main
Ray ob2203cpa: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) d9650ae
{
  "schema_version": 1,
  "type": "component",
  "slug": "ob2203cpa",
  "title": "OB2203CPA",
  "brief": "OB On Bright Elec AC-DC Controllers and Regulators, SOIC-8. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.",
  "version": "0.2.0",
  "license": "CC-BY-SA-4.0",
  "tags": [
    "component",
    "pmic",
    "ob2203cpa"
  ],
  "component": {
    "mpn": "OB2203CPA",
    "manufacturer": "OB On Bright Elec",
    "package": "SOIC-8",
    "pin_count": 8,
    "category": "PMIC",
    "subcategory": "AC-DC Controllers and Regulators",
    "datasheet": "https://datasheet.lcsc.com/datasheet/pdf/202d4ff964b84c80a892dcc559fedb59.pdf",
    "parts": {
      "symbol": "ob2203cpa.kicad_sym",
      "footprint": "ob2203cpa.kicad_mod",
      "model_3d": "ob2203cpa-etched.glb",
      "model_3d_plain": "ob2203cpa.glb",
      "model_3d_step": "ob2203cpa-etched.step",
      "model_3d_step_plain": "ob2203cpa.step",
      "lbr": "ob2203cpa.lbr"
    },
    "distributor_links": {},
    "pins": [
      {
        "number": "1",
        "name": "SS",
        "type": "bidirectional",
        "description": "Soft-start programming pin. Program the soft-start rate with a capacitor to ground; after soft-start, the pin voltage is clamped at ~2V (Vss_clamp ~5.8V). Also acts as an external latch trigger input: latch triggers when SS pin voltage exceeds ~3.8V (V_latch_trigger)."
      },
      {
        "number": "2",
        "name": "FB",
        "type": "bidirectional",
        "description": "Feedback input pin. PWM duty cycle is determined by the voltage level on this pin combined with the current-sense signal at pin 3 (CS). The FB voltage also selects the operating mode among quasi-resonant (QR), pulse frequency modulation (PFM), and burst mode (BM). Input impedance ~4 kOhm; FB open voltage ~5.3 V."
      },
      {
        "number": "3",
        "name": "CS",
        "type": "input",
        "description": "Current sense input from the source of the external power MOSFET (via a sense resistor). Internal Leading Edge Blanking ~350 ns. Cycle-by-cycle current limit thresholds: ~0.45 V at 0% duty, ~0.80 V at 60% duty."
      },
      {
        "number": "4",
        "name": "GND",
        "type": "power_in",
        "description": "Ground for internal circuitry. Common return for VCC, gate driver, and signal pins."
      },
      {
        "number": "5",
        "name": "GATE",
        "type": "output",
        "description": "Totem-pole gate drive output for the external power MOSFET. 1A peak sink/source capability. Output clamp voltage ~16.5 V (at VCC=20 V). Typical rise/fall times 50 ns / 20 ns with 1 nF load."
      },
      {
        "number": "6",
        "name": "VCC",
        "type": "power_in",
        "description": "Chip DC power supply pin. Recommended operating range 12-23 V. UVLO(ON) startup at ~15 V, UVLO(OFF) at ~8.5 V; OVP triggers at ~31 V; internal Zener clamp at ~32 V (max 10 mA)."
      },
      {
        "number": "7",
        "name": "PFCVCC",
        "type": "power_out",
        "description": "PFC controller supply switch output. Connects to VCC via an internal low-impedance P-MOS switch (Rdson ~20 Ohm). During standby/startup the switch is open and PFCVCC is shut down; once the auxiliary winding is stable, PFCVCC is connected to VCC to power an external PFC controller. Shuts down on fault or at no/light load."
      },
      {
        "number": "8",
        "name": "DEM",
        "type": "input",
        "description": "Input from the transformer auxiliary winding for demagnetization (valley) detection timing. Also used for load over-voltage protection (OVP): OVP trigger point ~3.75 V, sampled ~2 us after switch-off, requires 4 consecutive cycles for true OVP. Internally clamped -0.7 V to +5.8 V."
      }
    ],
    "provenance": {
      "extractor": "ds2sf",
      "datasheet": {
        "url": "https://datasheet.lcsc.com/datasheet/pdf/202d4ff964b84c80a892dcc559fedb59.pdf",
        "pages": 13,
        "sha256": "25d415ee55f38346",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 8,
        "described": 8,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "ob2203cpa.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6,
          4.9,
          1.75
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "ob2203cpa-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6,
          4.9,
          1.75
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "c4a84ec66e418b2fce6a7e9f0408c1961a18f4ece5ddd620e2bdc76a19ea6886",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  },
  "metadata": {
    "specs": {
      "Manufacturer": "OB On Bright Elec",
      "Package": "SOIC-8",
      "Category": "PMIC",
      "Pins": "8"
    }
  },
  "sections": [
    "hero",
    "viewers",
    "readme",
    "breadcrumbs",
    "info"
  ],
  "discovery_triggers": [
    "ob2203cpa"
  ],
  "discovery_pitch": "OB2203CPA (OB On Bright Elec) component page with datasheet-verified CAD.",
  "author": {
    "name": "Ray"
  },
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "ob2203cpa.kicad_sym",
    "ob2203cpa.kicad_mod",
    "ob2203cpa.glb",
    "ob2203cpa.step",
    "ob2203cpa-etched.step",
    "ob2203cpa.lbr",
    "docs/hero.png",
    "docs/ob2203cpa-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html"
  ],
  "visibility": {
    "public": true
  },
  "variants": [
    {
      "mpn": "OB2203CPA",
      "kind": "packaging"
    },
    {
      "mpn": "OB2203CPAAP",
      "kind": "packaging"
    }
  ],
  "updated_at": "2026-09-25T03:24:12.152Z"
}