main
Ray
Publish 0.1.0
f1b37c0
NT3H2111W0FTTJ
NXP Semicon · RF Chips · MSOP-8
NT3H2111W0FTTJ from NXP Semicon, in a MSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | LA | passive | Antenna connection LA; the NFC coil connects between LA and LB and supplies both energy and data to the tag. |
| 2 | VSS | power_in | Ground (GND) reference pin for the device. |
| 3 | SCL | input | Serial clock input for the I2C interface. |
| 4 | FD | output | Open-drain field detection output that is pulled low on configured NFC events and requires an external pull-up resistor greater than 2 kΩ. |
| 5 | SDA | bidirectional | Serial data line for the I2C interface. |
| 6 | VCC | power_in | VCC supply input from an external power supply, shown as 1.2 V to 3.6 V in the FD example circuit. |
| 7 | VOUT | power_out | Voltage output from energy harvesting, which may also be used as the field detection trigger. |
| 8 | LB | passive | Antenna connection LB, paired with LA to form the NFC coil connection. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | NXP Semicon |
| Package | MSOP-8 |
| Category | RF & Radio |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Storage temperature | Tstg | -55 | 125 | °C | 67 | ||
| Maximum junction temperature | Tj(max) | 105 | °C | 67 | |||
| Electrostatic discharge voltage (HBM) | VESD | 2 | kV | human body model (HBM) | 67 | ||
| Electrostatic discharge voltage (CDM) | VESD | 1 | kV | charge device model (CDM) | 67 | ||
| Supply voltage on pin VCC | VDD | -0.5 | 4.6 | V | 67 | ||
| Input voltage on pin FD, SDA, SCL | Vi | -0.5 | 4.6 | V | 67 | ||
| Input current on pin LA, LB | Ii | 40 | mA | 67 | |||
| RF input voltage on pin LA, LB | Vi(RF) | 4.6 | Vpeak | 67 | |||
| Supply voltage | VCC | 1.67 | 3.6 | V | supplied via VCC only | 68 | |
| Operating ambient temperature | Tamb | -40 | 25 | 105 | °C | 68 | |
| Input capacitance LA-LB | CIC | 44 | 50 | 56 | pF | f=13.56 MHz, VLA-LB=2.4 VRMS | 68 |
| Supply current, idle bus, I2C at 400 kHz, VCC=1.8 V | IDD | 185 | μA | VCC=1.8 V I2C@400KHz | 68 | ||
| Supply current, I2C at 400 kHz, VCC=2.5 V | IDD | 210 | μA | VCC=2.5 V I2C@400KHz | 68 | ||
| Supply current, I2C at 400 kHz, VCC=3.3 V | IDD | 240 | μA | VCC=3.3 V I2C@400KHz | 68 | ||
| LOW-level output voltage (I2C pins) | VOL | 0.4 | V | IOL= 3 mA; VCC > 2 V | 68 | ||
| LOW-level output voltage (I2C pins) | VOL | 0.2 | V | IOL= 2 mA; VCC < 2 V | 68 | ||
| Input capacitance SCL and SDA pin | Ci | 2.4 | pF | 68 | |||
| Leakage current (I2C pins) | IL | 10 | μA | 0 V and VCC,max | 68 | ||
| SCL high time | thigh | 950 | ns | fast mode 400 kHz | 68 | ||
| LOW-level output voltage (FD pin) | VOL | 0.4 | V | IOL= 4 mA; VCC > 2 V | 68 | ||
| LOW-level output voltage (FD pin) | VOL | 0.2 | V | IOL= 3 mA; VCC < 2 V | 68 | ||
| Leakage current (FD pin) | IL | 1.5 | 10 | μA | 68 | ||
| Retention time | tret | 20 | 50 | year | Tamb | 69 | |
| Write endurance | Nendu(W) | 200000 | cycle | Tamb | 69 | ||
| Write endurance | Nendu(W) | 500000 | 1e+06 | cycle | -40 °C to 95 °C | 69 | |
| Thermal resistance junction-ambient, TSSOP8 package | RTH_JA | 211 | K/W | JEDEC 2s2p board and TSSOP8 package | 68 | ||
| Supply current, idle bus, VCC=1.8 V | IDD | 160 | μA | I2C; idle bus | 68 | ||
| Supply current, idle bus, VCC=3.3 V | IDD | 195 | μA | I2C; idle bus | 68 | ||
| Input frequency | fi | 13.56 | MHz | 68 |
CAD (KiCad official)
- Symbol:
NT3H2111W0FTTJ - Footprint:
Package_SO:MSOP-8_3x3mm_P0.65mm - 3D model: MSOP-8 (KiCad packages3D, STEP)
- 3D model files:
nt3h2111w0fttj-etched.step/nt3h2111w0fttj-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);nt3h2111w0fttj.step/nt3h2111w0fttj.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: NXP Semicon datasheet (84 pp, sha256
44a7cbee12209991, retrieved 2026-11-02, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# NT3H2111W0FTTJ
**NXP Semicon** · RF Chips · MSOP-8
NT3H2111W0FTTJ from NXP Semicon, in a MSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | LA | passive | Antenna connection LA; the NFC coil connects between LA and LB and supplies both energy and data to the tag. |
| 2 | VSS | power_in | Ground (GND) reference pin for the device. |
| 3 | SCL | input | Serial clock input for the I2C interface. |
| 4 | FD | output | Open-drain field detection output that is pulled low on configured NFC events and requires an external pull-up resistor greater than 2 kΩ. |
| 5 | SDA | bidirectional | Serial data line for the I2C interface. |
| 6 | VCC | power_in | VCC supply input from an external power supply, shown as 1.2 V to 3.6 V in the FD example circuit. |
| 7 | VOUT | power_out | Voltage output from energy harvesting, which may also be used as the field detection trigger. |
| 8 | LB | passive | Antenna connection LB, paired with LA to form the NFC coil connection. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | NXP Semicon |
| Package | MSOP-8 |
| Category | RF & Radio |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Storage temperature | Tstg | -55 | | 125 | °C | | 67 |
| Maximum junction temperature | Tj(max) | | | 105 | °C | | 67 |
| Electrostatic discharge voltage (HBM) | VESD | | | 2 | kV | human body model (HBM) | 67 |
| Electrostatic discharge voltage (CDM) | VESD | | | 1 | kV | charge device model (CDM) | 67 |
| Supply voltage on pin VCC | VDD | -0.5 | | 4.6 | V | | 67 |
| Input voltage on pin FD, SDA, SCL | Vi | -0.5 | | 4.6 | V | | 67 |
| Input current on pin LA, LB | Ii | | | 40 | mA | | 67 |
| RF input voltage on pin LA, LB | Vi(RF) | | | 4.6 | Vpeak | | 67 |
| Supply voltage | VCC | 1.67 | | 3.6 | V | supplied via VCC only | 68 |
| Operating ambient temperature | Tamb | -40 | 25 | 105 | °C | | 68 |
| Input capacitance LA-LB | CIC | 44 | 50 | 56 | pF | f=13.56 MHz, VLA-LB=2.4 VRMS | 68 |
| Supply current, idle bus, I2C at 400 kHz, VCC=1.8 V | IDD | | | 185 | μA | VCC=1.8 V I2C@400KHz | 68 |
| Supply current, I2C at 400 kHz, VCC=2.5 V | IDD | | | 210 | μA | VCC=2.5 V I2C@400KHz | 68 |
| Supply current, I2C at 400 kHz, VCC=3.3 V | IDD | | | 240 | μA | VCC=3.3 V I2C@400KHz | 68 |
| LOW-level output voltage (I2C pins) | VOL | | | 0.4 | V | IOL= 3 mA; VCC > 2 V | 68 |
| LOW-level output voltage (I2C pins) | VOL | | | 0.2 | V | IOL= 2 mA; VCC < 2 V | 68 |
| Input capacitance SCL and SDA pin | Ci | | 2.4 | | pF | | 68 |
| Leakage current (I2C pins) | IL | | | 10 | μA | 0 V and VCC,max | 68 |
| SCL high time | thigh | 950 | | | ns | fast mode 400 kHz | 68 |
| LOW-level output voltage (FD pin) | VOL | | | 0.4 | V | IOL= 4 mA; VCC > 2 V | 68 |
| LOW-level output voltage (FD pin) | VOL | | | 0.2 | V | IOL= 3 mA; VCC < 2 V | 68 |
| Leakage current (FD pin) | IL | | 1.5 | 10 | μA | | 68 |
| Retention time | tret | 20 | 50 | | year | Tamb | 69 |
| Write endurance | Nendu(W) | 200000 | | | cycle | Tamb | 69 |
| Write endurance | Nendu(W) | 500000 | 1e+06 | | cycle | -40 °C to 95 °C | 69 |
| Thermal resistance junction-ambient, TSSOP8 package | RTH_JA | | 211 | | K/W | JEDEC 2s2p board and TSSOP8 package | 68 |
| Supply current, idle bus, VCC=1.8 V | IDD | | 160 | | μA | I2C; idle bus | 68 |
| Supply current, idle bus, VCC=3.3 V | IDD | | 195 | | μA | I2C; idle bus | 68 |
| Input frequency | fi | | 13.56 | | MHz | | 68 |
## CAD (KiCad official)
- Symbol: `NT3H2111W0FTTJ`
- Footprint: `Package_SO:MSOP-8_3x3mm_P0.65mm`
- 3D model: MSOP-8 (KiCad packages3D, STEP)
- 3D model files: `nt3h2111w0fttj-etched.step` / `nt3h2111w0fttj-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `nt3h2111w0fttj.step` / `nt3h2111w0fttj.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [NXP Semicon datasheet](https://www.nxp.com/docs/en/data-sheet/NT3H2111W0FTTJ.pdf) (84 pp, sha256 `44a7cbee12209991`, retrieved 2026-11-02, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/nt3h2111w0fttj-datasheet.pdf)