main
Ray Publish 0.1.0 e781f9b

NSI1306M25-DSWR

NOVOSENSE · RF Modulators / Demodulator · SOP-16-300mil

NSI1306M25-DSWR from NOVOSENSE, in a SOP-16-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 NC unconnected Internally connected to AVDD; this pin can be left floating or tied to AVDD.
2 INP input Positive analog input; ±250mV is recommended for NSI1306M25 (±50mV for NSI1306M05).
3 INN input Negative analog input.
4 AGND power_in Analog ground reference.
5 NC unconnected Not internally connected; this pin can be left floating or tied to AVDD or AGND.
6 NC unconnected Not internally connected; this pin can be left floating or tied to AVDD or AGND.
7 AVDD power_in Power supply for the analog side, 3.0 V to 5.5 V.
8 AGND power_in Analog ground reference.
9 DGND power_in Digital ground reference.
10 NC unconnected Not internally connected; this pin can be left floating or tied to DVDD or DGND.
11 DOUT output Modulator data output.
12 NC unconnected Not internally connected; this pin can be left floating or tied to DVDD or DGND.
13 CLKIN input Modulator clock input, 5 to 21 MHz.
14 DVDD power_in Power supply for the digital side, 3.0 V to 5.5 V.
15 NC unconnected Not internally connected; this pin can be left floating or tied to DVDD or DGND.
16 DGND power_in Digital ground reference.

Key specifications

Parameter Value
Manufacturer NOVOSENSE
Package SOP-16-300mil
Category Radio Frequency Chip/Antenna
Pins 16

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Power Supply Voltage AVDD, DVDD -0.3 6.5 V 5
Analog Input Voltage INP, INN -6 V Printed AGND-6 (AGND = 0 V) to AVDD+0.5 V; max is supply-relative 5
Digital Input Voltage CLKIN -0.5 V Printed DGND-0.5 to DVDD+0.5 V; min referenced to DGND = 0 V 5
Digital Output Voltage DOUT -0.5 V Printed DGND-0.5 to DVDD+0.5 V; min referenced to DGND = 0 V 5
Output current per Output Pin Io -10 10 mA 5
Operating Temperature TOPR -40 125 ℃ 5
Junction Temperature TJ -40 150 ℃ 5
Storage Temperature TSTG -55 150 ℃ 5
Electrostatic discharge HBM HBM -2000 2000 V Human body model, per AEC-Q100-002-RevD 5
Electrostatic discharge CDM CDM -1000 1000 V Charged device model, per AEC-Q100-011-RevB 5
Analog Side Power Supply AVDD 3 5 5.5 V 5
Digital Side Power Supply DVDD 3 3.3 5.5 V 5
Differential input voltage before clipping output (M25) VClipping -320 320 mV NSI1306M25 5
Linear differential input full scale voltage (M25) VFSR -250 250 mV NSI1306M25 5
Operating common-mode input voltage (M25) VCM -0.16 0.8 V NSI1306M25 5
Operating Ambient Temperature TA -40 125 ℃ 5
Analog Side Under-voltage detection threshold voltage AVDDUV 1.8 2.3 2.7 V AVDD falling 8
Analog Side Supply Current IAVDD 11.4 15.1 mA 8
Digital Side Supply Current IDVDD 1.78 2.5 mA 8
Input bias current IIB -24 -18 -12 µA INP = INN = AGND, IIB = (IIBP + IIBN) / 2 8
Input bias current drift TCIIB -1 1 nA/℃ 8
Common-mode transient immunity CMTI 100 150 kV/μs 8
Differential nonlinearity DNL -0.99 0.99 LSB 8
Integral nonlinearity INL -4 1 4 LSB 8
Offset error EO -100 4.5 100 µV INP = INN = AGND 8
Offset error thermal drift TCEO -0.5 0.15 1.5 µV/℃ 8
Gain error EG -0.2 0.005 0.2 % 8
Gain error thermal drift TCEG -40 20 40 ppm/℃ 8
Signal to noise ratio SNR 82 86 dB fIN = 1kHz 9
Signal to noise and distortion SINAD 82 86 dB fIN = 1kHz 9
Total harmonic distortion THD -95 -85 dB fIN = 1kHz 9
Spurious-free dynamic range SFDR 83 100 dB fIN = 1kHz 9
Input current IIN 0 7 µA DGND ≤ VIN ≤ DVDD 9
Low-level input voltage VIL -0.3 V Printed upper limit 0.3×DVDD 9
Low-level output voltage (IOL = 20µA) VOL 0.1 V IOL = 20µA 9
Low-level output voltage (IOL = 4mA) VOL 0.4 V IOL = 4mA 9
CLKIN clock frequency fCLKIN 5 21 MHz 9
CLKIN clock period tCLKIN 47.6 200 ns 9
CLKIN clock high time tHIGH 20 25 120 ns 9
CLKIN clock low time tLOW 20 25 120 ns 9
DOUT rising time tr 5 ns CLOAD = 15pF 9
DOUT falling time tf 5 ns CLOAD = 15pF 9
DOUT hold time after rising edge of CLKIN tH 3.5 ns CLOAD = 15pF 9
Rising edge of CLKIN to DOUT valid delay tD 15 ns CLOAD = 15pF 9
Analog setting time tAS 0.5 ms AVDD step to 3.0 V with DVDD ≥ 3.0 V, to DOUT valid, 0.1% settling 9
Common-mode overvoltage detection level VCMov 0.9 V 8
Common-mode rejection ratio (DC) CMRRdc -106 dB INP = INN, fIN = 0 Hz, VCM min ≤ VIN ≤ VCM max 8
Common-mode rejection ratio (AC) CMRRac -104 dB INP = INN, fIN = 10 kHz, VCM min ≤ VIN ≤ VCM max 8
Single-ended input resistance RIN 19 kΩ INN = AGND 8
Differential input resistance RIND 22 kΩ 8
Input capacitance CI 2 pF 8
Power supply rejection ratio (DC) PSRR -100 dB PSRR vs AVDD, at DC 9
Power supply rejection ratio (100mV, 10kHz ripple) PSRR -90 dB PSRR vs AVDD, 100mV and 10kHz ripple 9
Input capacitance (digital) CIN 5 pF 9
Junction-to-ambient thermal resistance (SOP16) RθJA 82 ℃/W 5
Junction-to-case (top) thermal resistance (SOP16) RθJC(top) 42 ℃/W 6
Junction-to-board thermal resistance (SOP16) RθJB 46 ℃/W 6
Junction-to-top characterization parameter (SOP16) ΨJT 12 ℃/W 6
Junction-to-board characterization parameter (SOP16) ΨJB 46 ℃/W 6

CAD (KiCad official)

  • Symbol: NSI1306M25-DSWR
  • Footprint: Package_SO:SOIC-16W_7.5x12.8mm_P1.27mm
  • 3D model: SOP-16-300mil (KiCad packages3D, STEP)
  • 3D model files: nsi1306m25-dswr-etched.step / nsi1306m25-dswr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); nsi1306m25-dswr.step / nsi1306m25-dswr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: NOVOSENSE datasheet (26 pp, sha256 2a8af086877b20b6, retrieved 2026-11-13, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF