main
Ray
nxs0104pwj: laser-etched CAD + chip hero (factory 2.0.0 backfill)
e5b4791
NXS0104PWJ
Nexperia · Translators, Level Shifters · TSSOP-14
NXS0104PWJ from Nexperia, in a TSSOP-14. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VCC(A) | power_in | Supply voltage A. Operating range 1.65 V to 3.6 V. Reference rail for A-port I/Os and OE input. Must satisfy VCC(A) <= VCC(B). |
| 2 | A1 | bidirectional | Data input/output referenced to VCC(A). Open-drain bidirectional translation channel 1 paired with B1. Push-pull data rate up to 24 Mbps. |
| 3 | A2 | bidirectional | Data input/output referenced to VCC(A). Open-drain bidirectional translation channel 2 paired with B2. |
| 4 | A3 | bidirectional | Data input/output referenced to VCC(A). Open-drain bidirectional translation channel 3 paired with B3. |
| 5 | A4 | bidirectional | Data input/output referenced to VCC(A). Open-drain bidirectional translation channel 4 paired with B4. |
| 6 | NC | unconnected | Not connected. Leave floating or tie to a stable potential. |
| 7 | GND | power_in | Ground reference (0 V) for both supply rails and all I/O signals. |
| 8 | OE | input | Output enable input, active HIGH, referenced to VCC(A). LOW places all A and B I/Os in high-impedance OFF-state; HIGH enables bidirectional translation. VIH >= 0.65VCC(A); VIL <= 0.35VCC(A). |
| 9 | NC | unconnected | Not connected. Leave floating or tie to a stable potential. |
| 10 | B4 | bidirectional | Data input/output referenced to VCC(B). Open-drain bidirectional translation channel 4 paired with A4. |
| 11 | B3 | bidirectional | Data input/output referenced to VCC(B). Open-drain bidirectional translation channel 3 paired with A3. |
| 12 | B2 | bidirectional | Data input/output referenced to VCC(B). Open-drain bidirectional translation channel 2 paired with A2. |
| 13 | B1 | bidirectional | Data input/output referenced to VCC(B). Open-drain bidirectional translation channel 1 paired with B1. |
| 14 | VCC(B) | power_in | Supply voltage B. Operating range 2.3 V to 5.5 V. Reference rail for B-port I/Os. Must be >= VCC(A). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Nexperia |
| Package | TSSOP-14 |
| Category | Logic |
| Pins | 14 |
Ordering variants
Same part, different packaging or reel option.
NXS0104PWJNXS0104PWJBQNXS0104PWJGU12NXS0104PWJUM
CAD (KiCad official)
- Symbol:
NXS0104PWJ - Footprint:
Package_SO:TSSOP-14_4.4x5mm_P0.65mm - 3D model: TSSOP-14 (KiCad packages3D, STEP)
- 3D model files:
nxs0104pwj-etched.step/nxs0104pwj-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);nxs0104pwj.step/nxs0104pwj.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Nexperia datasheet (23 pp, sha256
8d71a6eba3b54852, retrieved 2026-08-17, tier: lcsc) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# NXS0104PWJ
**Nexperia** · Translators, Level Shifters · TSSOP-14
NXS0104PWJ from Nexperia, in a TSSOP-14. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VCC(A) | power_in | Supply voltage A. Operating range 1.65 V to 3.6 V. Reference rail for A-port I/Os and OE input. Must satisfy VCC(A) <= VCC(B). |
| 2 | A1 | bidirectional | Data input/output referenced to VCC(A). Open-drain bidirectional translation channel 1 paired with B1. Push-pull data rate up to 24 Mbps. |
| 3 | A2 | bidirectional | Data input/output referenced to VCC(A). Open-drain bidirectional translation channel 2 paired with B2. |
| 4 | A3 | bidirectional | Data input/output referenced to VCC(A). Open-drain bidirectional translation channel 3 paired with B3. |
| 5 | A4 | bidirectional | Data input/output referenced to VCC(A). Open-drain bidirectional translation channel 4 paired with B4. |
| 6 | NC | unconnected | Not connected. Leave floating or tie to a stable potential. |
| 7 | GND | power_in | Ground reference (0 V) for both supply rails and all I/O signals. |
| 8 | OE | input | Output enable input, active HIGH, referenced to VCC(A). LOW places all A and B I/Os in high-impedance OFF-state; HIGH enables bidirectional translation. VIH >= 0.65*VCC(A); VIL <= 0.35*VCC(A). |
| 9 | NC | unconnected | Not connected. Leave floating or tie to a stable potential. |
| 10 | B4 | bidirectional | Data input/output referenced to VCC(B). Open-drain bidirectional translation channel 4 paired with A4. |
| 11 | B3 | bidirectional | Data input/output referenced to VCC(B). Open-drain bidirectional translation channel 3 paired with A3. |
| 12 | B2 | bidirectional | Data input/output referenced to VCC(B). Open-drain bidirectional translation channel 2 paired with A2. |
| 13 | B1 | bidirectional | Data input/output referenced to VCC(B). Open-drain bidirectional translation channel 1 paired with B1. |
| 14 | VCC(B) | power_in | Supply voltage B. Operating range 2.3 V to 5.5 V. Reference rail for B-port I/Os. Must be >= VCC(A). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Nexperia |
| Package | TSSOP-14 |
| Category | Logic |
| Pins | 14 |
## Ordering variants
Same part, different packaging or reel option.
- `NXS0104PWJ`
- `NXS0104PWJBQ`
- `NXS0104PWJGU12`
- `NXS0104PWJUM`
## CAD (KiCad official)
- Symbol: `NXS0104PWJ`
- Footprint: `Package_SO:TSSOP-14_4.4x5mm_P0.65mm`
- 3D model: TSSOP-14 (KiCad packages3D, STEP)
- 3D model files: `nxs0104pwj-etched.step` / `nxs0104pwj-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `nxs0104pwj.step` / `nxs0104pwj.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Nexperia datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588908273679912960) (23 pp, sha256 `8d71a6eba3b54852`, retrieved 2026-08-17, tier: lcsc)
- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/nxs0104pwj-datasheet.pdf)