-D - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
ob3379zcpa-d-etched.step/ob3379zcpa-d-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ob3379zcpa-d.step/ob3379zcpa-d.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: OB On Bright Elec datasheet (11 pp, sha256
3be4d3dce87cc9b3, retrieved 2026-08-17, tier: lcsc) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# OB3379ZCPA-D
**OB On Bright Elec** · LED Drivers · SOP-8
OB3379ZCPA-D from OB On Bright Elec, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | LPF | bidirectional | Low-pass filter pin for PWM-to-analog dimming. When HPWM dimming frequency is 10kHz-40kHz, LPF pin is left floating; when HPWM frequency is 200Hz-10kHz, a capacitor from LPF to GND is recommended to reduce output current ripple. |
| 2 | HPWM | input | HPWM signal input pin for PWM-to-analog dimming control. Input thresholds: high >=2.5V, low <=1.3V. Supports 200Hz to 40kHz dimming frequency. |
| 3 | ZVS | input | Quasi-Resonant (zero-voltage switching) detect signal input. Also used for LED open protection with a threshold Vth_ZVS typically 4V (3.8-4.2V). |
| 4 | CS | input | Current sense terminal. Senses the primary MOSFET source current across an external sense resistor. Over-current threshold Vth_ocp typ. 0.8V; leading-edge blanking ~350ns. |
| 5 | DRAIN | power_out | Drain of the integrated high-voltage MOSFET (BVdss = 100V min). Connects to the switching node of the buck converter (inductor/freewheeling diode). |
| 6 | VIN | power_in | Power supply input. Recommended operating range 9V to 30V (absolute max 35V). UVLO turn-on ~7.2V, UVLO release ~8V. |
| 7 | ADIM | input | Analog dimming input. The voltage on ADIM sets the internal reference that determines the LED current. Recommended range 0V to 5V; inner clamp ~250mV at ADIM=2.5V. |
| 8 | GND | power_in | Power ground reference for the controller and integrated MOSFET source return. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | OB On Bright Elec |
| Package | SOP-8 |
| Category | LED-drv |
| Pins | 8 |
## Ordering variants
Same part, different packaging or reel option.
- `OB3379ZCP-D`
- `OB3379ZCPA-D`
- `OB3379YCP-D`
- `OB3379YCPA-D`
## CAD (KiCad official)
- Symbol: `OB3379ZCPA-D`
- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`
- 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files: `ob3379zcpa-d-etched.step` / `ob3379zcpa-d-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ob3379zcpa-d.step` / `ob3379zcpa-d.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [OB On Bright Elec datasheet](docs/ob3379zcpa-d-datasheet.pdf) (11 pp, sha256 `3be4d3dce87cc9b3`, retrieved 2026-08-17, tier: lcsc)
- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/ob3379zcpa-d-datasheet.pdf)