Made with KiCad 10.0 · needs KiCad 10.0 or later to open · KiCad file format 20260206
NT5CB256M16DP-EK
Nanya Tech · DDR SDRAM · BGA-96
NT5CB256M16DP-EK from Nanya Tech, in a BGA-96. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| A1 | VDDQ | power_in | DQ output buffer supply (1.5V ±0.075V for DDR3, 1.35V -0.067/+0.1V for DDR3L). |
| A2 | DQU5 | bidirectional | Upper-byte data input/output bit 5. |
| A3 | DQU7 | bidirectional | Upper-byte data input/output bit 7. |
| A7 | DQU4 | bidirectional | Upper-byte data input/output bit 4. |
| A8 | VDDQ | power_in | DQ output buffer supply (1.5V ±0.075V for DDR3, 1.35V -0.067/+0.1V for DDR3L). |
| A9 | VSS | power_in | Ground. |
| B1 | VSSQ | power_in | DQ ground. |
| B2 | VDD | power_in | Core power supply (1.5V ±0.075V for DDR3, 1.35V -0.067/+0.1V for DDR3L). |
| B3 | VSS | power_in | Ground. |
| B7 | DQSU# | bidirectional | Upper-byte differential data strobe complement. |
| B8 | DQU6 | bidirectional | Upper-byte data input/output bit 6. |
| B9 | VSSQ | power_in | DQ ground. |
| C1 | VDDQ | power_in | DQ output buffer supply (1.5V ±0.075V for DDR3, 1.35V -0.067/+0.1V for DDR3L). |
| C2 | DQU3 | bidirectional | Upper-byte data input/output bit 3. |
| C3 | DQU1 | bidirectional | Upper-byte data input/output bit 1. |
| C7 | DQSU | bidirectional | Upper-byte differential data strobe. |
| C8 | DQU2 | bidirectional | Upper-byte data input/output bit 2. |
| C9 | VDDQ | power_in | DQ output buffer supply (1.5V ±0.075V for DDR3, 1.35V -0.067/+0.1V for DDR3L). |
| D1 | VSSQ | power_in | DQ ground. |
| D2 | VDDQ | power_in | DQ output buffer supply (1.5V ±0.075V for DDR3, 1.35V -0.067/+0.1V for DDR3L). |
| D3 | DMU | input | Upper-byte input data mask; write data is masked when DMU is sampled HIGH coincident with that data, sampled on both edges of DQS. |
| D7 | DQU0 | bidirectional | Upper-byte data input/output bit 0. |
| D8 | VSSQ | power_in | DQ ground. |
| D9 | VDD | power_in | Core power supply (1.5V ±0.075V for DDR3, 1.35V -0.067/+0.1V for DDR3L). |
| E1 | VSS | power_in | Ground. |
| E2 | VSSQ | power_in | DQ ground. |
| E3 | DQL0 | bidirectional | Lower-byte data input/output bit 0. |
| E7 | DML | input | Lower-byte input data mask; write data is masked when DML is sampled HIGH coincident with that data, sampled on both edges of DQS. |
| E8 | VSSQ | power_in | DQ ground. |
| E9 | VDDQ | power_in | DQ output buffer supply (1.5V ±0.075V for DDR3, 1.35V -0.067/+0.1V for DDR3L). |
| F1 | VDDQ | power_in | DQ output buffer supply (1.5V ±0.075V for DDR3, 1.35V -0.067/+0.1V for DDR3L). |
| F2 | DQL2 | bidirectional | Lower-byte data input/output bit 2. |
| F3 | DQSL | bidirectional | Lower-byte differential data strobe. |
| F7 | DQL1 | bidirectional | Lower-byte data input/output bit 1. |
| F8 | DQL3 | bidirectional | Lower-byte data input/output bit 3. |
| F9 | VSSQ | power_in | DQ ground. |
| G1 | VSSQ | power_in | DQ ground. |
| G2 | DQL6 | bidirectional | Lower-byte data input/output bit 6. |
| G3 | DQSL# | bidirectional | Lower-byte differential data strobe complement. |
| G7 | VDD | power_in | Core power supply (1.5V ±0.075V for DDR3, 1.35V -0.067/+0.1V for DDR3L). |
| G8 | VSS | power_in | Ground. |
| G9 | VSSQ | power_in | DQ ground. |
| H1 | VREFDQ | input | Reference voltage for DQ inputs. |
| H2 | VDDQ | power_in | DQ output buffer supply (1.5V ±0.075V for DDR3, 1.35V -0.067/+0.1V for DDR3L). |
| H3 | DQL4 | bidirectional | Lower-byte data input/output bit 4. |
| H7 | DQL7 | bidirectional | Lower-byte data input/output bit 7. |
| H8 | DQL5 | bidirectional | Lower-byte data input/output bit 5. |
| H9 | VDDQ | power_in | DQ output buffer supply (1.5V ±0.075V for DDR3, 1.35V -0.067/+0.1V for DDR3L). |
| J1 | NC | unconnected | No connect. |
| J2 | VSS | power_in | Ground. |
| J3 | RAS# | input | Command input; together with CS#, CAS# and WE# defines the command being entered. |
| J7 | CK | input | Differential clock input; address and control inputs are sampled on the crossing of CK rising and CK# falling. |
| J8 | VSS | power_in | Ground. |
| J9 | NC | unconnected | No connect. |
| K1 | ODT | input | On-die termination enable; when registered HIGH it enables internal termination, ignored if MR1 and MR2 disable RTT. |
| K2 | VDD | power_in | Core power supply (1.5V ±0.075V for DDR3, 1.35V -0.067/+0.1V for DDR3L). |
| K3 | CAS# | input | Command input; together with CS#, RAS# and WE# defines the command being entered. |
| K7 | CK# | input | Differential clock input complement; address and control inputs are sampled on the crossing of CK rising and CK# falling. |
| K8 | VDD | power_in | Core power supply (1.5V ±0.075V for DDR3, 1.35V -0.067/+0.1V for DDR3L). |
| K9 | CKE | input | Clock enable; HIGH activates and LOW deactivates internal clock signals, input buffers and output drivers, and must be held high throughout read and write accesses. |
| L1 | NC | unconnected | No connect. |
| L2 | CS# | input | Chip select; all commands are masked when CS# is registered high, and it is part of the command code. |
| L3 | WE# | input | Command input; together with CS#, RAS# and CAS# defines the command being entered. |
| L7 | A10/AP | input | Address bit 10 and auto-precharge select: HIGH autoprecharge, LOW none; during Precharge HIGH applies to all banks. |
| L8 | ZQ | passive | ZQ calibration reference pin for DS/ODT impedance, connected to external 240 ohm ±1% resistor. |
| L9 | NC | unconnected | No connect. |
| M1 | VSS | power_in | Ground. |
| M2 | BA0 | input | Bank address input selecting the bank for Active, Read, Write or Precharge and the mode register during MRS. |
| M3 | BA2 | input | Bank address input selecting the bank for Active, Read, Write or Precharge and the mode register during MRS. |
| M7 | NC | unconnected | No connect. |
| M8 | VREFCA | input | Reference voltage for command/address inputs. |
| M9 | VSS | power_in | Ground. |
| N1 | VDD | power_in | Core power supply (1.5V ±0.075V for DDR3, 1.35V -0.067/+0.1V for DDR3L). |
| N2 | A3 | input | Address input providing row address for Activate and column address for Read/Write, and op-code during MRS. |
| N3 | A0 | input | Address input providing row address for Activate and column address for Read/Write, and op-code during MRS. |
| N7 | A12/BC# | input | Address bit 12 and burst chop select sampled during Read/Write: HIGH no burst chop, LOW burst chopped. |
| N8 | BA1 | input | Bank address input selecting the bank for Active, Read, Write or Precharge and the mode register during MRS. |
| N9 | VDD | power_in | Core power supply (1.5V ±0.075V for DDR3, 1.35V -0.067/+0.1V for DDR3L). |
| P1 | VSS | power_in | Ground. |
| P2 | A5 | input | Address input providing row address for Activate and column address for Read/Write, and op-code during MRS. |
| P3 | A2 | input | Address input providing row address for Activate and column address for Read/Write, and op-code during MRS. |
| P7 | A1 | input | Address input providing row address for Activate and column address for Read/Write, and op-code during MRS. |
| P8 | A4 | input | Address input providing row address for Activate and column address for Read/Write, and op-code during MRS. |
| P9 | VSS | power_in | Ground. |
| R1 | VDD | power_in | Core power supply (1.5V ±0.075V for DDR3, 1.35V -0.067/+0.1V for DDR3L). |
| R2 | A7 | input | Address input providing row address for Activate and column address for Read/Write, and op-code during MRS. |
| R3 | A9 | input | Address input providing row address for Activate and column address for Read/Write, and op-code during MRS. |
| R7 | A11 | input | Address input providing row address for Activate and column address for Read/Write, and op-code during MRS. |
| R8 | A6 | input | Address input providing row address for Activate and column address for Read/Write, and op-code during MRS. |
| R9 | VDD | power_in | Core power supply (1.5V ±0.075V for DDR3, 1.35V -0.067/+0.1V for DDR3L). |
| T1 | VSS | power_in | Ground. |
| T2 | RESET# | input | Active-low asynchronous reset input. |
| T3 | A13 | input | Address input providing row address for Activate and column address for Read/Write, and op-code during MRS. |
| T7 | A14 | input | Address input providing row address for Activate and op-code during MRS; highest address bit on x16 (A0-A14). |
| T8 | A8 | input | Address input providing row address for Activate and column address for Read/Write, and op-code during MRS. |
| T9 | VSS | power_in | Ground. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Nanya Tech |
| Package | BGA-96 |
| Category | Memory |
| Pins | 96 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| tAA (CL to first data delay) | tAA | 13.91 | 20 | ns | DDR3(L)-1866 13-13-13 speed bin | 2 | |
| tRCD (ACT to internal read/write delay) | tRCD | 13.91 | ns | DDR3(L)-1866 13-13-13 speed bin | 2 | ||
| tRP (PRE command period) | tRP | 13.91 | ns | DDR3(L)-1866 13-13-13 speed bin | 2 | ||
| tRC (ACT to ACT or REF command period) | tRC | 47.91 | ns | DDR3(L)-1866 13-13-13 speed bin | 2 | ||
| tRAS (ACTIVE to PRECHARGE command period) | tRAS | 34 | ns | DDR3(L)-1866 13-13-13 speed bin; printed max is 9*tREFI | 2 | ||
| VDD supply voltage (DDR3, 1.5 V) | VDD | 1.425 | 1.5 | 1.575 | V | DDR3 1.5 V part; DDR3L rows not applicable | 91 |
| VDDQ supply voltage for output (DDR3, 1.5 V) | VDDQ | 1.425 | 1.5 | 1.575 | V | DDR3 1.5 V part; VDDQ tracks VDD | 91 |
| Voltage on VDD pin relative to Vss | VDD | -0.4 | 1.8 | V | Absolute maximum DC rating | 89 | |
| Voltage on VDDQ pin relative to Vss | VDDQ | -0.4 | 1.8 | V | Absolute maximum DC rating | 89 | |
| Voltage on any pin relative to Vss | Vin, Vout | -0.4 | 1.8 | V | Absolute maximum DC rating | 89 | |
| Storage temperature | Tstg | -55 | 150 | C | Case surface temperature at center/top of DRAM | 89 | |
| Operating temperature range (commercial grade) | TOPER | 0 | 95 | C | Commercial grade; normal 0<=TOPER<=85 C, extended 85<TOPER<=95 C; case surface temperature | 90 | |
| Maximum peak overshoot amplitude, address and control pins | 0.4 | V | Address and control pins; 1866 column | 110 | |||
| Maximum peak undershoot amplitude, address and control pins | 0.4 | V | Address and control pins; 1866 column | 110 | |||
| Maximum overshoot area above VDD, address and control pins | 0.28 | V-ns | Address and control pins; 1866 column | 110 | |||
| Maximum undershoot area below VSS, address and control pins | 0.28 | V-ns | Address and control pins; 1866 column | 110 | |||
| Maximum peak overshoot amplitude, clock, data, strobe and mask | 0.4 | V | Clock, data, strobe and mask; 1866 column | 111 | |||
| Maximum peak undershoot amplitude, clock, data, strobe and mask | 0.4 | V | Clock, data, strobe and mask; 1866 column | 111 | |||
| Maximum overshoot area above VDD, clock, data, strobe and mask | 0.11 | V-ns | Clock, data, strobe and mask; 1866 column | 111 | |||
| Maximum undershoot area below VSS, clock, data, strobe and mask | 0.11 | V-ns | Clock, data, strobe and mask; 1866 column | 111 | |||
| Output driver pull-down impedance, 34 ohm, VOL | RON34Pd | 0.6 | 1 | 1.1 | RZQ/7 | VOLdc = 0.2 x VDDQ; RZQ = 240 ohm; after ZQ calibration; DDR3 block | 113 |
| Output driver pull-down impedance, 34 ohm, VOM | RON34Pd | 0.9 | 1 | 1.1 | RZQ/7 | VOMdc = 0.5 x VDDQ; RZQ = 240 ohm; after ZQ calibration; DDR3 block | 113 |
| Output driver pull-down impedance, 34 ohm, VOH | RON34Pd | 0.9 | 1 | 1.4 | RZQ/7 | VOHdc = 0.8 x VDDQ; RZQ = 240 ohm; after ZQ calibration; DDR3 block | 113 |
| Output driver pull-up impedance, 34 ohm, VOL | RON34Pu | 0.9 | 1 | 1.4 | RZQ/7 | VOLdc = 0.2 x VDDQ; RZQ = 240 ohm; after ZQ calibration; DDR3 block | 113 |
| Output driver pull-up impedance, 34 ohm, VOM | RON34Pu | 0.9 | 1 | 1.1 | RZQ/7 | VOMdc = 0.5 x VDDQ; RZQ = 240 ohm; after ZQ calibration; DDR3 block | 113 |
| Output driver pull-up impedance, 34 ohm, VOH | RON34Pu | 0.6 | 1 | 1.1 | RZQ/7 | VOHdc = 0.8 x VDDQ; RZQ = 240 ohm; after ZQ calibration; DDR3 block | 113 |
| Output driver pull-down impedance, 40 ohm, VOL | RON40Pd | 0.6 | 1 | 1.1 | RZQ/6 | VOLdc = 0.2 x VDDQ; RZQ = 240 ohm; after ZQ calibration; DDR3 block | 113 |
| Output driver pull-down impedance, 40 ohm, VOM | RON40Pd | 0.9 | 1 | 1.1 | RZQ/6 | VOMdc = 0.5 x VDDQ; RZQ = 240 ohm; after ZQ calibration; DDR3 block | 113 |
| Output driver pull-down impedance, 40 ohm, VOH | RON40Pd | 0.9 | 1 | 1.4 | RZQ/6 | VOHdc = 0.8 x VDDQ; RZQ = 240 ohm; after ZQ calibration; DDR3 block | 113 |
| Output driver pull-up impedance, 40 ohm, VOL | RON40Pu | 0.9 | 1 | 1.4 | RZQ/6 | VOLdc = 0.2 x VDDQ; RZQ = 240 ohm; after ZQ calibration; DDR3 block | 113 |
| Output driver pull-up impedance, 40 ohm, VOM | RON40Pu | 0.9 | 1 | 1.1 | RZQ/6 | VOMdc = 0.5 x VDDQ; RZQ = 240 ohm; after ZQ calibration; DDR3 block | 113 |
| Output driver pull-up impedance, 40 ohm, VOH | RON40Pu | 0.6 | 1 | 1.1 | RZQ/6 | VOHdc = 0.8 x VDDQ; RZQ = 240 ohm; after ZQ calibration; DDR3 block | 113 |
| Mismatch between pull-up and pull-down | MMPuPd | -10 | 10 | % | VOMdc = 0.5 x VDDQ | 113 | |
| ODT 120 ohm pull-down, VOL | RTT120Pd240 | 0.6 | 1 | 1.1 | RZQ | VOLdc = 0.2 x VDDQ; RZQ = 240 ohm +/-1%; after ZQ calibration; DDR3 block | 118 |
| ODT 120 ohm pull-down, VOM | RTT120Pd240 | 0.9 | 1 | 1.1 | RZQ | VOMdc = 0.5 x VDDQ; RZQ = 240 ohm +/-1%; DDR3 block | 118 |
| ODT 120 ohm pull-down, VOH | RTT120Pd240 | 0.9 | 1 | 1.4 | RZQ | VOHdc = 0.8 x VDDQ; RZQ = 240 ohm +/-1%; DDR3 block | 118 |
| ODT 120 ohm pull-up, VOL | RTT120Pu240 | 0.9 | 1 | 1.4 | RZQ | VOLdc = 0.2 x VDDQ; RZQ = 240 ohm +/-1%; DDR3 block | 118 |
| ODT 120 ohm pull-up, VOM | RTT120Pu240 | 0.9 | 1 | 1.1 | RZQ | VOMdc = 0.5 x VDDQ; RZQ = 240 ohm +/-1%; DDR3 block | 118 |
| ODT 120 ohm pull-up, VOH | RTT120Pu240 | 0.6 | 1 | 1.1 | RZQ | VOHdc = 0.8 x VDDQ; RZQ = 240 ohm +/-1%; DDR3 block | 118 |
| ODT 120 ohm effective resistance, VIL(ac) to VIH(ac) | RTT120 | 0.9 | 1 | 1.6 | RZQ/2 | Measured VIL(ac) to VIH(ac); RZQ = 240 ohm +/-1% | 118 |
| ODT 60 ohm pull-down, VOL | RTT60Pd120 | 0.6 | 1 | 1.1 | RZQ/2 | VOLdc = 0.2 x VDDQ; RZQ = 240 ohm +/-1%; DDR3 block | 118 |
| ODT 60 ohm pull-down, VOM | RTT60Pd120 | 0.9 | 1 | 1.1 | RZQ/2 | VOMdc = 0.5 x VDDQ; RZQ = 240 ohm +/-1%; DDR3 block | 118 |
| ODT 60 ohm pull-down, VOH | RTT60Pd120 | 0.9 | 1 | 1.4 | RZQ/2 | VOHdc = 0.8 x VDDQ; RZQ = 240 ohm +/-1%; DDR3 block | 118 |
| ODT 60 ohm pull-up, VOL | RTT60Pu120 | 0.9 | 1 | 1.4 | RZQ/2 | VOLdc = 0.2 x VDDQ; RZQ = 240 ohm +/-1%; DDR3 block | 118 |
| ODT 60 ohm pull-up, VOM | RTT60Pu120 | 0.9 | 1 | 1.1 | RZQ/2 | VOMdc = 0.5 x VDDQ; RZQ = 240 ohm +/-1%; DDR3 block | 118 |
| ODT 60 ohm pull-up, VOH | RTT60Pu120 | 0.6 | 1 | 1.1 | RZQ/2 | VOHdc = 0.8 x VDDQ; RZQ = 240 ohm +/-1%; DDR3 block | 118 |
| ODT 60 ohm effective resistance, VIL(ac) to VIH(ac) | RTT60 | 0.9 | 1 | 1.6 | RZQ/4 | Measured VIL(ac) to VIH(ac); RZQ = 240 ohm +/-1% | 118 |
| ODT 40 ohm pull-down, VOL | RTT40Pd80 | 0.6 | 1 | 1.1 | RZQ/3 | VOLdc = 0.2 x VDDQ; RZQ = 240 ohm +/-1%; DDR3 block | 118 |
| ODT 40 ohm pull-down, VOM | RTT40Pd80 | 0.9 | 1 | 1.1 | RZQ/3 | VOMdc = 0.5 x VDDQ; RZQ = 240 ohm +/-1%; DDR3 block | 118 |
| ODT 40 ohm pull-down, VOH | RTT40Pd80 | 0.9 | 1 | 1.4 | RZQ/3 | VOHdc = 0.8 x VDDQ; RZQ = 240 ohm +/-1%; DDR3 block | 118 |
| ODT 40 ohm pull-up, VOL | RTT40Pu80 | 0.9 | 1 | 1.4 | RZQ/3 | VOLdc = 0.2 x VDDQ; RZQ = 240 ohm +/-1%; DDR3 block | 118 |
| ODT 40 ohm pull-up, VOM | RTT40Pu80 | 0.9 | 1 | 1.1 | RZQ/3 | VOMdc = 0.5 x VDDQ; RZQ = 240 ohm +/-1%; DDR3 block | 118 |
| ODT 40 ohm pull-up, VOH | RTT40Pu80 | 0.6 | 1 | 1.1 | RZQ/3 | VOHdc = 0.8 x VDDQ; RZQ = 240 ohm +/-1%; DDR3 block | 118 |
| ODT 40 ohm effective resistance, VIL(ac) to VIH(ac) | RTT40 | 0.9 | 1 | 1.6 | RZQ/6 | Measured VIL(ac) to VIH(ac); RZQ = 240 ohm +/-1% | 118 |
| Deviation of VM with respect to VDDQ/2 | DVM | -5 | 5 | % | VM measured at test pin with no load | 118 | |
| ODT temperature sensitivity dRTTdT | dRTTdT | 0 | 1.5 | %/C | Delta T after calibration; verified by design, not production tested | 120 | |
| ODT voltage sensitivity dRTTdV | dRTTdV | 0 | 0.15 | %/mV | Delta V after calibration; verified by design, not production tested | 120 | |
| Refresh cycle time REF to ACT or REF (4Gb) | tRFC | 260 | ns | 4Gb device density; single value printed | 89 | ||
| Average refresh interval tREFI (Tc<=85 C) | tREFI | 7.8 | us | Tc<=85 C | 1 | ||
| Average refresh interval tREFI (Tc>85 C) | tREFI | 3.9 | us | Tc>85 C | 1 |
CAD (KiCad official)
- Symbol:
NT5CB256M16DP-EK - Footprint:
Package_BGA:BGA-96_9.0x13.0mm_Layout2x3x16_P0.8mm - 3D model: BGA-96 (KiCad packages3D, STEP)
- 3D model files:
nt5cb256m16dp-ek-etched.step/nt5cb256m16dp-ek-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);nt5cb256m16dp-ek.step/nt5cb256m16dp-ek.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Nanya Tech datasheet (163 pp, sha256
97f2ec33c7e5cd9d, retrieved 2026-10-29, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text+vision), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).