main
Ray
ob2500ncpa: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero
1d6221f
OB2500NCPA
OB On Bright Elec · AC-DC Controllers and Regulators · SOP-7
OB2500NCPA from OB On Bright Elec, in a SOP-7. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD | power_in | Chip power supply. Recommended operating range 8 V to 25 V; UVLO_ON ≈ 7.0 V, UVLO_OFF ≈ 18.2 V, VDD OVP ≈ 27 V. Typically fed from a transformer auxiliary winding via a rectifier and hold-up capacitor after start-up. |
| 2 | FB | input | Voltage feedback input from the auxiliary winding. Connected to a resistor divider that reflects the output voltage; the sample is compared against Vref = 2.500 V for CV regulation and used for programmable cable-drop compensation and CC-mode shutdown (< 1.55 V for 1024-2048 cycles). |
| 3 | RT | input | External over-temperature sense input. Connect an NTC thermistor from RT to GND; an internal ~72 µA source current develops a voltage, and OTP triggers when V(RT) falls below ~1.0 V. |
| 4 | CS | input | Current-sense input tied to the internal power MOSFET source. Connect an external sense resistor Rs from CS to GND to program the peak switch current and CC set-point; OCP threshold ranges from 500 mV (min) up to 590 mV (max) with on-time slope compensation. Includes an internal 300 ns leading-edge blanking. |
| 5 | Drain | output | Drain of the integrated 650 V / 1 A power MOSFET (Rds(on) ≈ 9 Ω). Connected to the transformer primary winding. Pins 5 and 6 are both tied to the same internal drain node and should be paralleled on the PCB for thermal dissipation. |
| 6 | Drain | output | Second bond to the drain of the integrated 650 V / 1 A power MOSFET. Tied internally to pin 5; both must be connected to the primary winding node and used together for current handling and heat sinking. |
| 7 | GND | power_in | Device ground reference and MOSFET source-return / control-ground. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | OB On Bright Elec |
| Package | SOP-7 |
| Category | PMIC |
| Pins | 7 |
Ordering variants
OB2500NCPA
CAD (KiCad official)
- Symbol:
OB2500NCPA - Footprint:
Package_SO:SOIC-8-N7_3.9x4.9mm_P1.27mm - 3D model: SOP-7 (KiCad packages3D, STEP)
- 3D model files:
ob2500ncpa-etched.step/ob2500ncpa-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ob2500ncpa.step/ob2500ncpa.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: OB On Bright Elec datasheet (None pp, sha256
176ddb19154735fc, retrieved 2026-08-17, tier: lcsc) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# OB2500NCPA
**OB On Bright Elec** · AC-DC Controllers and Regulators · SOP-7
OB2500NCPA from OB On Bright Elec, in a SOP-7. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD | power_in | Chip power supply. Recommended operating range 8 V to 25 V; UVLO_ON ≈ 7.0 V, UVLO_OFF ≈ 18.2 V, VDD OVP ≈ 27 V. Typically fed from a transformer auxiliary winding via a rectifier and hold-up capacitor after start-up. |
| 2 | FB | input | Voltage feedback input from the auxiliary winding. Connected to a resistor divider that reflects the output voltage; the sample is compared against Vref = 2.500 V for CV regulation and used for programmable cable-drop compensation and CC-mode shutdown (< 1.55 V for 1024-2048 cycles). |
| 3 | RT | input | External over-temperature sense input. Connect an NTC thermistor from RT to GND; an internal ~72 µA source current develops a voltage, and OTP triggers when V(RT) falls below ~1.0 V. |
| 4 | CS | input | Current-sense input tied to the internal power MOSFET source. Connect an external sense resistor Rs from CS to GND to program the peak switch current and CC set-point; OCP threshold ranges from 500 mV (min) up to 590 mV (max) with on-time slope compensation. Includes an internal 300 ns leading-edge blanking. |
| 5 | Drain | output | Drain of the integrated 650 V / 1 A power MOSFET (Rds(on) ≈ 9 Ω). Connected to the transformer primary winding. Pins 5 and 6 are both tied to the same internal drain node and should be paralleled on the PCB for thermal dissipation. |
| 6 | Drain | output | Second bond to the drain of the integrated 650 V / 1 A power MOSFET. Tied internally to pin 5; both must be connected to the primary winding node and used together for current handling and heat sinking. |
| 7 | GND | power_in | Device ground reference and MOSFET source-return / control-ground. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | OB On Bright Elec |
| Package | SOP-7 |
| Category | PMIC |
| Pins | 7 |
## Ordering variants
- `OB2500NCPA`
## CAD (KiCad official)
- Symbol: `OB2500NCPA`
- Footprint: `Package_SO:SOIC-8-N7_3.9x4.9mm_P1.27mm`
- 3D model: SOP-7 (KiCad packages3D, STEP)
- 3D model files: `ob2500ncpa-etched.step` / `ob2500ncpa-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ob2500ncpa.step` / `ob2500ncpa.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [OB On Bright Elec datasheet](docs/ob2500ncpa-datasheet.pdf) (None pp, sha256 `176ddb19154735fc`, retrieved 2026-08-17, tier: lcsc)
- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/ob2500ncpa-datasheet.pdf)