component
OB3379AZCPA-D
Public Made by Adomby adom
OB(On-Bright Elec) LED Drivers, SOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
Generated by kicad-footprint-generator · KiCad file format 20260206
| Name | Last updated |
|---|---|
| docs | 4d ago |
| viewers | 4d ago |
| ob3379azcpa-d-etched.glb | 4d ago |
| ob3379azcpa-d-etched.step | 4d ago |
| ob3379azcpa-d-hero.glb | 4d ago |
| ob3379azcpa-d-hero.overlay.json | 4d ago |
| ob3379azcpa-d.glb | 4d ago |
| ob3379azcpa-d.kicad_mod | 4d ago |
| ob3379azcpa-d.kicad_sym | 4d ago |
| ob3379azcpa-d.lbr | 4d ago |
| ob3379azcpa-d.step | 4d ago |
| package.json | 4d ago |
| page.json | 4d ago |
| README.md | 4d ago |
OB3379AZCPA-D
OB(On-Bright Elec) · LED Drivers · SOP-8
OB3379AZCPA-D from OB(On-Bright Elec), in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | LPF | passive | Low-pass filter pin for PWM-to-analog dimming: left floating for HPWM between 10kHz and 40kHz, and for 200Hz to 10kHz a capacitor to GND is suggested to reduce output current ripple. |
| 2 | HPWM | input | HPWM signal input for PWM-to-analog dimming control, enabled above about 2.5V (high threshold 2.5V, low 1.3V) with an internal 3.8M ohm pull-down and 200Hz to 40kHz dimming frequency range. |
| 3 | ZVS | input | Quasi-resonant zero-voltage/demagnetization detection input, with LED open protection threshold of 4V typical (3.8V to 4.2V) and a rating of -0.7V to 35V. |
| 4 | CS | input | Current sensing terminal where the LED current sense resistor connects to GND, with 0.8V over-current threshold, 1.5V diode/inductor short threshold, 2V CS-open threshold and -0.3V to 7V rating. |
| 5 | DRAIN | passive | Drain of the internal MOSFET (100V BVdss), rated -0.3V to BVdss. |
| 6 | VIN | power_in | Power supply input, 9V to 30V operating range with UVLO exit at 8V typical and enter at 7.2V typical, absolute maximum 35V. |
| 7 | ADIM | input | Analog dimming input (0V to 5V) whose voltage sets the internal reference that determines LED current; a capacitor from ADIM to GND provides external soft start. |
| 8 | GND | power_in | Power ground. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | OB(On-Bright Elec) |
| Package | SOP-8 |
| Category | LED Drivers |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input voltage range | Vin | 9 | 30 | V | VIN=12V, HPWM=5V, TA=25℃ | 5 | |
| Operating supply current | IVin | 1.1 | 1.3 | mA | Vin=12V,HPWM=5V no load | 5 | |
| Stand by current | IVin_stb | 30 | 40 | uA | HPWM low >15ms sleep mode | 5 | |
| Vin UVLO exit (recovery) | UVLO(OFF) | 7 | 8 | 9 | V | 5 | |
| Vin UVLO enter | UVLO(ON) | 6.2 | 7.2 | 8.2 | V | 5 | |
| Max gate off time | Toff max | 504 | 630 | 756 | us | 5 | |
| Max gate on time | Ton max | 40 | 50 | 60 | us | 5 | |
| Reference voltage of Error amplifier | Vth_ea | 245 | 250 | 255 | mV | 5 | |
| Threshold of ZVS pin LED open protection | VthZVS | 3.8 | 4 | 4.2 | V | 5 | |
| MOSFET Drain-Source Breakdown Voltage | BVdss | 100 | V | OB3379AZCP-D | 5 | ||
| ADIM Inner Clamp Voltage | VADIM | 250 | mV | ADIM=2.5V | 5 | ||
| ADIM source current | IADIM_up | 1 | uA | 5 | |||
| HPWM Input Threshold high | HPWM(high) | 2.5 | V | High Level | 5 | ||
| HPWM Input Threshold low | HPWM(low) | 1.3 | V | Low Level | 5 | ||
| Sleep mode time | T_sleep | 15 | ms | 5 | |||
| Threshold of over current protection | Vthocp | 0.8 | V | 5 | |||
| Max frequency | F max | 230 | KHz | 5 | |||
| Time of leading edge blanking | Tleb | 400 | ns | 5 | |||
| Threshold of diode & inductor short protection | Vthcs_high1 | 1.5 | V | 5 | |||
| Threshold of CS pin open protection | Vthcs_high2 | 2 | V | 5 | |||
| Temperature of thermal shutdown | TOTP_ON | 150 | ℃ | 5 | |||
| Temperature of thermal shutdown release | TOTP_OFF | 100 | ℃ | 5 | |||
| VIN, ADIM, HPWM, LPF to GND | -0.3 | 35 | V | 2 | |||
| ZVS to GND | -0.7 | 35 | V | 2 | |||
| CS to GND | -0.3 | 7 | V | 2 | |||
| DRAIN to GND | -0.3 | V | upper limit BVdss | 2 | |||
| Operating Ambient Temp. | TA | -40 | 85 | ℃ | 2 | ||
| Operating Junction Temp. | TJ | -40 | 150 | ℃ | 2 | ||
| Storage Temp. | Tstg | -55 | 150 | ℃ | 2 | ||
| Lead Temp. | 260 | ℃ | 10 Sec | 2 | |||
| Vin Voltage | Vin | 9 | 30 | V | 2 | ||
| ADIM Voltage | 0 | 5 | V | 2 | |||
| ZVS Positive Plateau Voltage | 0.6 | 4 | V | 0.6V to VthZVS | 2 | ||
| Thermal resistance junction to ambient | RθJA | 110 | ℃/W | SOP8 | 2 |
CAD (KiCad official)
- Symbol:
OB3379AZCPA-D - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
ob3379azcpa-d-etched.step/ob3379azcpa-d-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ob3379azcpa-d.step/ob3379azcpa-d.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: OB(On-Bright Elec) datasheet (11 pp, sha256
64a8ac42cebd3d9b, retrieved 2026-10-22, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).