component
NXS0108BQX
Public Made by Adomby adom
Nexperia Translators, Level Shifters, DHVQFN-20(2.5x4.5). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownNXS0108BQX
Nexperia · Translators, Level Shifters · DHVQFN-20(2.5x4.5)
NXS0108BQX from Nexperia, in a DHVQFN-20(2.5x4.5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | A1 | bidirectional | Data input or output referenced to VCC(A); in power-down or 3-state mode the pin may be held between 0 V and 3.6 V. |
| 2 | VCC(A) | power_in | Supply voltage A, 1.2 V to 3.6 V, which must be less than or equal to VCC(B). |
| 3 | A2 | bidirectional | Data input or output referenced to VCC(A); in power-down or 3-state mode the pin may be held between 0 V and 3.6 V. |
| 4 | A3 | bidirectional | Data input or output referenced to VCC(A); in power-down or 3-state mode the pin may be held between 0 V and 3.6 V. |
| 5 | A4 | bidirectional | Data input or output referenced to VCC(A); in power-down or 3-state mode the pin may be held between 0 V and 3.6 V. |
| 6 | A5 | bidirectional | Data input or output referenced to VCC(A); in power-down or 3-state mode the pin may be held between 0 V and 3.6 V. |
| 7 | A6 | bidirectional | Data input or output referenced to VCC(A); in power-down or 3-state mode the pin may be held between 0 V and 3.6 V. |
| 8 | A7 | bidirectional | Data input or output referenced to VCC(A); in power-down or 3-state mode the pin may be held between 0 V and 3.6 V. |
| 9 | A8 | bidirectional | Data input or output referenced to VCC(A); in power-down or 3-state mode the pin may be held between 0 V and 3.6 V. |
| 10 | OE | input | Output enable input, active HIGH and referenced to VCC(A); a LOW level forces the A and B outputs into the high-impedance OFF-state, with a range of 0 V to 5.5 V. |
| 11 | GND | power_in | Ground (0 V). |
| 12 | B8 | bidirectional | Data input or output referenced to VCC(B); in power-down or 3-state mode the pin may be held between 0 V and 5.5 V. |
| 13 | B7 | bidirectional | Data input or output referenced to VCC(B); in power-down or 3-state mode the pin may be held between 0 V and 5.5 V. |
| 14 | B6 | bidirectional | Data input or output referenced to VCC(B); in power-down or 3-state mode the pin may be held between 0 V and 5.5 V. |
| 15 | B5 | bidirectional | Data input or output referenced to VCC(B); in power-down or 3-state mode the pin may be held between 0 V and 5.5 V. |
| 16 | B4 | bidirectional | Data input or output referenced to VCC(B); in power-down or 3-state mode the pin may be held between 0 V and 5.5 V. |
| 17 | B3 | bidirectional | Data input or output referenced to VCC(B); in power-down or 3-state mode the pin may be held between 0 V and 5.5 V. |
| 18 | B2 | bidirectional | Data input or output referenced to VCC(B); in power-down or 3-state mode the pin may be held between 0 V and 5.5 V. |
| 19 | VCC(B) | power_in | Supply voltage B, 1.65 V to 5.5 V. |
| 20 | B1 | bidirectional | Data input or output referenced to VCC(B); in power-down or 3-state mode the pin may be held between 0 V and 5.5 V. |
| 21 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Nexperia |
| Package | DHVQFN-20(2.5x4.5) |
| Category | Logic |
| Pins | 21 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VCC(A) supply voltage A (absolute max) | VCC(A) | -0.5 | 6.5 | V | 3 | ||
| VCC(B) supply voltage B (absolute max) | VCC(B) | -0.5 | 6.5 | V | 3 | ||
| OE input voltage (absolute max) | VI | -0.5 | 6.5 | V | 3 | ||
| An, Bn input voltage (absolute max) | VI | -0.5 | 6.5 | V | Power-down or 3-state mode | 3 | |
| An, Bn input voltage (absolute max) | VI | -0.5 | V | Active mode; printed max VCCI + 0.5 V (expression, not numeric) | 3 | ||
| An, Bn output voltage (absolute max) | VO | -0.5 | 6.5 | V | An, Bn; Power-down or 3-state mode | 3 | |
| An, Bn output voltage (absolute max) | VO | -0.5 | V | An, Bn; Active mode; printed max VCCO + 0.5 V (expression, not numeric) | 3 | ||
| input clamping current | IIK | -50 | mA | VI < 0 V | 4 | ||
| output clamping current | IOK | -50 | mA | VO < 0 V | 4 | ||
| output current | IO | -50 | 50 | mA | VO = 0 V to VCCO | 4 | |
| supply current | ICC | 100 | mA | ICC(A) or ICC(B) | 4 | ||
| ground current | IGND | -100 | mA | 4 | |||
| storage temperature | Tstg | -65 | 150 | °C | 4 | ||
| total power dissipation | Ptot | 500 | mW | Tamb = -40 °C to +125 °C | 4 | ||
| VCC(A) supply voltage A (recommended) | VCC(A) | 1.2 | 3.6 | V | 4 | ||
| VCC(B) supply voltage B (recommended) | VCC(B) | 1.65 | 5.5 | V | 4 | ||
| OE input voltage (recommended) | VI | 0 | 5.5 | V | OE input | 4 | |
| An input voltage (recommended) | VI | 0 | 3.6 | V | Power-down or 3-state mode | 4 | |
| Bn input voltage (recommended) | VI | 0 | 5.5 | V | Power-down or 3-state mode | 4 | |
| An, Bn input voltage (recommended) | VI | 0 | V | Active mode; printed max VCCI [3] (not numeric) | 4 | ||
| An output voltage (recommended) | VO | 0 | 3.6 | V | An; Power-down or 3-state mode | 4 | |
| Bn output voltage (recommended) | VO | 0 | 5.5 | V | Bn; Power-down or 3-state mode | 4 | |
| An, Bn output voltage (recommended) | VO | 0 | V | Active mode; printed max VCCO [4] (not numeric) | 4 | ||
| ambient temperature | Tamb | -40 | 125 | °C | 4 | ||
| input transition rise and fall rate (A or B port) | Δt/ΔV | 10 | ns/V | A or B port; push-pull driving; VCC(A) = 1.2 V to 3.6 V; VCC(B) = 1.65 V to 5.5 V | 4 | ||
| input transition rise and fall rate (OE input) | Δt/ΔV | 10 | ns/V | OE input; VCC(A) = 1.2 V to 3.6 V; VCC(B) = 1.65 V to 5.5 V | 4 | ||
| LOW-level output voltage (A port) | VOL | 0.4 | V | A port; VI ≤ 0.15 V; VCC(B) = 1.65 V to 5.5 V; VCC(A) = 1.4 V; IO = -180 μA; Tamb -40 °C to +125 °C | 6 | ||
| LOW-level output voltage (A port) | VOL | 0.55 | V | A port; VI ≤ 0.15 V; VCC(B) = 1.65 V to 5.5 V; VCC(A) = 3.0 V; IO = -400 μA; Tamb -40 °C to +125 °C | 6 | ||
| LOW-level output voltage (B port) | VOL | 0.4 | V | B port; VI ≤ 0.15 V; VCC(A) = 1.2 V to 3.6 V; VCC(B) = 1.65 V; IO = -220 μA; Tamb -40 °C to +125 °C | 6 | ||
| LOW-level output voltage (B port) | VOL | 0.55 | V | B port; VI ≤ 0.15 V; VCC(A) = 1.2 V to 3.6 V; VCC(B) = 3.0 V; IO = -400 μA; Tamb -40 °C to +125 °C | 6 | ||
| LOW-level input voltage (A or B port) | 0.15 | V | VCC(A) = 1.2 V to 3.6 V; VCC(B) = 1.65 V to 5.5 V; Tamb -40 °C to +125 °C | 6 | |||
| input leakage current (OE) | II | -12 | 12 | μA | OE input; VI = 0 V to 3.6 V; VCC(A) = 1.2 V to 3.6 V; VCC(B) = 1.65 V to 5.5 V; Tamb -40 °C to +125 °C | 6 | |
| OFF-state output current | IOZ | -12 | 12 | μA | A or B port; VO = 0 V or VCCO; VCC(A) = 1.2 V to 3.6 V; VCC(B) = 1.65 V to 5.5 V; Tamb -40 °C to +125 °C | 6 | |
| power-off leakage current (A port) | IOFF | -12 | 12 | μA | A port; VI or VO = 0 V to 3.6 V; VCC(A) = 0 V; VCC(B) = 0 V to 5.5 V; Tamb -40 °C to +125 °C | 6 | |
| power-off leakage current (B port) | IOFF | -12 | 12 | μA | B port; VI or VO = 0 V to 3.6 V; VCC(B) = 0 V; VCC(A) = 0 V to 5.5 V; Tamb -40 °C to +125 °C | 6 | |
| supply current ICC(A) | ICC(A) | -5 | 1 | μA | OE = 0 V or VCC(A); An, Bn open; VCC(A) = 1.2 V; VCC(B) = 1.65 V to 5.5 V; Tamb -40 °C to +125 °C | 7 | |
| supply current ICC(A) | ICC(A) | -2 | 2 | μA | OE = 0 V or VCC(A); An, Bn open; VCC(A) = 1.5 V to 3.6 V; VCC(B) = 2.3 V to 5.5 V; Tamb -40 °C to +125 °C | 7 | |
| supply current ICC(A) | ICC(A) | 2 | μA | OE = 0 V or VCC(A); An, Bn open; VCC(A) = 3.6 V; VCC(B) = 0 V; Tamb -40 °C to +125 °C | 7 | ||
| supply current ICC(A) | ICC(A) | -1 | μA | OE = 0 V or VCC(A); An, Bn open; VCC(A) = 0 V; VCC(B) = 5.5 V; Tamb -40 °C to +125 °C | 7 | ||
| supply current ICC(B) | ICC(B) | 60 | μA | OE = 0 V or VCC(A); An, Bn open; VCC(A) = 1.2 V; VCC(B) = 1.65 V to 5.5 V; Tamb -40 °C to +125 °C | 7 | ||
| supply current ICC(B) | ICC(B) | 20 | μA | OE = 0 V or VCC(A); An, Bn open; VCC(A) = 1.5 V to 3.6 V; VCC(B) = 2.3 V to 5.5 V; Tamb -40 °C to +125 °C | 7 | ||
| supply current ICC(B) | ICC(B) | -1 | μA | OE = 0 V or VCC(A); An, Bn open; VCC(A) = 3.6 V; VCC(B) = 0 V; Tamb -40 °C to +125 °C | 7 | ||
| supply current ICC(B) | ICC(B) | 12 | μA | OE = 0 V or VCC(A); An, Bn open; VCC(A) = 0 V; VCC(B) = 5.5 V; Tamb -40 °C to +125 °C | 7 | ||
| supply current ICC(A) + ICC(B) | ICC(A) + ICC(B) | 65 | μA | OE = 0 V or VCC(A); An, Bn open; VCC(A) = 1.2 ; VCC(B) = 2.3 V to 5.5 V; Tamb -40 °C to +125 °C | 7 | ||
| supply current ICC(A) + ICC(B) | ICC(A) + ICC(B) | 20 | μA | OE = 0 V or VCC(A); An, Bn open; VCC(A) = 1.5 V to 3.6 V; VCC(B) = 2.3 V to 5.5 V; Tamb -40 °C to +125 °C | 7 | ||
| HIGH to LOW propagation delay A to B | tPHL | 13.8 | ns | VCC(A) = 1.5 V ± 0.1 V; VCC(B) = 1.8 V ± 0.15 V; Tamb = -40 °C to +125 °C | 12 | ||
| LOW to HIGH propagation delay A to B | tPLH | 15.8 | ns | VCC(A) = 1.5 V ± 0.1 V; VCC(B) = 1.8 V ± 0.15 V; Tamb = -40 °C to +125 °C | 12 | ||
| HIGH to LOW propagation delay B to A | tPHL | 15.9 | ns | VCC(A) = 1.5 V ± 0.1 V; VCC(B) = 1.8 V ± 0.15 V; Tamb = -40 °C to +125 °C | 12 | ||
| LOW to HIGH propagation delay B to A | tPLH | 13.1 | ns | VCC(A) = 1.5 V ± 0.1 V; VCC(B) = 1.8 V ± 0.15 V; Tamb = -40 °C to +125 °C | 12 | ||
| enable time OE to A; B | ten | 200 | ns | VCC(A) = 1.5 V ± 0.1 V; VCC(B) = 1.8 V ± 0.15 V; Tamb = -40 °C to +125 °C | 12 | ||
| enable time OE to A, no external load | ten | 18 | ns | VCC(A) = 1.5 V ± 0.1 V; VCC(B) = 1.8 V ± 0.15 V; Tamb = -40 °C to +125 °C | 12 | ||
| enable time OE to B, no external load | ten | 19 | ns | VCC(A) = 1.5 V ± 0.1 V; VCC(B) = 1.8 V ± 0.15 V; Tamb = -40 °C to +125 °C | 12 | ||
| disable time OE to A | tdis | 120 | ns | OE to A; see Fig. 5; VCC(A) = 1.5 V ± 0.1 V; VCC(B) = 1.8 V ± 0.15 V; Tamb = -40 °C to +125 °C | 12 | ||
| disable time OE to B | tdis | 170 | ns | OE to B; see Fig. 5; VCC(A) = 1.5 V ± 0.1 V; VCC(B) = 1.8 V ± 0.15 V; Tamb = -40 °C to +125 °C | 12 | ||
| LOW to HIGH output transition time A port | tTLH | 2.6 | 16.4 | ns | VCC(A) = 1.5 V ± 0.1 V; VCC(B) = 1.8 V ± 0.15 V; Tamb = -40 °C to +125 °C | 12 | |
| LOW to HIGH output transition time B port | tTLH | 2.9 | 16.1 | ns | VCC(A) = 1.5 V ± 0.1 V; VCC(B) = 1.8 V ± 0.15 V; Tamb = -40 °C to +125 °C | 12 |
CAD (KiCad official)
- Symbol:
NXS0108BQX - Footprint:
Package_DFN_QFN:DHVQFN-20-1EP_2.5x4.5mm_P0.5mm_EP1x3mm - 3D model: DHVQFN-20(2.5x4.5), generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 0.9 mm nominal VQFN height). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions are nominal, not the manufacturer's CAD (STEP)
- 3D model files:
nxs0108bqx-etched.step/nxs0108bqx-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);nxs0108bqx.step/nxs0108bqx.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Nexperia datasheet (25 pp, sha256
e49d89a20823942c, retrieved 2026-10-19, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).