main
Ray
Publish 0.1.0
403f596
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241
{
"slug": "nsi8242w0-q1swr",
"version": "0.1.0",
"type": "component",
"description": "NOVOSENSE Digital Isolators, SOP-16-300mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
"tags": [
"component",
"communication interface chip-uart-485-232",
"nsi8242w0-q1swr",
"factory-2.0.0",
"extractor-text"
],
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"nsi8242w0-q1swr.kicad_sym",
"nsi8242w0-q1swr.kicad_mod",
"nsi8242w0-q1swr.glb",
"nsi8242w0-q1swr.step",
"nsi8242w0-q1swr.lbr",
"docs/hero.png",
"docs/nsi8242w0-q1swr-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html",
"nsi8242w0-q1swr-hero.glb",
"nsi8242w0-q1swr-hero.overlay.json"
],
"component": {
"mpn": "NSi8242W0-Q1SWR",
"manufacturer": "NOVOSENSE",
"package": "SOP-16-300mil",
"pin_count": 16,
"category": "Communication Interface Chip/UART/485/232",
"subcategory": "Digital Isolators",
"datasheet": "https://datasheet.lcsc.com/datasheet/pdf/9111fe9eb530997ac98f1529b2417c99.pdf",
"parts": {
"symbol": "nsi8242w0-q1swr.kicad_sym",
"footprint": "nsi8242w0-q1swr.kicad_mod",
"model_3d": "nsi8242w0-q1swr-hero.glb",
"model_3d_plain": "nsi8242w0-q1swr.glb",
"model_3d_step": "nsi8242w0-q1swr-etched.step",
"model_3d_step_plain": "nsi8242w0-q1swr.step",
"lbr": "nsi8242w0-q1swr.lbr"
},
"distributor_links": {
"lcsc": "C5136778",
"digikey": "5380-NSI8242W0-Q1SWRTR-ND"
},
"distributor_check": {
"checked_at": "2026-11-20T22:42:41Z",
"source": "Component Ocean /api/assign-pns",
"digikey": {
"pn": "5380-NSI8242W0-Q1SWRTR-ND",
"status": "found"
},
"mouser": {
"pn": null,
"status": "quota"
}
},
"pins": [
{
"number": "1",
"name": "VDD1",
"type": "power_in",
"description": "Power supply for isolator side 1, with a recommended supply range of 2.5V to 5.5V."
},
{
"number": "2",
"name": "GND1",
"type": "power_in",
"description": "Ground 1, the ground reference for isolator side 1."
},
{
"number": "3",
"name": "INA",
"type": "input",
"description": "Logic input A on side 1."
},
{
"number": "4",
"name": "INB",
"type": "input",
"description": "Logic input B on side 1."
},
{
"number": "5",
"name": "OUTC",
"type": "output",
"description": "Logic output C on side 2, with an output impedance of approximately 50 ohm."
},
{
"number": "6",
"name": "OUTD",
"type": "output",
"description": "Logic output D on side 2, with an output impedance of approximately 50 ohm."
},
{
"number": "7",
"name": "NC/EN1",
"type": "input",
"description": "No connection, or output enable 1: an active-high input where side 1 output is enabled when EN1 is high or NC and set to high impedance when EN1 is low."
},
{
"number": "8",
"name": "GND1",
"type": "power_in",
"description": "Ground 1, the ground reference for isolator side 1."
},
{
"number": "9",
"name": "GND2",
"type": "power_in",
"description": "Ground 2, the ground reference for isolator side 2."
},
{
"number": "10",
"name": "EN2",
"type": "input",
"description": "Output enable 2: an active-high input where side 2 output is enabled when EN2 is high or NC and set to high impedance when EN2 is low."
},
{
"number": "11",
"name": "IND",
"type": "input",
"description": "Logic input D on side 1."
},
{
"number": "12",
"name": "INC",
"type": "input",
"description": "Logic input C on side 1."
},
{
"number": "13",
"name": "OUTB",
"type": "output",
"description": "Logic output B on side 2, with an output impedance of approximately 50 ohm."
},
{
"number": "14",
"name": "OUTA",
"type": "output",
"description": "Logic output A on side 2, with an output impedance of approximately 50 ohm."
},
{
"number": "15",
"name": "GND2",
"type": "power_in",
"description": "Ground 2, the ground reference for isolator side 2."
},
{
"number": "16",
"name": "VDD2",
"type": "power_in",
"description": "Power supply for isolator side 2, with a recommended supply range of 2.5V to 5.5V."
}
],
"provenance": {
"extractor": "extract_pins 0.3",
"factory_chain": {
"factory": "2.0.0",
"extractor": "extract_pins 0.3",
"primary_model": "claude-haiku-5-5",
"primary_mode": "text",
"consensus_model": "claude-sonnet-5-5",
"consensus": "agreed",
"guards": "pin_guards 0.1: passed",
"guard_notes": [
"extractor flagged: Table 1.1 gives the NSi8242 column for pins 5, 6, 11 and 12 as a cross-mapped set, so the pin number; Pin 7 is printed as NC or EN1, and the Part Number Rule says Pin 7 and Pin 14 are B=NC, NA=EN. The M; The datasheet gives no electrical spec headline for this part beyond the pinout, so no spec section "
],
"pages_sent": 31,
"cost_usd": 0.0329,
"at": "2026-11-20T22:42:33"
},
"datasheet": {
"url": "https://datasheet.lcsc.com/datasheet/pdf/9111fe9eb530997ac98f1529b2417c99.pdf",
"pages": 31,
"sha256": "6a248adae188813c",
"source_tier": "lcsc",
"citation": "NOVOSENSE datasheet, copy hosted by LCSC"
},
"cad": "KiCad official (CC-BY-SA 4.0)",
"pins": {
"total": 16,
"described": 16,
"cites_pages": true,
"refuses_to_fabricate": true
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"models_3d": [
{
"file": "nsi8242w0-q1swr.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
10.3,
10.3,
2.75
],
"zmin_mm": -0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "159663ceb2b4996b1b89d3111e4a355fc27de3e24d3570f50e5ed9086e0d73af",
"checked": "2026-11-20",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "nsi8242w0-q1swr-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
10.3,
10.3,
2.75
],
"zmin_mm": -0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "e66280699a1ecd96770a6552806e2f80a194e5235575871ab2165e549ba9889c",
"checked": "2026-11-20",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
]
}
}