component
NSVDTC123JM3T5G
Public Made by Adomby adom
onsemi Bipolar Transistors - BJT, SOT-723. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownNSVDTC123JM3T5G
onsemi · Bipolar Transistors - BJT · SOT-723
NSVDTC123JM3T5G from onsemi, in a SOT-723. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | BASE | input | Base (input) of the NPN BRT, connected through the integrated R1 = 2.2 kΩ series resistor, with input forward voltage max 12 Vdc and input reverse voltage max 6 Vdc. |
| 2 | EMITTER | power_in | Emitter (ground) of the NPN BRT, connected to the base-emitter resistor R2 (R1/R2 = 0.047 typ). |
| 3 | COLLECTOR | output | Collector (output) of the NPN BRT, rated VCEO 50 Vdc and IC 100 mAdc continuous. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | onsemi |
| Package | SOT-723 |
| Category | Triode/MOS Tube/Transistor |
| Pins | 3 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Collector-Base Cutoff Current | ICBO | 100 | nAdc | VCB = 50 V, IE = 0 | 4 | ||
| Collector-Emitter Cutoff Current | ICEO | 500 | nAdc | VCE = 50 V, IB = 0 | 4 | ||
| Emitter-Base Cutoff Current | IEBO | 0.2 | mAdc | VEB = 6.0 V, IC = 0 | 4 | ||
| Collector-Base Breakdown Voltage | V(BR)CBO | 50 | Vdc | IC = 10 µA, IE = 0 | 4 | ||
| Collector-Emitter Breakdown Voltage | V(BR)CEO | 50 | Vdc | IC = 2.0 mA, IB = 0 | 4 | ||
| DC Current Gain | hFE | 80 | 140 | IC = 5.0 mA, VCE = 10 V | 4 | ||
| Collector Emitter Saturation Voltage | VCE(sat) | 0.25 | Vdc | IC = 10 mA, IB = 1.0 mA | 4 | ||
| Input Voltage (off) | Vi(off) | 0.6 | 0.5 | Vdc | VCE = 5.0 V, IC = 100 µA | 4 | |
| Input Voltage (on) | Vi(on) | 1.1 | 0.8 | Vdc | VCE = 0.3 V, IC = 5.0 mA | 4 | |
| Output Voltage (on) | VOL | 0.2 | Vdc | VCC = 5.0 V, VB = 2.5 V, RL = 1.0 kΩ | 4 | ||
| Output Voltage (off) | VOH | 4.9 | Vdc | VCC = 5.0 V, VB = 0.5 V, RL = 1.0 kΩ | 4 | ||
| Input Resistor | R1 | 1.5 | 2.2 | 2.9 | kΩ | 4 | |
| Resistor Ratio | R1/R2 | 0.038 | 0.047 | 0.056 | 4 | ||
| Collector-Base Voltage | VCBO | 50 | Vdc | TA = 25°C | 1 | ||
| Collector-Emitter Voltage | VCEO | 50 | Vdc | TA = 25°C | 1 | ||
| Collector Current - Continuous | IC | 100 | mAdc | TA = 25°C | 1 | ||
| Input Forward Voltage | VIN(fwd) | 12 | Vdc | TA = 25°C | 1 | ||
| Input Reverse Voltage | VIN(rev) | 6 | Vdc | TA = 25°C | 1 | ||
| Total Device Dissipation (SOT-723, Note 1) | PD | 260 | mW | TA = 25°C, FR-4 @ Minimum Pad | 3 | ||
| Total Device Dissipation (SOT-723, Note 2) | PD | 600 | mW | TA = 25°C, FR-4 @ 1.0 x 1.0 Inch Pad | 3 | ||
| Derate above 25°C (SOT-723, Note 1) | PD | 2 | mW/°C | FR-4 @ Minimum Pad | 3 | ||
| Derate above 25°C (SOT-723, Note 2) | PD | 4.8 | mW/°C | FR-4 @ 1.0 x 1.0 Inch Pad | 3 | ||
| Thermal Resistance, Junction to Ambient (Note 1) | RθJA | 480 | °C/W | FR-4 @ Minimum Pad | 3 | ||
| Thermal Resistance, Junction to Ambient (Note 2) | RθJA | 205 | °C/W | FR-4 @ 1.0 x 1.0 Inch Pad | 3 | ||
| Junction and Storage Temperature Range | TJ, Tstg | -55 | 150 | °C | 3 |
CAD (KiCad official)
- Symbol:
NSVDTC123JM3T5G - Footprint:
Package_TO_SOT_SMD:SOT-723 - 3D model: SOT-723, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 0.5 mm nominal SOT-723 height). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions are nominal, not the manufacturer's CAD (STEP)
- 3D model files:
nsvdtc123jm3t5g-etched.step/nsvdtc123jm3t5g-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);nsvdtc123jm3t5g.step/nsvdtc123jm3t5g.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: onsemi datasheet (13 pp, sha256
f52a39a924265e8a, retrieved 2026-10-22, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).