NUP4114UPXV6T1G

{
  "slug": "nup4114upxv6t1g",
  "version": "0.1.0",
  "type": "component",
  "description": "onsemi ESD And Surge Protection (TVS/ESD), SOT-563. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "circuit protection",
    "nup4114upxv6t1g",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "nup4114upxv6t1g.kicad_sym",
    "nup4114upxv6t1g.kicad_mod",
    "nup4114upxv6t1g.glb",
    "nup4114upxv6t1g.step",
    "nup4114upxv6t1g.lbr",
    "docs/hero.png",
    "docs/nup4114upxv6t1g-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "nup4114upxv6t1g-hero.glb",
    "nup4114upxv6t1g-hero.overlay.json",
    "nup4114upxv6t1g-etched.glb"
  ],
  "component": {
    "mpn": "NUP4114UPXV6T1G",
    "manufacturer": "onsemi",
    "package": "SOT-563",
    "pin_count": 6,
    "category": "Circuit Protection",
    "subcategory": "ESD And Surge Protection (TVS/ESD)",
    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8586202739822616576",
    "parts": {
      "symbol": "nup4114upxv6t1g.kicad_sym",
      "footprint": "nup4114upxv6t1g.kicad_mod",
      "model_3d": "nup4114upxv6t1g-hero.glb",
      "model_3d_plain": "nup4114upxv6t1g-etched.glb",
      "model_3d_step": "nup4114upxv6t1g-etched.step",
      "model_3d_step_plain": "nup4114upxv6t1g.step",
      "lbr": "nup4114upxv6t1g.lbr"
    },
    "distributor_links": {
      "lcsc": "C74675"
    },
    "distributor_check": {
      "checked_at": "2026-10-17T22:00:02Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": null,
        "status": "quota"
      },
      "mouser": {
        "pn": null,
        "status": "quota"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "I/O 1",
        "type": "passive",
        "description": "Data line protected by the steering diodes, which clamp transients to the VCC rail or to ground; the array protects up to four data lines."
      },
      {
        "number": "2",
        "name": "GND",
        "type": "power_in",
        "description": "Negative reference that must be connected directly to ground using a ground plane to minimize PCB ground inductance."
      },
      {
        "number": "3",
        "name": "I/O 2",
        "type": "passive",
        "description": "Data line protected by the steering diodes, which clamp transients to the VCC rail or to ground; the array protects up to four data lines."
      },
      {
        "number": "4",
        "name": "I/O 3",
        "type": "passive",
        "description": "Data line protected by the steering diodes, which clamp transients to the VCC rail or to ground; the array protects up to four data lines."
      },
      {
        "number": "5",
        "name": "VCC",
        "type": "power_in",
        "description": "Optional positive reference: connect directly to VCC (Option 1), or through a recommended 10 kΩ series resistor (Option 2), or leave unconnected (NC) when the internal ESD diode is used as the reference (Option 3)."
      },
      {
        "number": "6",
        "name": "I/O 4",
        "type": "passive",
        "description": "Data line protected by the steering diodes, which clamp transients to the VCC rail or to ground; the array protects up to four data lines."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The datasheet has no explicit pin table for the SOT-563 package. Pin functions were derived from the; Pin 5 is optional, not a fixed supply pin. The datasheet describes three configurations, so the sche; The I/O pins are named generically (I/O 1 to I/O 4) by their order in the application figures, not b",
          "1/6 pins cited to the wrong page (name found elsewhere): ['2:GND@p5']"
        ],
        "pages_sent": 9,
        "cost_usd": 0.0546,
        "at": "2026-10-17T21:58:07"
      },
      "datasheet": {
        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8586202739822616576",
        "pages": 9,
        "sha256": "e6e145d4152f2942",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 6,
        "described": 6,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "nup4114upxv6t1g.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          1.6,
          1.6,
          0.63
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "76c34aa4905777c0a8abe4718019904a3a9f8343cab7cc056f4516b7ef5165fc",
        "checked": "2026-10-17",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "nup4114upxv6t1g-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          1.6,
          1.6,
          0.63
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "e46d840eb488f769a6507d073ffe67a9546897e2c8a11a4dd8b7df19044e5ccc",
        "checked": "2026-10-17",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}