main
Ray
Publish 0.1.0
0dddd93
NSPGD1F004RT03
NOVOSENSE · Pressure Sensors · DIP-8
NSPGD1F004RT03 from NOVOSENSE, in a DIP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NC | unconnected | Not connected (floating). |
| 2 | VDD | power_in | Power supply input, 3V to 5.5V recommended for analog voltage output (absolute maximum 6.5V). |
| 3 | GND | power_in | Ground. |
| 4 | VOUT/FREQ | output | Analog voltage output (ratiometric 0.2VDD to 0.984VDD for this part) or frequency output on other variants; drive load of at least 1 kΩ and up to 15 nF. |
| 5 | NC | unconnected | Not connected (floating). |
| 6 | NC | unconnected | Not connected (floating). |
| 7 | NC | unconnected | Not connected (floating). |
| 8 | NC | unconnected | Not connected (floating). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | NOVOSENSE |
| Package | DIP-8 |
| Category | Sensors |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Accuracy at 25°C | ACC | -1 | 1 | %F.S. | @25°C | 5 | |
| Accuracy 0~70°C analog/I2C | ACC | -1.5 | 1.5 | %F.S. | 0~70°C 模拟电压、数字I2C输出 | 5 | |
| Supply voltage | VDD | 3 | 5 | 5.5 | V | 模拟电压、数字I2C输出 | 4 |
| Operating pressure | Pamb | -10 | 10 | kPa | 4 | ||
| Operating temperature | Topr | 0 | 70 | °C | 4 | ||
| Supply voltage absolute max | VDDmax | -0.3 | 6.5 | V | 4 | ||
| Analog pin voltage | -0.3 | V | max VDD+0.3 V | 4 | |||
| Analog pin current | 25 | mA | 4 | ||||
| Storage temperature | Tstg | -30 | 85 | °C | 4 | ||
| ESD HBM | HBM | 2 | kV | 4 | |||
| Output load resistance | Rload | 1 | kΩ | 电压输出模式 | 5 | ||
| Output load capacitance | Cload | 15 | nF | 电压输出模式 | 5 | ||
| PSRR | PSRR | 90 | 120 | dB | 5 | ||
| EEPROM data retention | Tlive | 10 | a | @125°C | 5 | ||
| I2C clock frequency | fscl | 400 | kHz | 5 | |||
| Clock low time | tLOW | 1.3 | µs | 5 | |||
| Clock high time | tHIGH | 0.6 | µs | 5 | |||
| SDA setup time | tSUDAT | 0.1 | µs | 5 | |||
| SDA hold time | tHDDAT | 0 | µs | 5 | |||
| Start setup time | tSUSTA | 0.6 | µs | 5 | |||
| Start hold time | tHDSTA | 0.6 | µs | 5 | |||
| Stop setup time | tSUSTO | 0.6 | µs | 5 | |||
| Bus free time between communications | tBUF | 1.3 | µs | 5 |
CAD (KiCad official)
- Symbol:
NSPGD1F004RT03 - Footprint:
Package_DIP:DIP-8_W7.62mm - 3D model: DIP-8 (KiCad packages3D, STEP)
- 3D model files:
nspgd1f004rt03-etched.step/nspgd1f004rt03-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);nspgd1f004rt03.step/nspgd1f004rt03.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: NOVOSENSE datasheet (17 pp, sha256
998ccf21d536d90b, retrieved 2026-10-27, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# NSPGD1F004RT03
**NOVOSENSE** · Pressure Sensors · DIP-8
NSPGD1F004RT03 from NOVOSENSE, in a DIP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NC | unconnected | Not connected (floating). |
| 2 | VDD | power_in | Power supply input, 3V to 5.5V recommended for analog voltage output (absolute maximum 6.5V). |
| 3 | GND | power_in | Ground. |
| 4 | VOUT/FREQ | output | Analog voltage output (ratiometric 0.2*VDD to 0.984*VDD for this part) or frequency output on other variants; drive load of at least 1 kΩ and up to 15 nF. |
| 5 | NC | unconnected | Not connected (floating). |
| 6 | NC | unconnected | Not connected (floating). |
| 7 | NC | unconnected | Not connected (floating). |
| 8 | NC | unconnected | Not connected (floating). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | NOVOSENSE |
| Package | DIP-8 |
| Category | Sensors |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Accuracy at 25°C | ACC | -1 | | 1 | %F.S. | @25°C | 5 |
| Accuracy 0~70°C analog/I2C | ACC | -1.5 | | 1.5 | %F.S. | 0~70°C 模拟电压、数字I2C输出 | 5 |
| Supply voltage | VDD | 3 | 5 | 5.5 | V | 模拟电压、数字I2C输出 | 4 |
| Operating pressure | Pamb | -10 | | 10 | kPa | | 4 |
| Operating temperature | Topr | 0 | | 70 | °C | | 4 |
| Supply voltage absolute max | VDDmax | -0.3 | | 6.5 | V | | 4 |
| Analog pin voltage | | -0.3 | | | V | max VDD+0.3 V | 4 |
| Analog pin current | | | | 25 | mA | | 4 |
| Storage temperature | Tstg | -30 | | 85 | °C | | 4 |
| ESD HBM | HBM | | | 2 | kV | | 4 |
| Output load resistance | Rload | 1 | | | kΩ | 电压输出模式 | 5 |
| Output load capacitance | Cload | | | 15 | nF | 电压输出模式 | 5 |
| PSRR | PSRR | 90 | 120 | | dB | | 5 |
| EEPROM data retention | Tlive | 10 | | | a | @125°C | 5 |
| I2C clock frequency | fscl | | | 400 | kHz | | 5 |
| Clock low time | tLOW | 1.3 | | | µs | | 5 |
| Clock high time | tHIGH | 0.6 | | | µs | | 5 |
| SDA setup time | tSUDAT | 0.1 | | | µs | | 5 |
| SDA hold time | tHDDAT | 0 | | | µs | | 5 |
| Start setup time | tSUSTA | 0.6 | | | µs | | 5 |
| Start hold time | tHDSTA | 0.6 | | | µs | | 5 |
| Stop setup time | tSUSTO | 0.6 | | | µs | | 5 |
| Bus free time between communications | tBUF | 1.3 | | | µs | | 5 |
## CAD (KiCad official)
- Symbol: `NSPGD1F004RT03`
- Footprint: `Package_DIP:DIP-8_W7.62mm`
- 3D model: DIP-8 (KiCad packages3D, STEP)
- 3D model files: `nspgd1f004rt03-etched.step` / `nspgd1f004rt03-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `nspgd1f004rt03.step` / `nspgd1f004rt03.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [NOVOSENSE datasheet](docs/nspgd1f004rt03-datasheet.pdf) (17 pp, sha256 `998ccf21d536d90b`, retrieved 2026-10-27, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/nspgd1f004rt03-datasheet.pdf)