3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownNSVMMUN2232LT1G
onsemi · Digital Transistors · SOT-23
NSVMMUN2232LT1G from onsemi, in a SOT-23. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | BASE | input | Base (input) pin, connected through the internal 4.7 kΩ series base resistor R1; the datasheet limits the input forward voltage to 30 Vdc and the input reverse voltage to 10 Vdc. |
| 2 | EMITTER | power_in | Emitter pin, labeled GROUND in the datasheet pin connections, with the internal 4.7 kΩ base-emitter resistor R2 connected between it and the base. |
| 3 | COLLECTOR | output | Collector (output) pin, rated at a collector-emitter voltage VCEO of 50 Vdc and a continuous collector current IC of 100 mAdc. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | onsemi |
| Package | SOT-23 |
| Category | Triode/MOS Tube/Transistor |
| Pins | 3 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Collector−Base Voltage | VCBO | 50 | Vdc | TA = 25°C | 1 | ||
| Collector−Emitter Voltage | VCEO | 50 | Vdc | TA = 25°C | 1 | ||
| Collector Current − Continuous | IC | 100 | mAdc | TA = 25°C | 1 | ||
| Input Forward Voltage | VIN(fwd) | 30 | Vdc | TA = 25°C | 1 | ||
| Input Reverse Voltage | VIN(rev) | 10 | Vdc | TA = 25°C | 1 | ||
| Collector−Base Cutoff Current | ICBO | 100 | nAdc | VCB = 50 V, IE = 0 | 4 | ||
| Collector−Emitter Cutoff Current | ICEO | 500 | nAdc | VCE = 50 V, IB = 0 | 4 | ||
| Emitter−Base Cutoff Current | IEBO | 1.5 | mAdc | VEB = 6.0 V, IC = 0 | 4 | ||
| Collector−Base Breakdown Voltage | V(BR)CBO | 50 | Vdc | IC = 10 A, IE = 0 | 4 | ||
| Collector−Emitter Breakdown Voltage | V(BR)CEO | 50 | Vdc | IC = 2.0 mA, IB = 0 | 4 | ||
| DC Current Gain | hFE | 15 | 30 | IC = 5.0 mA, VCE = 10 V | 4 | ||
| Collector−Emitter Saturation Voltage | VCE(sat) | 0.25 | Vdc | IC = 10 mA, IB = 1.0 mA | 4 | ||
| Input Voltage (off) | Vi(off) | 1.2 | 0.5 | Vdc | VCE = 5.0 V, IC = 100 A | 4 | |
| Input Voltage (on) | Vi(on) | 2.5 | 2 | Vdc | VCE = 0.3 V, IC = 20 mA | 4 | |
| Output Voltage (on) | VOL | 0.2 | Vdc | VCC = 5.0 V, VB = 2.5 V, RL = 1.0 k | 4 | ||
| Output Voltage (off) | VOH | 4.9 | Vdc | VCC = 5.0 V, VB = 0.25 V, RL = 1.0 k | 4 | ||
| Input Resistor R1 | R1 | 3.3 | 4.7 | 6.1 | k | 4 | |
| Resistor Ratio R1/R2 | R1/R2 | 0.8 | 1 | 1.2 | 4 | ||
| Total Device Dissipation (SOT−23, MMUN2232L) | PD | 246 | mW | TA = 25°C; Note 1: FR−4 @ Minimum Pad | 3 | ||
| Total Device Dissipation (SOT−23, MMUN2232L) | PD | 400 | mW | TA = 25°C; Note 2: FR−4 @ 1.0 x 1.0 Inch Pad | 3 | ||
| Derate above 25°C (SOT−23, MMUN2232L) | 2 | mW/°C | Note 1: FR−4 @ Minimum Pad | 3 | |||
| Derate above 25°C (SOT−23, MMUN2232L) | 3.2 | mW/°C | Note 2: FR−4 @ 1.0 x 1.0 Inch Pad | 3 | |||
| Thermal Resistance, Junction to Ambient (SOT−23, MMUN2232L) | RJA | 508 | °C/W | Note 1: FR−4 @ Minimum Pad | 3 | ||
| Thermal Resistance, Junction to Ambient (SOT−23, MMUN2232L) | RJA | 311 | °C/W | Note 2: FR−4 @ 1.0 x 1.0 Inch Pad | 3 | ||
| Thermal Resistance, Junction to Lead (SOT−23, MMUN2232L) | RJL | 174 | °C/W | Note 1: FR−4 @ Minimum Pad | 3 | ||
| Thermal Resistance, Junction to Lead (SOT−23, MMUN2232L) | RJL | 208 | °C/W | Note 2: FR−4 @ 1.0 x 1.0 Inch Pad | 3 | ||
| Junction and Storage Temperature Range (SOT−23, MMUN2232L) | TJ, Tstg | -55 | 150 | °C | 3 | ||
| Input Resistor R2 (nominal, from title) | R2 | 4.7 | k | 1 |
CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol:
NSVMMUN2232LT1G - Footprint:
Package_TO_SOT_SMD:SOT-23 - 3D model: SOT-23, generated on the KiCad land (body 1.3 x 2.9 mm, terminals on the pads, 1.0 mm tall, datasheet A, nominal). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
nsvmmun2232lt1g-etched.step/nsvmmun2232lt1g-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);nsvmmun2232lt1g.step/nsvmmun2232lt1g.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: onsemi datasheet (13 pp, sha256
829670ed312faf9c, retrieved 2026-11-12, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).