component
NSPAS1N115RR01
Public Made by Adomby adom
NOVOSENSE Pressure Sensors, SOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownNSPAS1N115RR01
NOVOSENSE · Pressure Sensors · SOP-8
NSPAS1N115RR01 from NOVOSENSE, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Ground. |
| 2 | NC | unconnected | No connection (floating). |
| 3 | VOUT | output | Analog voltage output; output range 0.01 V to 4.99 V, absolute maximum -0.3 V to 5.3 V, drives load of min 1 kOhm and max 150 nF. |
| 4 | NC | unconnected | No connection (floating). |
| 5 | NC | unconnected | No connection (floating). |
| 6 | VDDHV | power_in | Supply input with overvoltage protection; recommended 4.5 V to 5.5 V, absolute maximum -24 V to 28 V (1 hour at 70 °C). |
| 7 | NC | unconnected | No connection (floating). |
| 8 | NC | unconnected | No connection (floating). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | NOVOSENSE |
| Package | SOP-8 |
| Category | Sensors |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VDDHV voltage (abs max, 1 hour) | VDDHV | -24 | 28 | V | 70℃, 1 hour | 4 | |
| VDDHV voltage (abs max, 1 minute) | VDDHV | -30 | 36 | V | 70℃, 1 minute | 4 | |
| Analog pin voltage | VOUT | -0.3 | 5.3 | V | 25℃, VDDHV>5V | 4 | |
| Analog pin current | 25 | mA | 4 | ||||
| Proof pressure | Pproof | 600 | kPa | 4 | |||
| Burst pressure | Pburst | 800 | kPa | 4 | |||
| ESD HBM | HBM | -2 | 2 | kV | 4 | ||
| ESD CDM | CDM | -500 | 500 | V | 4 | ||
| Storage temperature | Tstg | -40 | 150 | ℃ | 4 | ||
| VDDHV supply voltage | VDDHV | 4.5 | 5 | 5.5 | V | 4 | |
| Operating pressure | Pamb | 10 | 400 | kPa | 4 | ||
| Operating temperature | Topr | -40 | 125 | ℃ | 4 | ||
| Output voltage range | VOUT | 0.01 | 4.99 | V | 5 | ||
| Output pressure accuracy | AccP | -1 | 1 | %F.S. | @0℃~85℃ | 5 | |
| Output pressure accuracy | AccP | -1.5 | 1.5 | %F.S. | @-40℃~125℃ | 5 | |
| Short-circuit current limit | Ishort_lmt | 10 | 25 | mA | 输出短路到VDDHV或GND | 5 | |
| Output load resistance | Rload | 1 | kOhm | 5 | |||
| Output load capacitance | Cload | 150 | nF | 5 | |||
| Upper clamp voltage | Vclamph | 50 | 100 | %VDDHV | 5 | ||
| Lower clamp voltage | Vclampl | 0 | 50 | %VDDHV | 5 | ||
| Clamp voltage error | ΔVclamp | -40 | 40 | mV | @VDDHV=5V | 5 | |
| Power-up time | TUP | 10 | ms | 5 | |||
| Step response time | TRESP | 0.8 | ms | 5 | |||
| EEPROM data retention | Tlive | 10 | years | @125℃ | 5 | ||
| Ratiometric output error at VDDHVMIN/VDDHVMAX | ERAT | -0.5 | 0.5 | % | @ VDDHVTYP; at VDDHVMIN and VDDHVMAX | 7 | |
| Power-on reset | VDDHVPOR | 2.5 | V | 5 | |||
| Typical operating current | Iavdd | 3.1 | mA | 5 | |||
| Output voltage noise | Vrms | 0.5 | mV | 5 |
CAD (KiCad official)
- Symbol:
NSPAS1N115RR01 - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
nspas1n115rr01-etched.step/nspas1n115rr01-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);nspas1n115rr01.step/nspas1n115rr01.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: NOVOSENSE datasheet (14 pp, sha256
e8f9558af0022b75, retrieved 2026-10-22, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).