main
Ray
Publish 0.1.0
07d4c99
NUP1301U
Nexperia · TVS · SC-70
NUP1301U from Nexperia, in a SC-70. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Ground connection; pin 1 is connected to ground in the rail-to-rail configuration and is tied to pin 2 per the datasheet notes. |
| 2 | VCC | power_in | Supply rail connection (supply voltage VCC); transients exceeding the forward voltage of one diode are directed to this rail or to GND. |
| 3 | I/O | bidirectional | Protected signal line (input/output) with ESD protection up to 30 kV per IEC 61000-4-2 contact discharge, measured from pin 3 to pins 1 and 2. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Nexperia |
| Package | SC-70 |
| Category | Circuit Protection |
| Pins | 3 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Repetitive peak reverse voltage | VRRM | 80 | V | 3 | |||
| Reverse voltage | VR | 80 | V | 3 | |||
| Forward current | IF | 215 | mA | 3 | |||
| Repetitive peak forward current | IFRM | 500 | mA | tp ≤ 1 ms; δ ≤ 0.25 | 3 | ||
| Rated peak pulse power | PPPM | 220 | W | 3 | |||
| Rated peak pulse current | IPPM | 11 | A | tp = 8/20 μs | 3 | ||
| Rated peak pulse current | IPPM | 4 | A | square wave; tp = 1 µs | 3 | ||
| Rated peak pulse current | IPPM | 1.5 | A | square wave; tp = 1 ms | 3 | ||
| Non-repetitive peak forward current | IFSM | 0.5 | A | square wave; tp = 1 s | 3 | ||
| Total power dissipation | Ptot | 200 | mW | Tamb ≤ 25 °C | 3 | ||
| Junction temperature | Tj | 150 | °C | 3 | |||
| Ambient temperature | Tamb | -55 | 150 | °C | 3 | ||
| Storage temperature | Tstg | -65 | 150 | °C | 3 | ||
| Electrostatic discharge voltage, IEC 61000-4-2 contact discharge | VESD | 30 | kV | IEC 61000-4-2 (contact discharge) | 3 | ||
| Electrostatic discharge voltage, machine model | VESD | 400 | V | machine model | 3 | ||
| Electrostatic discharge voltage, human body model | VESD | 10 | kV | MIL-STD-883 (human body model) | 3 | ||
| Thermal resistance from junction to ambient | Rth(j-a) | 625 | K/W | in free air | 4 | ||
| Thermal resistance from junction to solder point | Rth(j-sp) | 300 | K/W | 4 | |||
| Forward voltage | VF | 715 | mV | IF = 1 mA; Tamb = 25 °C | 4 | ||
| Forward voltage | VF | 855 | mV | IF = 10 mA; Tamb = 25 °C | 4 | ||
| Forward voltage | VF | 1 | V | IF = 50 mA; Tamb = 25 °C | 4 | ||
| Forward voltage | VF | 1.25 | V | IF = 150 mA; Tamb = 25 °C | 4 | ||
| Breakdown voltage | VBR | 100 | V | IR = 100 µA; Tamb = 25 °C | 4 | ||
| Reverse current | IR | 30 | nA | VR = 25 V; Tamb = 25 °C | 4 | ||
| Reverse current | IR | 100 | nA | VR = 80 V; Tamb = 25 °C | 4 | ||
| Reverse current | IR | 25 | µA | VR = 25 V; Tj = 150 °C | 4 | ||
| Reverse current | IR | 35 | µA | VR = 80 V; Tj = 150 °C | 4 | ||
| Diode capacitance | Cd | 0.6 | 0.75 | pF | f = 1 MHz; VR = 0 V; Tamb = 25 °C | 4 | |
| Clamping voltage | VCL | 3 | V | IPP = 1 A; Tamb = 25 °C | 4 | ||
| Clamping voltage | VCL | 20 | V | IPPM = 11 A; Tamb = 25 °C | 4 |
CAD (KiCad official)
- Symbol:
NUP1301U - Footprint:
Package_TO_SOT_SMD:SOT-323_SC-70 - 3D model: SC-70 (KiCad packages3D, STEP)
- 3D model files:
nup1301u-etched.step/nup1301u-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);nup1301u.step/nup1301u.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Nexperia datasheet (12 pp, sha256
b20cc780415e03dd, retrieved 2026-11-07, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# NUP1301U
**Nexperia** · TVS · SC-70
NUP1301U from Nexperia, in a SC-70. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Ground connection; pin 1 is connected to ground in the rail-to-rail configuration and is tied to pin 2 per the datasheet notes. |
| 2 | VCC | power_in | Supply rail connection (supply voltage VCC); transients exceeding the forward voltage of one diode are directed to this rail or to GND. |
| 3 | I/O | bidirectional | Protected signal line (input/output) with ESD protection up to 30 kV per IEC 61000-4-2 contact discharge, measured from pin 3 to pins 1 and 2. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Nexperia |
| Package | SC-70 |
| Category | Circuit Protection |
| Pins | 3 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Repetitive peak reverse voltage | VRRM | | | 80 | V | | 3 |
| Reverse voltage | VR | | | 80 | V | | 3 |
| Forward current | IF | | | 215 | mA | | 3 |
| Repetitive peak forward current | IFRM | | | 500 | mA | tp ≤ 1 ms; δ ≤ 0.25 | 3 |
| Rated peak pulse power | PPPM | | | 220 | W | | 3 |
| Rated peak pulse current | IPPM | | | 11 | A | tp = 8/20 μs | 3 |
| Rated peak pulse current | IPPM | | | 4 | A | square wave; tp = 1 µs | 3 |
| Rated peak pulse current | IPPM | | | 1.5 | A | square wave; tp = 1 ms | 3 |
| Non-repetitive peak forward current | IFSM | | | 0.5 | A | square wave; tp = 1 s | 3 |
| Total power dissipation | Ptot | | | 200 | mW | Tamb ≤ 25 °C | 3 |
| Junction temperature | Tj | | | 150 | °C | | 3 |
| Ambient temperature | Tamb | -55 | | 150 | °C | | 3 |
| Storage temperature | Tstg | -65 | | 150 | °C | | 3 |
| Electrostatic discharge voltage, IEC 61000-4-2 contact discharge | VESD | | | 30 | kV | IEC 61000-4-2 (contact discharge) | 3 |
| Electrostatic discharge voltage, machine model | VESD | | | 400 | V | machine model | 3 |
| Electrostatic discharge voltage, human body model | VESD | | | 10 | kV | MIL-STD-883 (human body model) | 3 |
| Thermal resistance from junction to ambient | Rth(j-a) | | | 625 | K/W | in free air | 4 |
| Thermal resistance from junction to solder point | Rth(j-sp) | | | 300 | K/W | | 4 |
| Forward voltage | VF | | | 715 | mV | IF = 1 mA; Tamb = 25 °C | 4 |
| Forward voltage | VF | | | 855 | mV | IF = 10 mA; Tamb = 25 °C | 4 |
| Forward voltage | VF | | | 1 | V | IF = 50 mA; Tamb = 25 °C | 4 |
| Forward voltage | VF | | | 1.25 | V | IF = 150 mA; Tamb = 25 °C | 4 |
| Breakdown voltage | VBR | 100 | | | V | IR = 100 µA; Tamb = 25 °C | 4 |
| Reverse current | IR | | | 30 | nA | VR = 25 V; Tamb = 25 °C | 4 |
| Reverse current | IR | | | 100 | nA | VR = 80 V; Tamb = 25 °C | 4 |
| Reverse current | IR | | | 25 | µA | VR = 25 V; Tj = 150 °C | 4 |
| Reverse current | IR | | | 35 | µA | VR = 80 V; Tj = 150 °C | 4 |
| Diode capacitance | Cd | | 0.6 | 0.75 | pF | f = 1 MHz; VR = 0 V; Tamb = 25 °C | 4 |
| Clamping voltage | VCL | | | 3 | V | IPP = 1 A; Tamb = 25 °C | 4 |
| Clamping voltage | VCL | | | 20 | V | IPPM = 11 A; Tamb = 25 °C | 4 |
## CAD (KiCad official)
- Symbol: `NUP1301U`
- Footprint: `Package_TO_SOT_SMD:SOT-323_SC-70`
- 3D model: SC-70 (KiCad packages3D, STEP)
- 3D model files: `nup1301u-etched.step` / `nup1301u-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `nup1301u.step` / `nup1301u.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Nexperia datasheet](https://assets.nexperia.com/documents/data-sheet/NUP1301U.pdf) (12 pp, sha256 `b20cc780415e03dd`, retrieved 2026-11-07, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/nup1301u-datasheet.pdf)