component
NXS0108PW-Q100J
Public Made by Adomby adom
Nexperia Translators, Level Shifters, TSSOP-20. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
NXS0108PW-Q100J
Nexperia · Translators, Level Shifters · TSSOP-20
NXS0108PW-Q100J from Nexperia, in a TSSOP-20. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | A1 | bidirectional | Data input or output referenced to VCC(A); in power-down or 3-state mode the An pins are limited to 0 V to 3.6 V. |
| 2 | VCC(A) | power_in | Supply voltage A, specified from 1.2 V to 3.6 V, and must be less than or equal to VCC(B). |
| 3 | A2 | bidirectional | Data input or output referenced to VCC(A); in power-down or 3-state mode the An pins are limited to 0 V to 3.6 V. |
| 4 | A3 | bidirectional | Data input or output referenced to VCC(A); in power-down or 3-state mode the An pins are limited to 0 V to 3.6 V. |
| 5 | A4 | bidirectional | Data input or output referenced to VCC(A); in power-down or 3-state mode the An pins are limited to 0 V to 3.6 V. |
| 6 | A5 | bidirectional | Data input or output referenced to VCC(A); in power-down or 3-state mode the An pins are limited to 0 V to 3.6 V. |
| 7 | A6 | bidirectional | Data input or output referenced to VCC(A); in power-down or 3-state mode the An pins are limited to 0 V to 3.6 V. |
| 8 | A7 | bidirectional | Data input or output referenced to VCC(A); in power-down or 3-state mode the An pins are limited to 0 V to 3.6 V. |
| 9 | A8 | bidirectional | Data input or output referenced to VCC(A); in power-down or 3-state mode the An pins are limited to 0 V to 3.6 V. |
| 10 | OE | input | Output enable input, active HIGH and referenced to VCC(A); a LOW level places the outputs in high-impedance OFF-state, and OE is limited to 0 V to 5.5 V. |
| 11 | GND | power_in | Ground (0 V) reference for all voltages on the device. |
| 12 | B8 | bidirectional | Data input or output referenced to VCC(B); in power-down or 3-state mode the Bn pins are limited to 0 V to 5.5 V. |
| 13 | B7 | bidirectional | Data input or output referenced to VCC(B); in power-down or 3-state mode the Bn pins are limited to 0 V to 5.5 V. |
| 14 | B6 | bidirectional | Data input or output referenced to VCC(B); in power-down or 3-state mode the Bn pins are limited to 0 V to 5.5 V. |
| 15 | B5 | bidirectional | Data input or output referenced to VCC(B); in power-down or 3-state mode the Bn pins are limited to 0 V to 5.5 V. |
| 16 | B4 | bidirectional | Data input or output referenced to VCC(B); in power-down or 3-state mode the Bn pins are limited to 0 V to 5.5 V. |
| 17 | B3 | bidirectional | Data input or output referenced to VCC(B); in power-down or 3-state mode the Bn pins are limited to 0 V to 5.5 V. |
| 18 | B2 | bidirectional | Data input or output referenced to VCC(B); in power-down or 3-state mode the Bn pins are limited to 0 V to 5.5 V. |
| 19 | VCC(B) | power_in | Supply voltage B, specified from 1.65 V to 5.5 V, and must be greater than or equal to VCC(A). |
| 20 | B1 | bidirectional | Data input or output referenced to VCC(B); in power-down or 3-state mode the Bn pins are limited to 0 V to 5.5 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Nexperia |
| Package | TSSOP-20 |
| Category | Logic |
| Pins | 20 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VCC(A) supply voltage A | VCC(A) | -0.5 | 6.5 | V | 3 | ||
| VCC(B) supply voltage B | VCC(B) | -0.5 | 6.5 | V | 3 | ||
| OE input voltage | -0.5 | 6.5 | V | 3 | |||
| Input voltage An, Bn power-down or 3-state mode | VI | -0.5 | 6.5 | V | An, Bn; Power-down or 3-state mode [1] | 3 | |
| Input voltage An, Bn active mode | VI | -0.5 | V | An, Bn; Active mode [1] [2] [3] | 3 | ||
| Output voltage An, Bn power-down or 3-state mode | VO | -0.5 | 6.5 | V | An, Bn; Power-down or 3-state mode [1] | 3 | |
| Output voltage An, Bn active mode | VO | -0.5 | V | An, Bn; Active mode [1] [3] [4] | 3 | ||
| Input clamping current | IIK | -50 | mA | VI < 0 V | 4 | ||
| Output clamping current | IOK | -50 | mA | VO < 0 V | 4 | ||
| Output current | IO | -50 | 50 | mA | VO = 0 V to VCCO [4] | 4 | |
| Supply current | ICC | 100 | mA | ICC(A) or ICC(B) | 4 | ||
| Ground current | IGND | -100 | mA | 4 | |||
| Storage temperature | Tstg | -65 | 150 | °C | 4 | ||
| Total power dissipation | Ptot | 500 | mW | Tamb = -40 °C to +125 °C | 4 | ||
| VCC(A) supply voltage A | VCC(A) | 1.2 | 3.6 | V | 4 | ||
| VCC(B) supply voltage B | VCC(B) | 1.65 | 5.5 | V | 4 | ||
| OE input voltage | 0 | 5.5 | V | 4 | |||
| Input voltage An power-down or 3-state mode | VI | 0 | 3.6 | V | Power-down or 3-state mode; An | 4 | |
| Input voltage Bn power-down or 3-state mode | VI | 0 | 5.5 | V | Power-down or 3-state mode; Bn | 4 | |
| Input voltage An, Bn active mode | VI | 0 | V | Active mode; An, Bn [3] | 4 | ||
| Output voltage An power-down or 3-state mode | VO | 0 | 3.6 | V | Power-down or 3-state mode; An | 4 | |
| Output voltage Bn power-down or 3-state mode | VO | 0 | 5.5 | V | Power-down or 3-state mode; Bn | 4 | |
| Output voltage An, Bn active mode | VO | 0 | V | Active mode; An, Bn [4] | 4 | ||
| Ambient temperature | Tamb | -40 | 125 | °C | 4 | ||
| Input transition rise and fall rate, A or B port | Δt/ΔV | 10 | ns/V | A or B port; push-pull driving; VCC(A) = 1.2 V to 3.6 V; VCC(B) = 1.65 V to 5.5 V | 4 | ||
| Input transition rise and fall rate, OE input | Δt/ΔV | 10 | ns/V | OE input; VCC(A) = 1.2 V to 3.6 V; VCC(B) = 1.65 V to 5.5 V | 4 | ||
| Input leakage current, OE input (25 °C) | II | -1 | 1 | µA | OE input; VI = 0 V to 3.6 V; VCC(A) = 1.2 V to 3.6 V; VCC(B) = 1.65 V to 5.5 V | 5 | |
| OFF-state output current, A or B port (25 °C) | IOZ | -1 | 1 | µA | A or B port; VO = 0 V or VCCO; VCC(A) = 1.2 V to 3.6 V; VCC(B) = 1.65 V to 5.5 V | 5 | |
| Power-off leakage current, A port (25 °C) | IOFF | -1 | 1 | µA | A port; VI or VO = 0 V to 3.6 V; VCC(A) = 0 V; VCC(B) = 0 V to 5.5 V | 5 | |
| Power-off leakage current, B port (25 °C) | IOFF | -1 | 1 | µA | B port; VI or VO = 0 V to 5.5 V; VCC(B) = 0 V; VCC(A) = 0 V to 3.6 V | 5 | |
| HIGH-level output voltage, A port (VCC(A) = 1.4 V) | VOH | 0.4 | V | A port; VI ≤ 0.15 V; VCC(B) = 1.65 V to 5.5 V; VCC(A) = 1.4 V; IO = -180 μA | 6 | ||
| HIGH-level output voltage, A port (VCC(A) = 1.65 V) | VOH | 0.4 | V | A port; VI ≤ 0.15 V; VCC(B) = 1.65 V to 5.5 V; VCC(A) = 1.65 V; IO = -220 μA | 6 | ||
| HIGH-level output voltage, A port (VCC(A) = 2.3 V) | VOH | 0.4 | V | A port; VI ≤ 0.15 V; VCC(B) = 1.65 V to 5.5 V; VCC(A) = 2.3 V; IO = -300 μA | 6 | ||
| HIGH-level output voltage, A port (VCC(A) = 3.0 V) | VOH | 0.55 | V | A port; VI ≤ 0.15 V; VCC(B) = 1.65 V to 5.5 V; VCC(A) = 3.0 V; IO = -400 μA | 6 | ||
| HIGH-level output voltage, B port (VCC(B) = 1.65 V) | VOH | 0.4 | V | B port; VI ≤ 0.15 V; VCC(A) = 1.2 V to 3.6 V; VCC(B) = 1.65 V; IO = -220 μA | 6 | ||
| HIGH-level output voltage, B port (VCC(B) = 2.3 V) | VOH | 0.4 | V | B port; VI ≤ 0.15 V; VCC(A) = 1.2 V to 3.6 V; VCC(B) = 2.3 V; IO = -300 μA | 6 | ||
| HIGH-level output voltage, B port (VCC(B) = 3.0 V) | VOH | 0.55 | V | B port; VI ≤ 0.15 V; VCC(A) = 1.2 V to 3.6 V; VCC(B) = 3.0 V; IO = -400 μA | 6 | ||
| Output voltage (VCC(B) = 4.5 V) | VOL | 0.55 | V | VCC(B) = 4.5 V; IO = -620 μA | 6 | ||
| LOW-level input voltage, A or B port | 0.15 | V | A or B port; VCC(A) = 1.2 V to 3.6 V; VCC(B) = 1.65 V to 5.5 V | 6 | |||
| Input leakage current, OE input (-40 °C to +125 °C) | II | -12 | 12 | µA | OE input; VI = 0 V to 3.6 V; VCC(A) = 1.2 V to 3.6 V; VCC(B) = 1.65 V to 5.5 V | 6 | |
| OFF-state output current, A or B port (-40 °C to +125 °C) | IOZ | -12 | 12 | µA | A or B port; VO = 0 V or VCCO; VCC(A) = 1.2 V to 3.6 V; VCC(B) = 1.65 V to 5.5 V | 6 | |
| Power-off leakage current, A port (-40 °C to +125 °C) | IOFF | -12 | 12 | µA | A port; VI or VO = 0 V to 3.6 V; VCC(A) = 0 V; VCC(B) = 0 V to 5.5 V | 6 | |
| Power-off leakage current, B port (-40 °C to +125 °C) | IOFF | -12 | 12 | µA | B port; VI or VO = 0 V to 3.6 V; VCC(B) = 0 V; VCC(A) = 0 V to 5.5 V | 6 | |
| Supply current ICC(A) (-40 °C to +125 °C) | ICC(A) | -5 | 1 | µA | OE = 0 V or VCC(A); An, Bn open; VCC(A) = 1.2 V; VCC(B) = 1.65 V to 5.5 V | 7 | |
| Supply current ICC(A) (-40 °C to +125 °C) | ICC(A) | -2 | 2 | µA | OE = 0 V or VCC(A); An, Bn open; VCC(A) = 1.5 V to 3.6 V; VCC(B) = 2.3 V to 5.5 V | 7 | |
| Supply current ICC(A) (-40 °C to +125 °C) | ICC(A) | 2 | µA | OE = 0 V or VCC(A); An, Bn open; VCC(A) = 3.6 V; VCC(B) = 0 V | 7 | ||
| Supply current ICC(A) (-40 °C to +125 °C) | ICC(A) | -1 | µA | OE = 0 V or VCC(A); An, Bn open; VCC(A) = 0 V; VCC(B) = 5.5 V | 7 | ||
| Supply current ICC(B) (-40 °C to +125 °C) | ICC(B) | 60 | µA | OE = 0 V or VCC(A); An, Bn open; VCC(A) = 1.2 V; VCC(B) = 1.65 V to 5.5 V | 7 | ||
| Supply current ICC(B) (-40 °C to +125 °C) | ICC(B) | 20 | µA | OE = 0 V or VCC(A); An, Bn open; VCC(A) = 1.5 V to 3.6 V; VCC(B) = 2.3 V to 5.5 V | 7 | ||
| Supply current ICC(B) (-40 °C to +125 °C) | ICC(B) | -1 | µA | OE = 0 V or VCC(A); An, Bn open; VCC(A) = 3.6 V; VCC(B) = 0 V | 7 | ||
| Supply current ICC(B) (-40 °C to +125 °C) | ICC(B) | 12 | µA | OE = 0 V or VCC(A); An, Bn open; VCC(A) = 0 V; VCC(B) = 5.5 V | 7 | ||
| Supply current ICC(A) + ICC(B) (-40 °C to +125 °C) | ICC(A) + ICC(B) | 65 | µA | OE = 0 V or VCC(A); An, Bn open; VCC(A) = 1.2 ; VCC(B) = 2.3 V to 5.5 V | 7 | ||
| ICC supply current (-40 °C to +125 °C) | ICC | 20 | µA | OE = 0 V or VCC(A); An, Bn open; VCC(A) = 1.5 V to 3.6 V; VCC(B) = 2.3 V to 5.5 V | 7 |
CAD (KiCad official)
- Symbol:
NXS0108PW-Q100J - Footprint:
Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm - 3D model: TSSOP-20 (KiCad packages3D, STEP)
- 3D model files:
nxs0108pw-q100j-etched.step/nxs0108pw-q100j-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);nxs0108pw-q100j.step/nxs0108pw-q100j.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Nexperia datasheet (25 pp, sha256
22ab4f5461f33b56, retrieved 2026-10-19, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# NXS0108PW-Q100J
**Nexperia** · Translators, Level Shifters · TSSOP-20
NXS0108PW-Q100J from Nexperia, in a TSSOP-20. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | A1 | bidirectional | Data input or output referenced to VCC(A); in power-down or 3-state mode the An pins are limited to 0 V to 3.6 V. |
| 2 | VCC(A) | power_in | Supply voltage A, specified from 1.2 V to 3.6 V, and must be less than or equal to VCC(B). |
| 3 | A2 | bidirectional | Data input or output referenced to VCC(A); in power-down or 3-state mode the An pins are limited to 0 V to 3.6 V. |
| 4 | A3 | bidirectional | Data input or output referenced to VCC(A); in power-down or 3-state mode the An pins are limited to 0 V to 3.6 V. |
| 5 | A4 | bidirectional | Data input or output referenced to VCC(A); in power-down or 3-state mode the An pins are limited to 0 V to 3.6 V. |
| 6 | A5 | bidirectional | Data input or output referenced to VCC(A); in power-down or 3-state mode the An pins are limited to 0 V to 3.6 V. |
| 7 | A6 | bidirectional | Data input or output referenced to VCC(A); in power-down or 3-state mode the An pins are limited to 0 V to 3.6 V. |
| 8 | A7 | bidirectional | Data input or output referenced to VCC(A); in power-down or 3-state mode the An pins are limited to 0 V to 3.6 V. |
| 9 | A8 | bidirectional | Data input or output referenced to VCC(A); in power-down or 3-state mode the An pins are limited to 0 V to 3.6 V. |
| 10 | OE | input | Output enable input, active HIGH and referenced to VCC(A); a LOW level places the outputs in high-impedance OFF-state, and OE is limited to 0 V to 5.5 V. |
| 11 | GND | power_in | Ground (0 V) reference for all voltages on the device. |
| 12 | B8 | bidirectional | Data input or output referenced to VCC(B); in power-down or 3-state mode the Bn pins are limited to 0 V to 5.5 V. |
| 13 | B7 | bidirectional | Data input or output referenced to VCC(B); in power-down or 3-state mode the Bn pins are limited to 0 V to 5.5 V. |
| 14 | B6 | bidirectional | Data input or output referenced to VCC(B); in power-down or 3-state mode the Bn pins are limited to 0 V to 5.5 V. |
| 15 | B5 | bidirectional | Data input or output referenced to VCC(B); in power-down or 3-state mode the Bn pins are limited to 0 V to 5.5 V. |
| 16 | B4 | bidirectional | Data input or output referenced to VCC(B); in power-down or 3-state mode the Bn pins are limited to 0 V to 5.5 V. |
| 17 | B3 | bidirectional | Data input or output referenced to VCC(B); in power-down or 3-state mode the Bn pins are limited to 0 V to 5.5 V. |
| 18 | B2 | bidirectional | Data input or output referenced to VCC(B); in power-down or 3-state mode the Bn pins are limited to 0 V to 5.5 V. |
| 19 | VCC(B) | power_in | Supply voltage B, specified from 1.65 V to 5.5 V, and must be greater than or equal to VCC(A). |
| 20 | B1 | bidirectional | Data input or output referenced to VCC(B); in power-down or 3-state mode the Bn pins are limited to 0 V to 5.5 V. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Nexperia |
| Package | TSSOP-20 |
| Category | Logic |
| Pins | 20 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VCC(A) supply voltage A | VCC(A) | -0.5 | | 6.5 | V | | 3 |
| VCC(B) supply voltage B | VCC(B) | -0.5 | | 6.5 | V | | 3 |
| OE input voltage | | -0.5 | | 6.5 | V | | 3 |
| Input voltage An, Bn power-down or 3-state mode | VI | -0.5 | | 6.5 | V | An, Bn; Power-down or 3-state mode [1] | 3 |
| Input voltage An, Bn active mode | VI | -0.5 | | | V | An, Bn; Active mode [1] [2] [3] | 3 |
| Output voltage An, Bn power-down or 3-state mode | VO | -0.5 | | 6.5 | V | An, Bn; Power-down or 3-state mode [1] | 3 |
| Output voltage An, Bn active mode | VO | -0.5 | | | V | An, Bn; Active mode [1] [3] [4] | 3 |
| Input clamping current | IIK | -50 | | | mA | VI < 0 V | 4 |
| Output clamping current | IOK | -50 | | | mA | VO < 0 V | 4 |
| Output current | IO | -50 | | 50 | mA | VO = 0 V to VCCO [4] | 4 |
| Supply current | ICC | | | 100 | mA | ICC(A) or ICC(B) | 4 |
| Ground current | IGND | -100 | | | mA | | 4 |
| Storage temperature | Tstg | -65 | | 150 | °C | | 4 |
| Total power dissipation | Ptot | | | 500 | mW | Tamb = -40 °C to +125 °C | 4 |
| VCC(A) supply voltage A | VCC(A) | 1.2 | | 3.6 | V | | 4 |
| VCC(B) supply voltage B | VCC(B) | 1.65 | | 5.5 | V | | 4 |
| OE input voltage | | 0 | | 5.5 | V | | 4 |
| Input voltage An power-down or 3-state mode | VI | 0 | | 3.6 | V | Power-down or 3-state mode; An | 4 |
| Input voltage Bn power-down or 3-state mode | VI | 0 | | 5.5 | V | Power-down or 3-state mode; Bn | 4 |
| Input voltage An, Bn active mode | VI | 0 | | | V | Active mode; An, Bn [3] | 4 |
| Output voltage An power-down or 3-state mode | VO | 0 | | 3.6 | V | Power-down or 3-state mode; An | 4 |
| Output voltage Bn power-down or 3-state mode | VO | 0 | | 5.5 | V | Power-down or 3-state mode; Bn | 4 |
| Output voltage An, Bn active mode | VO | 0 | | | V | Active mode; An, Bn [4] | 4 |
| Ambient temperature | Tamb | -40 | | 125 | °C | | 4 |
| Input transition rise and fall rate, A or B port | Δt/ΔV | | | 10 | ns/V | A or B port; push-pull driving; VCC(A) = 1.2 V to 3.6 V; VCC(B) = 1.65 V to 5.5 V | 4 |
| Input transition rise and fall rate, OE input | Δt/ΔV | | | 10 | ns/V | OE input; VCC(A) = 1.2 V to 3.6 V; VCC(B) = 1.65 V to 5.5 V | 4 |
| Input leakage current, OE input (25 °C) | II | -1 | | 1 | µA | OE input; VI = 0 V to 3.6 V; VCC(A) = 1.2 V to 3.6 V; VCC(B) = 1.65 V to 5.5 V | 5 |
| OFF-state output current, A or B port (25 °C) | IOZ | -1 | | 1 | µA | A or B port; VO = 0 V or VCCO; VCC(A) = 1.2 V to 3.6 V; VCC(B) = 1.65 V to 5.5 V | 5 |
| Power-off leakage current, A port (25 °C) | IOFF | -1 | | 1 | µA | A port; VI or VO = 0 V to 3.6 V; VCC(A) = 0 V; VCC(B) = 0 V to 5.5 V | 5 |
| Power-off leakage current, B port (25 °C) | IOFF | -1 | | 1 | µA | B port; VI or VO = 0 V to 5.5 V; VCC(B) = 0 V; VCC(A) = 0 V to 3.6 V | 5 |
| HIGH-level output voltage, A port (VCC(A) = 1.4 V) | VOH | | | 0.4 | V | A port; VI ≤ 0.15 V; VCC(B) = 1.65 V to 5.5 V; VCC(A) = 1.4 V; IO = -180 μA | 6 |
| HIGH-level output voltage, A port (VCC(A) = 1.65 V) | VOH | | | 0.4 | V | A port; VI ≤ 0.15 V; VCC(B) = 1.65 V to 5.5 V; VCC(A) = 1.65 V; IO = -220 μA | 6 |
| HIGH-level output voltage, A port (VCC(A) = 2.3 V) | VOH | | | 0.4 | V | A port; VI ≤ 0.15 V; VCC(B) = 1.65 V to 5.5 V; VCC(A) = 2.3 V; IO = -300 μA | 6 |
| HIGH-level output voltage, A port (VCC(A) = 3.0 V) | VOH | | | 0.55 | V | A port; VI ≤ 0.15 V; VCC(B) = 1.65 V to 5.5 V; VCC(A) = 3.0 V; IO = -400 μA | 6 |
| HIGH-level output voltage, B port (VCC(B) = 1.65 V) | VOH | | | 0.4 | V | B port; VI ≤ 0.15 V; VCC(A) = 1.2 V to 3.6 V; VCC(B) = 1.65 V; IO = -220 μA | 6 |
| HIGH-level output voltage, B port (VCC(B) = 2.3 V) | VOH | | | 0.4 | V | B port; VI ≤ 0.15 V; VCC(A) = 1.2 V to 3.6 V; VCC(B) = 2.3 V; IO = -300 μA | 6 |
| HIGH-level output voltage, B port (VCC(B) = 3.0 V) | VOH | | | 0.55 | V | B port; VI ≤ 0.15 V; VCC(A) = 1.2 V to 3.6 V; VCC(B) = 3.0 V; IO = -400 μA | 6 |
| Output voltage (VCC(B) = 4.5 V) | VOL | | | 0.55 | V | VCC(B) = 4.5 V; IO = -620 μA | 6 |
| LOW-level input voltage, A or B port | | | | 0.15 | V | A or B port; VCC(A) = 1.2 V to 3.6 V; VCC(B) = 1.65 V to 5.5 V | 6 |
| Input leakage current, OE input (-40 °C to +125 °C) | II | -12 | | 12 | µA | OE input; VI = 0 V to 3.6 V; VCC(A) = 1.2 V to 3.6 V; VCC(B) = 1.65 V to 5.5 V | 6 |
| OFF-state output current, A or B port (-40 °C to +125 °C) | IOZ | -12 | | 12 | µA | A or B port; VO = 0 V or VCCO; VCC(A) = 1.2 V to 3.6 V; VCC(B) = 1.65 V to 5.5 V | 6 |
| Power-off leakage current, A port (-40 °C to +125 °C) | IOFF | -12 | | 12 | µA | A port; VI or VO = 0 V to 3.6 V; VCC(A) = 0 V; VCC(B) = 0 V to 5.5 V | 6 |
| Power-off leakage current, B port (-40 °C to +125 °C) | IOFF | -12 | | 12 | µA | B port; VI or VO = 0 V to 3.6 V; VCC(B) = 0 V; VCC(A) = 0 V to 5.5 V | 6 |
| Supply current ICC(A) (-40 °C to +125 °C) | ICC(A) | -5 | | 1 | µA | OE = 0 V or VCC(A); An, Bn open; VCC(A) = 1.2 V; VCC(B) = 1.65 V to 5.5 V | 7 |
| Supply current ICC(A) (-40 °C to +125 °C) | ICC(A) | -2 | | 2 | µA | OE = 0 V or VCC(A); An, Bn open; VCC(A) = 1.5 V to 3.6 V; VCC(B) = 2.3 V to 5.5 V | 7 |
| Supply current ICC(A) (-40 °C to +125 °C) | ICC(A) | | | 2 | µA | OE = 0 V or VCC(A); An, Bn open; VCC(A) = 3.6 V; VCC(B) = 0 V | 7 |
| Supply current ICC(A) (-40 °C to +125 °C) | ICC(A) | -1 | | | µA | OE = 0 V or VCC(A); An, Bn open; VCC(A) = 0 V; VCC(B) = 5.5 V | 7 |
| Supply current ICC(B) (-40 °C to +125 °C) | ICC(B) | | | 60 | µA | OE = 0 V or VCC(A); An, Bn open; VCC(A) = 1.2 V; VCC(B) = 1.65 V to 5.5 V | 7 |
| Supply current ICC(B) (-40 °C to +125 °C) | ICC(B) | | | 20 | µA | OE = 0 V or VCC(A); An, Bn open; VCC(A) = 1.5 V to 3.6 V; VCC(B) = 2.3 V to 5.5 V | 7 |
| Supply current ICC(B) (-40 °C to +125 °C) | ICC(B) | -1 | | | µA | OE = 0 V or VCC(A); An, Bn open; VCC(A) = 3.6 V; VCC(B) = 0 V | 7 |
| Supply current ICC(B) (-40 °C to +125 °C) | ICC(B) | | | 12 | µA | OE = 0 V or VCC(A); An, Bn open; VCC(A) = 0 V; VCC(B) = 5.5 V | 7 |
| Supply current ICC(A) + ICC(B) (-40 °C to +125 °C) | ICC(A) + ICC(B) | | | 65 | µA | OE = 0 V or VCC(A); An, Bn open; VCC(A) = 1.2 ; VCC(B) = 2.3 V to 5.5 V | 7 |
| ICC supply current (-40 °C to +125 °C) | ICC | | | 20 | µA | OE = 0 V or VCC(A); An, Bn open; VCC(A) = 1.5 V to 3.6 V; VCC(B) = 2.3 V to 5.5 V | 7 |
## CAD (KiCad official)
- Symbol: `NXS0108PW-Q100J`
- Footprint: `Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm`
- 3D model: TSSOP-20 (KiCad packages3D, STEP)
- 3D model files: `nxs0108pw-q100j-etched.step` / `nxs0108pw-q100j-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `nxs0108pw-q100j.step` / `nxs0108pw-q100j.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Nexperia datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8590905739827765248) (25 pp, sha256 `22ab4f5461f33b56`, retrieved 2026-10-19, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/nxs0108pw-q100j-datasheet.pdf)