Made with KiCad 10.0 · needs KiCad 10.0 or later to open · KiCad file format 20260206
NV25320DTHFT3G
onsemi · EEPROM · TSSOP-8
NV25320DTHFT3G from onsemi, in a TSSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | CS | input | Active-low chip select input that enables the device; when high, SO is tri-stated and the device is in Standby Mode. |
| 2 | SO | output | Serial data output that shifts data out on the falling edge of SCK in SPI modes (0,0) and (1,1) and is tri-stated when CS is high or during hold. |
| 3 | WP | input | Active-low write protect input that disables Status Register writes when low and the WPEN bit is set to 1, and allows all writes when high. |
| 4 | VSS | power_in | Ground. |
| 5 | SI | input | Serial data input that accepts op-codes, addresses and data, latched on the rising edge of SCK. |
| 6 | SCK | input | Serial clock input from the host that synchronizes communication, up to 10 MHz. |
| 7 | HOLD | input | Active-low hold input that pauses serial transmission when taken low with SCK low, and should be tied to VCC when unused. |
| 8 | VCC | power_in | Power supply, 2.5 V to 5.5 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | onsemi |
| Package | TSSOP-8 |
| Category | Memory |
| Pins | 8 |
CAD (KiCad official)
- Symbol:
NV25320DTHFT3G - Footprint:
Package_SO:TSSOP-8_3x3mm_P0.65mm - 3D model: TSSOP-8 (KiCad packages3D, STEP)
- 3D model files:
nv25320dthft3g-etched.step/nv25320dthft3g-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);nv25320dthft3g.step/nv25320dthft3g.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: onsemi datasheet (14 pp, sha256
cd6edef779f64c11, retrieved 2026-10-23, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text+vision), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).