component
NXS0104PW-Q100J
Public Made by Adomby adom
Nexperia Translators, Level Shifters, TSSOP-14. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownNXS0104PW-Q100J
Nexperia · Translators, Level Shifters · TSSOP-14
NXS0104PW-Q100J from Nexperia, in a TSSOP-14. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VCC(A) | power_in | Supply voltage A for the A-side ports and OE, which may be supplied from 1.65 V to 3.6 V and must be less than or equal to VCC(B). |
| 2 | A1 | bidirectional | Data input or output, referenced to VCC(A); the A port inputs accept up to 5.5 V and the A port is rated for 3-state or power-down voltages of -0.5 V to +4.6 V. |
| 3 | A2 | bidirectional | Data input or output, referenced to VCC(A); the A port is rated for 3-state or power-down voltages of -0.5 V to +4.6 V. |
| 4 | A3 | bidirectional | Data input or output, referenced to VCC(A); the A port is rated for 3-state or power-down voltages of -0.5 V to +4.6 V. |
| 5 | A4 | bidirectional | Data input or output, referenced to VCC(A); the A port is rated for 3-state or power-down voltages of -0.5 V to +4.6 V. |
| 6 | n.c. | unconnected | Not connected. |
| 7 | GND | power_in | Ground (0 V); when either VCC(A) or VCC(B) is at GND level the device enters power-down mode. |
| 8 | OE | input | Active-HIGH output enable input referenced to VCC(A); a LOW level forces the A and B outputs into the high-impedance OFF-state. |
| 9 | n.c. | unconnected | Not connected. |
| 10 | B4 | bidirectional | Data input or output, referenced to VCC(B); B port inputs accept up to 5.5 V and the B port is rated to -0.5 V to +6.5 V. |
| 11 | B3 | bidirectional | Data input or output, referenced to VCC(B); B port inputs accept up to 5.5 V and the B port is rated to -0.5 V to +6.5 V. |
| 12 | B2 | bidirectional | Data input or output, referenced to VCC(B); B port inputs accept up to 5.5 V and the B port is rated to -0.5 V to +6.5 V. |
| 13 | B1 | bidirectional | Data input or output, referenced to VCC(B); B port inputs accept up to 5.5 V and the B port is rated to -0.5 V to +6.5 V. |
| 14 | VCC(B) | power_in | Supply voltage B for the B-side ports, which may be supplied from 2.3 V to 5.5 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Nexperia |
| Package | TSSOP-14 |
| Category | Logic |
| Pins | 14 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VCC(A) supply voltage A | VCC(A) | -0.5 | 6.5 | V | 5 | ||
| VCC(B) supply voltage B | VCC(B) | -0.5 | 6.5 | V | 5 | ||
| input voltage, A port and OE input | VI | -0.5 | 6.5 | V | A port and OE input | 5 | |
| input voltage, B port | VI | -0.5 | 6.5 | V | B port | 5 | |
| input voltage, power-down or 3-state mode, A port | VI | -0.5 | 4.6 | V | Power-down or 3-state mode; A port | 5 | |
| output voltage, B port | VO | -0.5 | 6.5 | V | B port | 5 | |
| input clamping current | IIK | -50 | mA | VI < 0 V | 5 | ||
| output clamping current | IOK | -50 | mA | VO < 0 V | 5 | ||
| output current | IO | -50 | 50 | mA | VO = 0 V to VCCO; printed as ±50 mA | 5 | |
| supply current | ICC | 100 | mA | ICC(A) or ICC(B) | 5 | ||
| ground current | IGND | -100 | mA | 5 | |||
| storage temperature | Tstg | -65 | 150 | °C | 5 | ||
| total power dissipation | Ptot | 500 | mW | Tamb = -40 °C to +125 °C; SOT402-1 (TSSOP14) | 5 | ||
| supply voltage A | VCC(A) | 1.65 | 3.6 | V | 6 | ||
| supply voltage B | VCC(B) | 2.3 | 5.5 | V | 6 | ||
| ambient temperature | Tamb | -40 | 125 | °C | 6 | ||
| input transition rise and fall rate, A or B port | Δt/ΔV | 10 | ns/V | A or B port; push-pull driving; VCC(A) = 1.65 V to 3.6 V; VCC(B) = 2.3 V to 5.5 V | 6 | ||
| input transition rise and fall rate, OE input | Δt/ΔV | 10 | ns/V | OE input; VCC(A) = 1.65 V to 3.6 V; VCC(B) = 2.3 V to 5.5 V | 6 | ||
| input leakage current (Tamb 25 °C) | II | -1 | 1 | μA | OE input; VCC(A) = 1.65 V to 3.6 V; VCC(B) = 2.3 V to 5.5 V; printed ±1 | 6 | |
| OFF-state output current (Tamb 25 °C) | IOZ | -1 | 1 | μA | A or B port; OE = 0 V; VCC(A) = 1.65 V to 3.6 V; VCC(B) = 2.3 V to 5.5 V; printed ±1 | 6 | |
| power-off leakage current, A port (Tamb 25 °C) | IOFF | -1 | 1 | μA | A port; VCC(A) = 0 V; VCC(B) = 0 V to 5.5 V; printed ±1 | 6 | |
| power-off leakage current, B port (Tamb 25 °C) | IOFF | -1 | 1 | μA | B port; VCC(B) = 0 V; VCC(A) = 0 V to 3.6 V; printed ±1 | 6 | |
| LOW-level input voltage, A or B port (-40 °C to +85 °C) | VIL | 0 | 0.15 | V | -40 °C to +85 °C range; A or B port; VCC(A) = 1.65 V to 3.6 V; VCC(B) = 2.3 V to 5.5 V | 7 | |
| LOW-level input voltage, A or B port (-40 °C to +125 °C) | VIL | 0 | 0.15 | V | -40 °C to +125 °C range; A or B port; VCC(A) = 1.65 V to 3.6 V; VCC(B) = 2.3 V to 5.5 V | 7 | |
| LOW-level input voltage, OE input (-40 °C to +85 °C) | VIL | 0 | V | -40 °C to +85 °C range; OE input; VCC(A) = 1.65 V to 3.6 V; VCC(B) = 2.3 V to 5.5 V; printed max is 0.35VCC(A) | 7 | ||
| LOW-level input voltage, OE input (-40 °C to +125 °C) | VIL | 0 | V | -40 °C to +125 °C range; OE input; VCC(A) = 1.65 V to 3.6 V; VCC(B) = 2.3 V to 5.5 V; printed max is 0.35VCC(A) | 7 | ||
| LOW-level output voltage (-40 °C to +85 °C) | VOL | 0.4 | V | -40 °C to +85 °C range; A or B port; IO = 1 mA; VI ≤ 0.15 V; VCC(A) = 1.65 V to 3.6 V; VCC(B) = 2.3 V to 5.5 V | 7 | ||
| LOW-level output voltage (-40 °C to +125 °C) | VOL | 0.4 | V | -40 °C to +125 °C range; A or B port; IO = 1 mA; VI ≤ 0.15 V; VCC(A) = 1.65 V to 3.6 V; VCC(B) = 2.3 V to 5.5 V | 7 | ||
| input leakage current (-40 °C to +85 °C) | II | -2 | 2 | μA | -40 °C to +85 °C range; OE input; VCC(A) = 1.65 V to 3.6 V; VCC(B) = 2.3 V to 5.5 V; printed ±2 | 7 | |
| input leakage current (-40 °C to +125 °C) | II | -12 | 12 | μA | -40 °C to +125 °C range; OE input; VCC(A) = 1.65 V to 3.6 V; VCC(B) = 2.3 V to 5.5 V; printed ±12 | 7 | |
| OFF-state output current (-40 °C to +85 °C) | IOZ | -2 | 2 | μA | -40 °C to +85 °C range; A or B port; VCC(A) = 1.65 V to 3.6 V; VCC(B) = 2.3 V to 5.5 V; printed ±2 | 7 | |
| OFF-state output current (-40 °C to +125 °C) | IOZ | -12 | 12 | μA | -40 °C to +125 °C range; A or B port; VCC(A) = 1.65 V to 3.6 V; VCC(B) = 2.3 V to 5.5 V; printed ±12 | 7 | |
| power-off leakage current, A port (-40 °C to +85 °C) | IOFF | -2 | 2 | μA | -40 °C to +85 °C range; A port; VCC(A) = 0 V; VCC(B) = 0 V to 5.5 V; printed ±2 | 7 | |
| power-off leakage current, A port (-40 °C to +125 °C) | IOFF | -12 | 12 | μA | -40 °C to +125 °C range; A port; VCC(A) = 0 V; VCC(B) = 0 V to 5.5 V; printed ±12 | 7 | |
| power-off leakage current, B port (-40 °C to +85 °C) | IOFF | -2 | 2 | μA | -40 °C to +85 °C range; B port; VCC(B) = 0 V; VCC(A) = 0 V to 3.6 V; printed ±2 | 7 | |
| power-off leakage current, B port (-40 °C to +125 °C) | IOFF | -12 | 12 | μA | -40 °C to +125 °C range; B port; VCC(B) = 0 V; VCC(A) = 0 V to 3.6 V; printed ±12 | 7 | |
| ICC(A) supply current (-40 °C to +85 °C) | ICC(A) | 2.4 | μA | -40 °C to +85 °C range; OE = 0 V or VCC(A); An, Bn open; VCC(A) = 1.65 V to 3.6 V; VCC(B) = 2.3 V to 5.5 V | 8 | ||
| ICC(A) supply current (-40 °C to +125 °C) | ICC(A) | 15 | μA | -40 °C to +125 °C range; OE = 0 V or VCC(A); An, Bn open; VCC(A) = 1.65 V to 3.6 V; VCC(B) = 2.3 V to 5.5 V | 8 | ||
| ICC(A) supply current (-40 °C to +85 °C) | ICC(A) | 2.2 | μA | -40 °C to +85 °C range; OE = 0 V or VCC(A); An, Bn open; VCC(A) = 3.6 V; VCC(B) = 0 V | 8 | ||
| ICC(A) supply current (-40 °C to +85 °C) | ICC(A) | -1 | μA | -40 °C to +85 °C range; OE = 0 V or VCC(A); An, Bn open; VCC(A) = 0 V; VCC(B) = 5.5 V | 8 | ||
| ICC(A) supply current (-40 °C to +125 °C) | ICC(A) | -8 | μA | -40 °C to +125 °C range; OE = 0 V or VCC(A); An, Bn open; VCC(A) = 0 V; VCC(B) = 5.5 V | 8 | ||
| ICC(B) supply current (-40 °C to +85 °C) | ICC(B) | 12 | μA | -40 °C to +85 °C range; OE = 0 V or VCC(A); An, Bn open; VCC(A) = 1.65 V to 3.6 V; VCC(B) = 2.3 V to 5.5 V | 8 | ||
| ICC(B) supply current (-40 °C to +125 °C) | ICC(B) | 30 | μA | -40 °C to +125 °C range; OE = 0 V or VCC(A); An, Bn open; VCC(A) = 1.65 V to 3.6 V; VCC(B) = 2.3 V to 5.5 V | 8 | ||
| ICC(B) supply current (-40 °C to +85 °C) | ICC(B) | -1 | μA | -40 °C to +85 °C range; OE = 0 V or VCC(A); An, Bn open; VCC(A) = 3.6 V; VCC(B) = 0 V | 8 | ||
| ICC(B) supply current (-40 °C to +125 °C) | ICC(B) | -5 | μA | -40 °C to +125 °C range; OE = 0 V or VCC(A); An, Bn open; VCC(A) = 3.6 V; VCC(B) = 0 V | 8 | ||
| ICC(B) supply current (-40 °C to +85 °C) | ICC(B) | 1 | μA | -40 °C to +85 °C range; OE = 0 V or VCC(A); An, Bn open; VCC(A) = 0 V; VCC(B) = 5.5 V | 8 | ||
| ICC(B) supply current (-40 °C to +125 °C) | ICC(B) | 6 | μA | -40 °C to +125 °C range; OE = 0 V or VCC(A); An, Bn open; VCC(A) = 0 V; VCC(B) = 5.5 V | 8 | ||
| ICC(A) + ICC(B) supply current (-40 °C to +85 °C) | ICC | 14.4 | μA | -40 °C to +85 °C range; OE = 0 V or VCC(A); An, Bn open; VCC(A) = 1.65 V to 3.6 V; VCC(B) = 2.3 V to 5.5 V | 8 | ||
| ICC(A) + ICC(B) supply current (-40 °C to +125 °C) | ICC | 45 | μA | -40 °C to +125 °C range; OE = 0 V or VCC(A); An, Bn open; VCC(A) = 1.65 V to 3.6 V; VCC(B) = 2.3 V to 5.5 V | 8 |
CAD (KiCad official)
- Symbol:
NXS0104PW-Q100J - Footprint:
Package_SO:TSSOP-14_4.4x5mm_P0.65mm - 3D model: TSSOP-14 (KiCad packages3D, STEP)
- 3D model files:
nxs0104pw-q100j-etched.step/nxs0104pw-q100j-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);nxs0104pw-q100j.step/nxs0104pw-q100j.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Nexperia datasheet (21 pp, sha256
d6f4c62dfa9afa0b, retrieved 2026-10-18, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).