NSI8210N0-DSPR

{
 "schema": "adom/verification@1",
 "part": "NSI8210N0-DSPR",
 "variants": [],
 "entries": [
  {
   "date": "2026-10-08",
   "by": {
    "name": "Claude (AI build)",
    "handle": "claude"
   },
   "status": "superseded",
   "title": "Automated build checks (awaiting human validation)",
   "scope": [
    "symbol",
    "footprint",
    "3d",
    "pins"
   ],
   "variants": [
    "*"
   ],
   "checks": [
    {
     "text": "Footprint extracted pad-for-pad from the source board and normalized to the footprint frame (back-side parts un-mirrored)",
     "result": "pass"
    },
    {
     "text": "3D model seated z=0 at footprint origin (placement inverse; method centroid-matched to KiCad library models on 59 cases)",
     "result": "pass"
    },
    {
     "text": "adom-lbr generate + lint passed",
     "result": "pass"
    },
    {
     "text": "8 of 8 pins described from the datasheet (adom-ds2sf, page-cited)",
     "result": "pass"
    },
    {
     "text": "Not yet checked by a person: land pattern vs datasheet, pin-1/orientation, 3D body vs drawing",
     "result": "note"
    }
   ],
   "evidence": [
    {
     "label": "datasheet",
     "href": "docs/nsi8210n0-dspr-datasheet.pdf"
    }
   ],
   "files": {
    "nsi8210n0-dspr.kicad_sym": "4a9f4f8eead32f1d3ee02d26c5ca00804b61210f1ead3016a9cb3b3cbc8d9e15",
    "nsi8210n0-dspr.kicad_mod": "176358aa6ed22bb4d9c1b38c51c33cd56cf8adabf91137cc21550303b9787aa7",
    "nsi8210n0-dspr.step": "05ea67aabcf66c324e1029149c5de1ea56efca7838b9c7ed0f0f9982f4625abf"
   }
  },
  {
   "date": "2026-10-08",
   "by": {
    "name": "Claude (AI build)",
    "handle": "claude"
   },
   "status": "superseded",
   "title": "Source symbol carries leftover keywords/filters from another part (ki_keywords \"MCP1725-AD...",
   "scope": [
    "review"
   ],
   "variants": [
    "*"
   ],
   "checks": [
    {
     "text": "Source symbol carries leftover keywords/filters from another part (ki_keywords \"MCP1725-ADJE/MC\", DFN8 fp filters); cleaned on this page.",
     "result": "note"
    }
   ],
   "evidence": [],
   "files": {}
  },
  {
   "date": "2026-10-08",
   "by": {
    "name": "Claude (AI build)",
    "handle": "claude"
   },
   "status": "superseded",
   "title": "Source footprint is Package_SO:SSOP-8_3.9x5.05mm_P1.27mm while LCSC lists SOP-8-150mil; co...",
   "scope": [
    "review"
   ],
   "variants": [
    "*"
   ],
   "checks": [
    {
     "text": "Source footprint is Package_SO:SSOP-8_3.9x5.05mm_P1.27mm while LCSC lists SOP-8-150mil; confirm the land pattern against the datasheet package drawing.",
     "result": "note"
    }
   ],
   "evidence": [],
   "files": {}
  },
  {
   "date": "2026-10-27",
   "by": {
    "name": "Claude, at Caleb Taylor's request",
    "handle": "claude"
   },
   "status": "verified",
   "title": "Validated against NOVOSENSE's NSI8210 datasheet (EN) 2.0, 2025/11/25",
   "scope": [
    "symbol",
    "footprint",
    "3d",
    "pins"
   ],
   "variants": [
    "*"
   ],
   "checks": [
    {
     "text": "Datasheet: replaced the LCSC copy (Datasheet (EN) 1.2, 2022) with NOVOSENSE's current edition, Datasheet (EN) 2.0 dated 2025/11/25, downloaded from novosns.com (the file linked from the NSI8210N0-DSPR product page, which lists the part as Active)",
     "result": "pass"
    },
    {
     "text": "All 8 pins match Table 1.1 and Figure 1.1 (p.3) by number and name: 1 VDD1, 2 IN, 3 VDD1, 4 GND1, 5 GND2, 6 OUT, 7 NC, 8 VDD2. No renames needed",
     "result": "pass"
    },
    {
     "text": "Pin types set from Table 1.1 (all were 'unspecified'): VDD1/VDD2/GND1/GND2 power_in, IN input, OUT output, NC no_connect",
     "result": "pass"
    },
    {
     "text": "Descriptions rewritten from Table 1.1 (p.3), recommended operating conditions (p.4-5), electrical characteristics (p.5), Table 8.1 fail-safe output (p.19) and the PCB layout section (p.21); the earlier text's TTL input thresholds (VIH 2 V, VIL 0.8 V) and 5000 Vrms figure did not match this edition or this 3.75 kV part (p.5, p.25) and were removed",
     "result": "pass"
    },
    {
     "text": "Footprint vs Figure 10.2 SOP8 land pattern (p.23): 8 pads 1.55 x 0.60 mm, as drawn; pitch 1.27 mm; pad centres 5.35 mm apart vs the drawing's 5.4 mm (0.05 mm narrower), pads span x 1.90 to 3.45 mm from centre and cover the feet (lead tips at E/2 = 2.90-3.10 mm, L 0.40-1.00 mm); pad width 0.60 over b 0.33-0.49; no exposed pad; pin 1 top-left as Figure 1.1",
     "result": "note"
    },
    {
     "text": "3D body (plain STEP) 6.00 x 5.05 x 1.75 mm against E 5.80-6.20, D 4.80-5.00, A 1.75 max (Figure 10.1, p.23): E and A in range; the model's 5.05 mm length is 0.05 mm over D max, which excludes mold flash and protrusions of up to 0.15 mm per side (envelope up to 5.30 mm). Leads 0.44 mm wide on 1.27 mm pitch; pin-1 dot top-left over pad 1; Z-up, seated on z = 0, centred on the pads",
     "result": "note"
    },
    {
     "text": "DigiKey and Mouser do not list the part: searched NSI8210N0-DSPR (2026-10-08) and NSI8210 (2026-10-27); LCSC C2987924 kept",
     "result": "pass"
    },
    {
     "text": "Symbol and footprint Datasheet properties point at the manufacturer datasheet URL",
     "result": "pass"
    },
    {
     "text": "Symbol Datasheet / MPN / Manufacturer / DigiKey / Mouser / LCSC properties agree with page.json; footprint Datasheet property points at the manufacturer datasheet URL",
     "result": "pass"
    },
    {
     "text": "component-page-verify: all checks pass",
     "result": "pass"
    }
   ],
   "evidence": [
    {
     "label": "datasheet (NOVOSENSE, EN 2.0)",
     "href": "https://www.novosns.com/dms/userfiles/docs/QXfdb5HnFoZWprx7hgScrLmXnQc.pdf"
    },
    {
     "label": "product page (NOVOSENSE)",
     "href": "https://www.novosns.com/en/product/NSI8210N0-DSPR"
    }
   ],
   "files": {
    "nsi8210n0-dspr.kicad_sym": "24ecc955c7b42727606949c7f589908bcea7e5d5638b54006c4df468c9ddfa50",
    "nsi8210n0-dspr.kicad_mod": "f9f398e62d800753b833032e5e44ddfa2ad6ea9eea31f522b45c4b8d28d0e78e",
    "nsi8210n0-dspr.step": "05ea67aabcf66c324e1029149c5de1ea56efca7838b9c7ed0f0f9982f4625abf"
   }
  }
 ]
}