Generated by kicad-footprint-generator · KiCad file format 20260206
NVT211CMTR2G
onsemi · Temperature Sensors · WDFN-8(2x2)
NVT211CMTR2G from onsemi, in a WDFN-8(2x2). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD | power_in | Positive supply, specified at 2.8 V to 3.6 V. |
| 2 | D+ | passive | Positive connection to the remote temperature sensor diode; route with D− as a close, parallel, guarded pair, keeping total capacitance at D+ and D− to a maximum of 1,000 pF. |
| 3 | D− | passive | Negative connection to the remote temperature sensor diode; route with D+ as a close, parallel, guarded pair, keeping total capacitance at D+ and D− to a maximum of 1,000 pF. |
| 4 | THERM | output | Open-drain overtemperature output that can be used as an overtemperature shutdown pin and requires a pullup resistor; absolute input current limit is −1 to +50 mA. |
| 5 | GND | power_in | Supply ground connection. |
| 6 | ALERT/THERM2 | output | Open-drain logic output used as interrupt or SMBus ALERT, which can also be configured as a second THERM output; requires a pullup resistor to VDD. |
| 7 | SDATA | bidirectional | SMBus/I2C serial data logic input/output, open-drain, requires a pullup resistor; absolute range −0.3 V to +3.6 V. |
| 8 | SCLK | input | SMBus/I2C serial clock logic input, requires a pullup resistor; absolute range −0.3 V to +3.6 V. |
| 9 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | onsemi |
| Package | WDFN-8(2x2) |
| Category | Sensors |
| Pins | 9 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Positive Supply Voltage (VDD) to GND | VDD | -0.3 | 3.6 | V | 2 | ||
| D+ pin voltage | -0.3 | V | 2 | ||||
| D− to GND | -0.3 | 0.6 | V | 2 | |||
| SCLK, SDATA, ALERT, THERM voltage | -0.3 | 3.6 | V | 2 | |||
| Input Current, SDATA, THERM | -1 | 50 | mA | 2 | |||
| Input Current, D− | -1 | 1 | mA | 2 | |||
| ESD Rating, All Pins (Human Body Model) | 1500 | V | Human Body Model | 2 | |||
| Maximum Junction Temperature | TJ MAX | 150 | °C | 2 | |||
| Storage Temperature Range | -65 | 150 | °C | 2 | |||
| Supply Voltage | VDD | 2.8 | 3.3 | 3.6 | V | 4 | |
| Average Operating Supply Current | IDD | 240 | 350 | µA | 0.0625 Conversions/Sec Rate (Note 1, 2) | 4 | |
| Standby Mode Supply Current | IDD | 5 | 30 | µA | Standby Mode | 4 | |
| Power-on Reset Threshold | 1 | 2.56 | V | 4 | |||
| Local Sensor Accuracy | -1 | 1 | °C | 3.0 V to 3.6 V, 0°C ≤ TA ≤ +70°C | 4 | ||
| Local Sensor Accuracy | -1.5 | 1.5 | °C | 3.0 V to 3.6 V, 0°C ≤ TA ≤ +85°C | 4 | ||
| Local Sensor Accuracy | -2.5 | 2.5 | °C | 2.8 V to 3.6 V, −20°C ≤ TA ≤ +110°C | 4 | ||
| Remote Diode Sensor Accuracy | -1 | 1 | °C | 3.0 V to 3.6 V, 0°C ≤ TA ≤ +70°C, −55°C ≤ TD (Note 3) ≤ +150°C | 4 | ||
| Remote Diode Sensor Accuracy | -1.5 | 1.5 | °C | 3.0 V to 3.6 V, 0°C ≤ TA ≤ +85°C, −55°C ≤ TD (Note 3) ≤ +150°C | 4 | ||
| Remote Diode Sensor Accuracy | -2.5 | 2.5 | °C | 3.0 V to 3.6 V, −40°C ≤ TA ≤ +100°C, −55°C ≤ TD (Note 3) ≤ +150°C | 4 | ||
| Remote Diode Sensor Accuracy | -2.25 | 2.25 | °C | 2.8 V to 3.6 V, −20°C ≤ TA ≤ +110°C, TD = +40°C | 4 | ||
| Conversion Time, One-shot Mode with Averaging Switched On | 40 | 52 | ms | From Stop Bit to Conversion Complete | 4 | ||
| Conversion Time, One-shot Mode with Averaging Off | 6 | 8 | ms | Conversion Rate = 16-, 32-, or 64-conversions per Second | 4 | ||
| Output Low Voltage | VOL | 0.4 | V | IOUT = −6.0 mA | 4 | ||
| High Level Output Leakage Current | IOH | 1 | µA | VOUT = VDD − 0.1 | 4 | ||
| Logic Input High Voltage | VIH | 1.4 | V | SCLK, SDATA | 4 | ||
| Logic Input Low Voltage | VIL | 0.8 | V | SCLK, SDATA | 4 | ||
| SDA Output Low Voltage | VOL | 0.4 | mA | 4 | |||
| Logic Input Current | IIH, IIL | -1 | 1 | µA | 4 | ||
| SMBus/I2C Clock Frequency | 400 | kHz | 4 | ||||
| SMBus/I2C Timeout | 25 | 64 | ms | User Programmable (Note 6) | 4 | ||
| SCLK Falling Edge to SDATA Valid Time | 1 | µs | Master Clocking in Data | 4 | |||
| Clock Frequency (fSCLK) | fSCLK | 400 | kHz | Limit at TMIN and TMAX (Note 1) | 3 | ||
| Clock Low Period | tLOW | 1.3 | µs | Between 10% Points (Note 1) | 3 | ||
| Clock High Period | tHIGH | 0.6 | µs | Between 90% Points (Note 1) | 3 | ||
| Clock/Data Rise Time | tR | 300 | ns | (Note 1) | 3 | ||
| Clock/Data Fall Time | tF | 300 | ns | (Note 1) | 3 | ||
| Start Condition Setup Time | tSU; STA | 600 | ns | (Note 1) | 3 | ||
| Start Condition Hold Time | tHD; STA | 600 | ns | (Note 1, 2) | 3 | ||
| Data Setup Time | tSU; DAT | 100 | ns | (Note 1, 3) | 3 | ||
| Stop Condition Setup Time | tSU; STO | 600 | ns | (Note 1, 4) | 3 | ||
| Bus Free Time between Stop and Start Conditions | tBUF | 1.3 | µs | (Note 1) | 3 | ||
| Junction-to-ambient thermal resistance, 8-lead DFN | θJA | 142 | °C/W | 17 | |||
| Operating ambient temperature range | TA | -40 | 120 | °C | 8 |
CAD (KiCad official)
- Symbol:
NVT211CMTR2G - Footprint:
Package_DFN_QFN:WDFN-8-1EP_2x2mm_P0.5mm_EP0.8x1.2mm - 3D model: WDFN-8(2x2), generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 0.75 mm nominal WSON height). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions are nominal, not the manufacturer's CAD (STEP)
- 3D model files:
nvt211cmtr2g-etched.step/nvt211cmtr2g-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);nvt211cmtr2g.step/nvt211cmtr2g.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: onsemi datasheet (20 pp, sha256
05b85dc067b755bc, retrieved 2026-10-31, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).