OB2530PAP

{
  "slug": "ob2530pap",
  "version": "0.1.0",
  "type": "component",
  "description": "OB On Bright Elec AC-DC Controllers And Regulators, DIP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power management (pmic)",
    "ob2530pap",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "ob2530pap.kicad_sym",
    "ob2530pap.kicad_mod",
    "ob2530pap.glb",
    "ob2530pap.step",
    "ob2530pap.lbr",
    "docs/hero.png",
    "docs/ob2530pap-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "ob2530pap-hero.glb",
    "ob2530pap-hero.overlay.json",
    "ob2530pap-etched.glb"
  ],
  "component": {
    "mpn": "OB2530PAP",
    "manufacturer": "OB On Bright Elec",
    "package": "DIP-8",
    "pin_count": 8,
    "category": "Power Management (PMIC)",
    "subcategory": "AC-DC Controllers And Regulators",
    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588918409857798144",
    "parts": {
      "symbol": "ob2530pap.kicad_sym",
      "footprint": "ob2530pap.kicad_mod",
      "model_3d": "ob2530pap-hero.glb",
      "model_3d_plain": "ob2530pap-etched.glb",
      "model_3d_step": "ob2530pap-etched.step",
      "model_3d_step_plain": "ob2530pap.step",
      "lbr": "ob2530pap.lbr"
    },
    "distributor_links": {
      "lcsc": "C78848"
    },
    "distributor_check": {
      "checked_at": "2026-10-16T01:53:13Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": null,
        "status": "no match"
      },
      "mouser": {
        "pn": null,
        "status": "no match"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "VDD",
        "type": "power_in",
        "description": "Power supply input: recommended VDD is 8 to 25 V, absolute maximum is -0.3 to 28 V, and VDD over-voltage protection trips at 26.0 to 28.0 V (27.0 V typ)."
      },
      {
        "number": "2",
        "name": "NC",
        "type": "unconnected",
        "description": "Listed as NC in the terminal assignment table, so no function is stated for this pin."
      },
      {
        "number": "3",
        "name": "INV",
        "type": "input",
        "description": "Voltage feedback from the auxiliary winding through a resistor divider that reflects the output voltage; reference is Vref 2.475 to 2.525 V (2.500 V typ) and absolute maximum input is -0.3 to 7 V."
      },
      {
        "number": "4",
        "name": "CS",
        "type": "input",
        "description": "Power MOSFET source and current-sense input; over-current threshold is 485 to 515 mV at minimum and up to 590 mV at maximum, with 300 ns leading-edge blanking, and absolute maximum input is -0.3 to 7 V."
      },
      {
        "number": "5",
        "name": "Drain",
        "type": "output",
        "description": "Drain of the internal power MOSFET, rated for BVdss of 620 V; absolute maximum off-state drain voltage is -0.3 V to BVdss."
      },
      {
        "number": "6",
        "name": "Drain",
        "type": "output",
        "description": "Drain of the internal power MOSFET (second drain pin, same net as pin 5), rated for BVdss of 620 V."
      },
      {
        "number": "7",
        "name": "GND",
        "type": "power_in",
        "description": "Ground reference for the controller."
      },
      {
        "number": "8",
        "name": "GND",
        "type": "power_in",
        "description": "Ground reference for the controller (second ground pin, same net as pin 7)."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: Operation description (page 7) says the auxiliary voltage is fed via a divider to 'INV (pin 2)', but; The pin map on page 2 is garbled in the text extraction (labels and numbers are not aligned), so the; Pin 2 is NC with no description given in the datasheet; the description is taken from the name alone"
        ],
        "pages_sent": 10,
        "cost_usd": 0.0479,
        "at": "2026-10-16T01:52:57"
      },
      "datasheet": {
        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588918409857798144",
        "pages": 10,
        "sha256": "57dd3d6d34929216",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 8,
        "described": 8,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "ob2530pap.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "body on z = 0, through-hole leads below",
        "extents_mm": [
          7.874,
          9.27,
          6.98
        ],
        "zmin_mm": -3.3,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "4a377a56a8d9e9c0b86c095ef9ecc1869ac19e7f5069a3247b294250bf4f235d",
        "checked": "2026-10-16",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "ob2530pap-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "body on z = 0, through-hole leads below",
        "extents_mm": [
          7.874,
          9.27,
          6.98
        ],
        "zmin_mm": -3.3,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "b3edc2aa8ecb084f09bbe5c35f68d4f7aa9e6225168b45cf50874257be170766",
        "checked": "2026-10-16",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}