3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownNSI45035JZT1G
onsemi · LED Drivers · SOT-223-4
NSI45035JZT1G from onsemi, in a SOT-223-4. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Anode | passive | Anode terminal of the constant current regulator, with an anode-cathode voltage rating of 45 V maximum (Vak Max 45 V). |
| 2 | Cathode | passive | Cathode terminal, tied internally to pin 4 and the tab, that sets the regulated Ireg(SS) of 35 mA typical (29.75 to 40.25 mA) at Vak = 7.5 V. |
| 3 | Radj | passive | Adjustment pin: a resistor between Radj and the Cathode raises Ireg(SS) toward 70 mA, and the pin may be left open (No Connect) if no adjustment is required. |
| 4 | Cathode | passive | Cathode terminal (also the tab), used as the reference for the Radj resistor, with the same current regulation as pin 2. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | onsemi |
| Package | SOT-223-4 |
| Category | Display Modules / LED Drivers / Display Drivers |
| Pins | 4 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Steady State Current | Ireg(SS) | 29.75 | 35 | 40.25 | mA | @ Vak = 7.5 V (Note 1) | 2 |
| Pulse Current | Ireg(P) | 30.9 | 42.5 | mA | @ Vak = 7.5 V (Note 3); pulse width t ≤ 1.0 msec | 2 | |
| Voltage Overhead | Voverhead | 1.8 | V | Note 2: typical value for 75% Ireg(SS) | 2 | ||
| Capacitance | C | 7.4 | pF | @ Vak = 7.5 V (Note 4); f = 1 MHz, 0.02 V RMS | 2 | ||
| Capacitance | C | 31 | pF | @ Vak = 0 V (Note 4); f = 1 MHz, 0.02 V RMS | 2 | ||
| Anode-Cathode Voltage | Vak | 45 | V | 2 | |||
| Reverse Voltage | VR | 500 | mV | 2 | |||
| Operating and Storage Junction Temperature Range | TJ, Tstg | -55 | 150 | °C | 2 | ||
| Total Device Dissipation | PD | 1008 | mW | TA = 25°C; FR-4 @ 300 mm2, 1 oz. copper, still air (Note 5) | 2 | ||
| Derate above 25°C | PD | 8.06 | mW/°C | Note 5: FR-4 @ 300 mm2, 1 oz. copper, still air | 2 | ||
| Thermal Resistance, Junction-to-Ambient | RθJA | 124 | °C/W | Note 5: FR-4 @ 300 mm2, 1 oz. copper, still air | 2 | ||
| Thermal Reference, Junction-to-Lead 4 | RψJL4 | 33.3 | °C/W | Note 5: FR-4 @ 300 mm2, 1 oz. copper, still air | 2 | ||
| Total Device Dissipation | PD | 1136 | mW | TA = 25°C; FR-4 @ 300 mm2, 2 oz. copper, still air (Note 6) | 2 | ||
| Derate above 25°C | PD | 9.09 | mW/°C | Note 6: FR-4 @ 300 mm2, 2 oz. copper, still air | 2 | ||
| Thermal Resistance, Junction-to-Ambient | RθJA | 110 | °C/W | Note 6: FR-4 @ 300 mm2, 2 oz. copper, still air | 2 | ||
| Total Device Dissipation | PD | 1238 | mW | TA = 25°C; FR-4 @ 500 mm2, 1 oz. copper, still air (Note 7) | 2 | ||
| Derate above 25°C | PD | 9.9 | mW/°C | Note 7: FR-4 @ 500 mm2, 1 oz. copper, still air | 2 | ||
| Thermal Resistance, Junction-to-Ambient | RθJA | 101 | °C/W | Note 7: FR-4 @ 500 mm2, 1 oz. copper, still air | 2 | ||
| Thermal Reference, Junction-to-Lead 4 | RψJL4 | 33.7 | °C/W | Note 7: FR-4 @ 500 mm2, 1 oz. copper, still air | 2 | ||
| Total Device Dissipation | PD | 1420 | mW | TA = 25°C; FR-4 @ 500 mm2, 2 oz. copper, still air (Note 8) | 2 | ||
| Derate above 25°C | PD | 11.36 | mW/°C | Note 8: FR-4 @ 500 mm2, 2 oz. copper, still air | 2 | ||
| Thermal Resistance, Junction-to-Ambient | RθJA | 88 | °C/W | Note 8: FR-4 @ 500 mm2, 2 oz. copper, still air | 2 | ||
| Thermal Reference, Junction-to-Lead 4 | RψJL4 | 32.1 | °C/W | Note 8: FR-4 @ 500 mm2, 2 oz. copper, still air | 2 | ||
| Total Device Dissipation | PD | 1316 | mW | TA = 25°C; FR-4 @ 700 mm2, 1 oz. copper, still air (Note 9) | 2 | ||
| Derate above 25°C | PD | 10.53 | mW/°C | Note 9: FR-4 @ 700 mm2, 1 oz. copper, still air | 2 | ||
| Thermal Resistance, Junction-to-Ambient | RθJA | 95 | °C/W | Note 9: FR-4 @ 700 mm2, 1 oz. copper, still air | 2 | ||
| Thermal Reference, Junction-to-Lead 4 | RψJL4 | 32.4 | °C/W | Note 9: FR-4 @ 700 mm2, 1 oz. copper, still air | 2 | ||
| Total Device Dissipation | PD | 1506 | mW | TA = 25°C; FR-4 @ 700 mm2, 2 oz. copper, still air (Note 10) | 2 | ||
| Derate above 25°C | PD | 12.05 | mW/°C | Note 10: FR-4 @ 700 mm2, 2 oz. copper, still air | 2 | ||
| Thermal Resistance, Junction-to-Ambient | RθJA | 83 | °C/W | Note 10: FR-4 @ 700 mm2, 2 oz. copper, still air | 2 | ||
| Thermal Reference, Junction-to-Lead 4 | RψJL4 | 30.8 | °C/W | Note 10: FR-4 @ 700 mm2, 2 oz. copper, still air | 2 |
CAD (KiCad official)
- Symbol:
NSI45035JZT1G - Footprint:
Package_TO_SOT_SMD:SOT-223 - 3D model: SOT-223-4 (KiCad packages3D, STEP)
- 3D model files:
nsi45035jzt1g-etched.step/nsi45035jzt1g-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);nsi45035jzt1g.step/nsi45035jzt1g.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: onsemi datasheet (8 pp, sha256
5813ae1aa0cf39d7, retrieved 2026-10-27, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).