component
OB2530PAP
Public Made by Adomby adom
OB On Bright Elec AC-DC Controllers And Regulators, DIP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
OB2530PAP
OB On Bright Elec · AC-DC Controllers And Regulators · DIP-8
OB2530PAP from OB On Bright Elec, in a DIP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD | power_in | Power supply input: recommended VDD is 8 to 25 V, absolute maximum is -0.3 to 28 V, and VDD over-voltage protection trips at 26.0 to 28.0 V (27.0 V typ). |
| 2 | NC | unconnected | Listed as NC in the terminal assignment table, so no function is stated for this pin. |
| 3 | INV | input | Voltage feedback from the auxiliary winding through a resistor divider that reflects the output voltage; reference is Vref 2.475 to 2.525 V (2.500 V typ) and absolute maximum input is -0.3 to 7 V. |
| 4 | CS | input | Power MOSFET source and current-sense input; over-current threshold is 485 to 515 mV at minimum and up to 590 mV at maximum, with 300 ns leading-edge blanking, and absolute maximum input is -0.3 to 7 V. |
| 5 | Drain | output | Drain of the internal power MOSFET, rated for BVdss of 620 V; absolute maximum off-state drain voltage is -0.3 V to BVdss. |
| 6 | Drain | output | Drain of the internal power MOSFET (second drain pin, same net as pin 5), rated for BVdss of 620 V. |
| 7 | GND | power_in | Ground reference for the controller. |
| 8 | GND | power_in | Ground reference for the controller (second ground pin, same net as pin 7). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | OB On Bright Elec |
| Package | DIP-8 |
| Category | Power Management (PMIC) |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Start up current | I start-up | 5 | uA | VDD=UVLO_OFF-1V | 5 | ||
| Static current | I static | 0.85 | 1 | mA | 5 | ||
| VDD under voltage lockout exit | UVLO(OFF) | 15.5 | 16.5 | 17.5 | V | 5 | |
| VDD under voltage lockout enter | UVLO(ON) | 7.3 | 8.3 | 9.3 | V | 5 | |
| VDD over voltage protection | VDD_OVP | 26 | 27 | 28 | V | 5 | |
| Max. Operating Voltage | 25 | V | 5 | ||||
| LEB time | TLEB | 300 | ns | 5 | |||
| Minimum over current threshold | Vth_ocp_min | 485 | 500 | 515 | mV | 5 | |
| Maximum over current threshold | Vth_ocp_max | 590 | mV | 5 | |||
| Reference voltage for feedback threshold | Vref_INV | 2.475 | 2.5 | 2.525 | V | 5 | |
| Minimum Toff | Tpause_min | 2 | us | 5 | |||
| Minimum frequency | F_min | 400 | 445 | 490 | Hz | 5 | |
| Maximum frequency | F_max | 72 | KHz | 5 | |||
| Maximum cable compensation current | Icomp_cable | 40 | 45 | 50 | uA | 5 | |
| Output Over voltage threshold | V_OVP | 2.85 | 3 | 3.15 | V | 5 | |
| Mosfet Drain-Source Breakdown Voltage | BVdss | 620 | V | 5 | |||
| Static drain to source on resistance | Rdson | 4.4 | Ώ | 5 | |||
| VDD Supply Voltage | VDD | 8 | 25 | V | 2 | ||
| Drain Voltage (off state), maximum given as Bvdss | Drain | -0.3 | V | 2 | |||
| VDD Voltage | VDD | -0.3 | 28 | V | 2 | ||
| INV Input Voltage | INV | -0.3 | 7 | V | 2 | ||
| CS Input Voltage | CS | -0.3 | 7 | V | 2 | ||
| Min/Max Operating Junction Temperature | TJ | -40 | 150 | ℃ | 2 | ||
| Operating Ambient Temperature | TA | -40 | 85 | ℃ | 2 | ||
| Min/Max Storage Temperature | Tstg | -55 | 150 | ℃ | 2 | ||
| Lead Temperature (Soldering) | 260 | ℃ | Soldering, 10secs | 2 | |||
| Package thermal resistance, junction to ambient (DIP8) | RθJA | 75 | ℃/W | DIP8 | 2 |
CAD (KiCad official)
- Symbol:
OB2530PAP - Footprint:
Package_DIP:DIP-8_W7.62mm - 3D model: DIP-8 (KiCad packages3D, STEP)
- 3D model files:
ob2530pap-etched.step/ob2530pap-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ob2530pap.step/ob2530pap.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: OB On Bright Elec datasheet (10 pp, sha256
57dd3d6d34929216, retrieved 2026-10-16, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# OB2530PAP
**OB On Bright Elec** · AC-DC Controllers And Regulators · DIP-8
OB2530PAP from OB On Bright Elec, in a DIP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD | power_in | Power supply input: recommended VDD is 8 to 25 V, absolute maximum is -0.3 to 28 V, and VDD over-voltage protection trips at 26.0 to 28.0 V (27.0 V typ). |
| 2 | NC | unconnected | Listed as NC in the terminal assignment table, so no function is stated for this pin. |
| 3 | INV | input | Voltage feedback from the auxiliary winding through a resistor divider that reflects the output voltage; reference is Vref 2.475 to 2.525 V (2.500 V typ) and absolute maximum input is -0.3 to 7 V. |
| 4 | CS | input | Power MOSFET source and current-sense input; over-current threshold is 485 to 515 mV at minimum and up to 590 mV at maximum, with 300 ns leading-edge blanking, and absolute maximum input is -0.3 to 7 V. |
| 5 | Drain | output | Drain of the internal power MOSFET, rated for BVdss of 620 V; absolute maximum off-state drain voltage is -0.3 V to BVdss. |
| 6 | Drain | output | Drain of the internal power MOSFET (second drain pin, same net as pin 5), rated for BVdss of 620 V. |
| 7 | GND | power_in | Ground reference for the controller. |
| 8 | GND | power_in | Ground reference for the controller (second ground pin, same net as pin 7). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | OB On Bright Elec |
| Package | DIP-8 |
| Category | Power Management (PMIC) |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Start up current | I start-up | | | 5 | uA | VDD=UVLO_OFF-1V | 5 |
| Static current | I static | | 0.85 | 1 | mA | | 5 |
| VDD under voltage lockout exit | UVLO(OFF) | 15.5 | 16.5 | 17.5 | V | | 5 |
| VDD under voltage lockout enter | UVLO(ON) | 7.3 | 8.3 | 9.3 | V | | 5 |
| VDD over voltage protection | VDD_OVP | 26 | 27 | 28 | V | | 5 |
| Max. Operating Voltage | | | | 25 | V | | 5 |
| LEB time | TLEB | | 300 | | ns | | 5 |
| Minimum over current threshold | Vth_ocp_min | 485 | 500 | 515 | mV | | 5 |
| Maximum over current threshold | Vth_ocp_max | | | 590 | mV | | 5 |
| Reference voltage for feedback threshold | Vref_INV | 2.475 | 2.5 | 2.525 | V | | 5 |
| Minimum Toff | Tpause_min | 2 | | | us | | 5 |
| Minimum frequency | F_min | 400 | 445 | 490 | Hz | | 5 |
| Maximum frequency | F_max | | | 72 | KHz | | 5 |
| Maximum cable compensation current | Icomp_cable | 40 | 45 | 50 | uA | | 5 |
| Output Over voltage threshold | V_OVP | 2.85 | 3 | 3.15 | V | | 5 |
| Mosfet Drain-Source Breakdown Voltage | BVdss | 620 | | | V | | 5 |
| Static drain to source on resistance | Rdson | | 4.4 | | Ώ | | 5 |
| VDD Supply Voltage | VDD | 8 | | 25 | V | | 2 |
| Drain Voltage (off state), maximum given as Bvdss | Drain | -0.3 | | | V | | 2 |
| VDD Voltage | VDD | -0.3 | | 28 | V | | 2 |
| INV Input Voltage | INV | -0.3 | | 7 | V | | 2 |
| CS Input Voltage | CS | -0.3 | | 7 | V | | 2 |
| Min/Max Operating Junction Temperature | TJ | -40 | | 150 | ℃ | | 2 |
| Operating Ambient Temperature | TA | -40 | | 85 | ℃ | | 2 |
| Min/Max Storage Temperature | Tstg | -55 | | 150 | ℃ | | 2 |
| Lead Temperature (Soldering) | | | | 260 | ℃ | Soldering, 10secs | 2 |
| Package thermal resistance, junction to ambient (DIP8) | RθJA | | 75 | | ℃/W | DIP8 | 2 |
## CAD (KiCad official)
- Symbol: `OB2530PAP`
- Footprint: `Package_DIP:DIP-8_W7.62mm`
- 3D model: DIP-8 (KiCad packages3D, STEP)
- 3D model files: `ob2530pap-etched.step` / `ob2530pap-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ob2530pap.step` / `ob2530pap.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [OB On Bright Elec datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588918409857798144) (10 pp, sha256 `57dd3d6d34929216`, retrieved 2026-10-16, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/ob2530pap-datasheet.pdf)