component
NUD4001DR2G
Public Made by Adomby adom
onsemi LED Drivers, SOIC-8. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownNUD4001DR2G
onsemi · LED Drivers · SOIC-8
NUD4001DR2G from onsemi, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Vin | power_in | Positive input voltage to the device. Continuous rating 30 V, non-repetitive peak 60 V (t <= 1 ms). Supplies the internal current-source control circuit and the LED string via the external Rext. |
| 2 | Boost | output | Optional boost pin used to drive an external transistor for higher current or PWM operation, as described in ON Semi App Note AND8198/D. Left unconnected in the basic LED-driver configuration (the package soldering-footprint sheet labels this pin as N/C). |
| 3 | Rext | passive | External current-set resistor pin. A resistor connected between Rext and Vin programs the LED drive current (Iout = Vsense / Rext, e.g. Rext = 2.0 ohm gives ~325 mA at 12 V in). See Figure 1 for Rext vs Iout. |
| 4 | GND | power_in | Device ground reference for the internal current-source control circuitry. |
| 5 | Iout | output | Regulated LED current output. Cathode(s) of the driven LED string connect from this pin to ground. Rated up to 500 mA (with Vdrop <= 2.2 V); Vout max 28 V. Pins 5-8 are tied internally to the same current-source output and are typically paralleled. |
| 6 | Iout | output | Regulated LED current output (internally common with pins 5, 7, 8). Connect LED cathode(s) from this pin to ground. Parallel pins 5-8 to spread current and improve thermal performance. |
| 7 | Iout | output | Regulated LED current output (internally common with pins 5, 6, 8). Connect LED cathode(s) from this pin to ground. |
| 8 | Iout | output | Regulated LED current output (internally common with pins 5, 6, 7). Connect LED cathode(s) from this pin to ground. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | onsemi |
| Package | SOIC-8 |
| Category | LED-drv |
| Pins | 8 |
Ordering variants
Same part, different packaging or reel option.
NUD4001DR2GNUD4001DR2GNSVD4001DR2G
CAD (KiCad official)
- Symbol:
NUD4001DR2G - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
nud4001dr2g-etched.step/nud4001dr2g-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);nud4001dr2g.step/nud4001dr2g.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: onsemi datasheet (8 pp, sha256
385fc571e81f6ce3, retrieved 2026-08-17, tier: manufacturer) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).