main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs ob2362dmp: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers ob2362dmp: viewers · Ray
ob2362dmp-etched.fit.json ob2362dmp: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
ob2362dmp-etched.glb ob2362dmp: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
ob2362dmp-etched.step ob2362dmp: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
ob2362dmp.glb Publish 0.1.0 · Ray
ob2362dmp.kicad_mod Publish 0.1.0 · Ray
ob2362dmp.kicad_sym Publish 0.1.0 · Ray
ob2362dmp.lbr Publish 0.1.0 · Ray
ob2362dmp.step Publish 0.1.0 · Ray
package.json Publish 0.1.0 · Ray
page.json ob2362dmp: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
README.md ob2362dmp: laser-etched CAD + chip hero (factory 2.0.0 backfill) · Ray

OB2362DMP

OB On Bright Elec · AC-DC Controllers and Regulators · SOT-23-6

OB2362DMP from OB On Bright Elec, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 GND power_in Device ground reference for all internal circuitry and the totem-pole gate driver return.
2 FB input Feedback input pin. The PWM duty cycle is determined by the voltage level into this pin and the current-sense signal at pin CS. VFB open-loop voltage ~5.1 V; input impedance ~30 kΩ; peak-load threshold VTH_PK ~4.4 V.
3 PRT input Multi-function protection pin. Connect an NTC resistor to ground for OTP detection. A resistor from Vaux to PRT adjusts OVP trigger voltage and detects transformer core demagnetization (valley detection). If both OTP and OVP are required, place a diode between PRT and the NTC resistor. Absolute max -0.3 to 7 V.
4 CS input Current-sense input from the MOSFET source sense resistor. Sets cycle-by-cycle peak current limit (VTH_OC ≈ 0.45 V, clamp ≈ 0.6 V). 300 ns leading-edge blanking; 90 ns OC-to-gate turn-off delay. Absolute max -0.3 to 7 V.
5 VCC power_in Chip power supply. Recommended operating range 12 to 26 V; UVLO(ON) ≈ 7.5 V, UVLO(OFF)/recovery ≈ 17 V, OVP latch threshold ≈ 28 V. Startup current ~2 µA, operating current ~2.5 mA, burst current ~0.6 mA.
6 GATE output Totem-pole gate driver output for the external power MOSFET. Includes soft-start/soft-driver to reduce MOSFET Vds stress at power-on.

Key specifications

Parameter Value
Manufacturer OB On Bright Elec
Package SOT-23-6
Category PMIC
Pins 6

Ordering variants

Same part, different packaging or reel option.

  • OB2362DMP

CAD (KiCad official)

  • Symbol: OB2362DMP
  • Footprint: Package_TO_SOT_SMD:SOT-23-6
  • 3D model: SOT-23-6 (KiCad packages3D, STEP)
  • 3D model files: ob2362dmp-etched.step / ob2362dmp-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ob2362dmp.step / ob2362dmp.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: OB On Bright Elec datasheet (12 pp, sha256 b37752756213d01f, retrieved 2026-08-17, tier: lcsc)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF