component
NSG3024
Public Made by Adomby adom
WXNSIC Gate Drivers, SOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownNSG3024
WXNSIC · Gate Drivers · SOP-8
NSG3024 from WXNSIC, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VCC | power_in | Low-side supply pin, recommended operating range 10 V to 20 V referenced to VSS, with an absolute maximum of 25 V. |
| 2 | IN | input | Logic input for both the high-side and low-side outputs, with VIH minimum 2.5 V and VIL maximum 0.8 V (VCC = 10 V to 20 V) and VIN limited to 0 V to VCC. |
| 3 | SD | input | Shutdown signal input with the same logic thresholds as IN (VIH minimum 2.5 V, VIL maximum 0.8 V), used to turn off the outputs. |
| 4 | VSS | power_in | Ground reference for the device; all voltage ratings in the datasheet are referenced to VSS. |
| 5 | LO | output | Low-side gate driver output, swinging between 0 V and VCC, with peak source current 0.6 A and peak sink current 1.1 A (PW ≤ 10 µs). |
| 6 | VS | power_in | High-side floating ground reference, recommended range -9 V to 300 V relative to VSS, with dVS/dt tolerance up to 50 V/ns. |
| 7 | HO | output | High-side gate driver output referenced to VS, swinging between VS and VB. |
| 8 | VB | power_in | High-side floating supply, recommended VS + 10 V to VS + 20 V, with an absolute maximum of 325 V referenced to VSS. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | WXNSIC |
| Package | SOP-8 |
| Category | Motor Driver ICs |
| Pins | 8 |
CAD (KiCad official)
- Symbol:
NSG3024 - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
nsg3024-etched.step/nsg3024-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);nsg3024.step/nsg3024.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: WXNSIC datasheet (9 pp, sha256
8c766e2d9872d845, retrieved 2026-10-09, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).