component
NSG27324P
Public Made by Adomby adom
WXNSIC Gate Drivers, DIP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
NSG27324P
WXNSIC · Gate Drivers · DIP-8
NSG27324P from WXNSIC, in a DIP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NC | unconnected | No-connect pin, listed as an empty pin in Table 7-1 and not assigned a function. |
| 2 | INA | input | Channel A logic input with VIH min 2.4 V and VIL max 0.8 V, and the datasheet limits its absolute range to GND-10 V to VCC+0.3 V. |
| 3 | GND | power_in | Ground reference for all voltage parameters; the datasheet states it tolerates noise spikes up to 5 V on the ground pin of either polarity without damage. |
| 4 | INB | input | Channel B logic input with VIH min 2.4 V and VIL max 0.8 V, and the datasheet limits its absolute range to GND-10 V to VCC+0.3 V. |
| 5 | OUTB | output | Channel B driver output with 4 A typical peak output current, able to accept up to 500 mA reverse current forced back into the output without damage or logic upset. |
| 6 | VCC | power_in | Supply pin; the recommended supply range is 4.5 V to 20 V and the absolute maximum is 25 V, both referenced to GND. |
| 7 | OUTA | output | Channel A driver output with 4 A typical peak output current, able to accept up to 500 mA reverse current forced back into the output without damage or logic upset. |
| 8 | NC | unconnected | No-connect pin, listed as an empty pin in Table 7-1 and not assigned a function. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | WXNSIC |
| Package | DIP-8 |
| Category | Motor Driver ICs |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Logic high-level input voltage | VIH | 2.4 | V | TA= 25℃, VCC=15V, CLOAD=1000uF (table note) | 6 | ||
| Logic low-level input voltage | VIL | 0.8 | V | TA= 25℃, VCC=15V, CLOAD=1000uF (table note) | 6 | ||
| Input current (VIN=0V) | IIN- | 1 | μA | VIN=0V; TA= 25℃, VCC=15V, CLOAD=1000uF (table note) | 6 | ||
| Low-level output voltage drop | VOL | 0.025 | V | TA= 25℃, VCC=15V, CLOAD=1000uF (table note) | 6 | ||
| Rise time | tR | 15 | ns | TA= 25℃, VCC=15V, CLOAD=1000uF (table note) | 6 | ||
| Fall time | tF | 15 | ns | TA= 25℃, VCC=15V, CLOAD=1000uF (table note) | 6 | ||
| Turn-on propagation delay | tON | 25 | 40 | ns | TA= 25℃, VCC=15V, CLOAD=1000uF (table note) | 6 | |
| Turn-off propagation delay | tOFF | 25 | 40 | ns | TA= 25℃, VCC=15V, CLOAD=1000uF (table note) | 6 | |
| Supply current (VINA=VINB=logic high) | IQ1 | 1 | mA | VINA=VINB=logic high; TA= 25℃, VCC=15V, CLOAD=1000uF (table note) | 6 | ||
| Supply current (VINA=VINB=logic low) | IQ0 | 1 | mA | VINA=VINB=logic low; TA= 25℃, VCC=15V, CLOAD=1000uF (table note) | 6 | ||
| Logic input voltage (INA/INB) | VIN | -10 | V | Referenced to GND; minimum printed as GND-10, maximum printed as VCC+0.3 (not numeric) | 5 | ||
| Supply voltage | VCC | 25 | V | Referenced to GND; ambient 25℃ | 5 | ||
| Human body model ESD rating | ESD | -2000 | 2000 | V | Human body model (HBM), printed ±2000 V | 5 | |
| Machine model ESD rating | ESD | -500 | 500 | V | Machine model (MM), printed ±500 V | 5 | |
| Junction temperature | TJ | 150 | °C | 5 | |||
| Storage temperature | TS | -45 | 150 | °C | 5 | ||
| Supply voltage | VCC | 4.5 | 20 | V | Referenced to GND; ambient 25℃ | 5 | |
| Ambient temperature | TC | -40 | 125 | °C | 5 |
CAD (KiCad official)
- Symbol:
NSG27324P - Footprint:
Package_DIP:DIP-8_W7.62mm - 3D model: DIP-8 (KiCad packages3D, STEP)
- 3D model files:
nsg27324p-etched.step/nsg27324p-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);nsg27324p.step/nsg27324p.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: WXNSIC datasheet (9 pp, sha256
2d59e0749634ecd6, retrieved 2026-10-15, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# NSG27324P
**WXNSIC** · Gate Drivers · DIP-8
NSG27324P from WXNSIC, in a DIP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NC | unconnected | No-connect pin, listed as an empty pin in Table 7-1 and not assigned a function. |
| 2 | INA | input | Channel A logic input with VIH min 2.4 V and VIL max 0.8 V, and the datasheet limits its absolute range to GND-10 V to VCC+0.3 V. |
| 3 | GND | power_in | Ground reference for all voltage parameters; the datasheet states it tolerates noise spikes up to 5 V on the ground pin of either polarity without damage. |
| 4 | INB | input | Channel B logic input with VIH min 2.4 V and VIL max 0.8 V, and the datasheet limits its absolute range to GND-10 V to VCC+0.3 V. |
| 5 | OUTB | output | Channel B driver output with 4 A typical peak output current, able to accept up to 500 mA reverse current forced back into the output without damage or logic upset. |
| 6 | VCC | power_in | Supply pin; the recommended supply range is 4.5 V to 20 V and the absolute maximum is 25 V, both referenced to GND. |
| 7 | OUTA | output | Channel A driver output with 4 A typical peak output current, able to accept up to 500 mA reverse current forced back into the output without damage or logic upset. |
| 8 | NC | unconnected | No-connect pin, listed as an empty pin in Table 7-1 and not assigned a function. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | WXNSIC |
| Package | DIP-8 |
| Category | Motor Driver ICs |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Logic high-level input voltage | VIH | 2.4 | | | V | TA= 25℃, VCC=15V, CLOAD=1000uF (table note) | 6 |
| Logic low-level input voltage | VIL | | | 0.8 | V | TA= 25℃, VCC=15V, CLOAD=1000uF (table note) | 6 |
| Input current (VIN=0V) | IIN- | | | 1 | μA | VIN=0V; TA= 25℃, VCC=15V, CLOAD=1000uF (table note) | 6 |
| Low-level output voltage drop | VOL | | | 0.025 | V | TA= 25℃, VCC=15V, CLOAD=1000uF (table note) | 6 |
| Rise time | tR | | | 15 | ns | TA= 25℃, VCC=15V, CLOAD=1000uF (table note) | 6 |
| Fall time | tF | | | 15 | ns | TA= 25℃, VCC=15V, CLOAD=1000uF (table note) | 6 |
| Turn-on propagation delay | tON | | 25 | 40 | ns | TA= 25℃, VCC=15V, CLOAD=1000uF (table note) | 6 |
| Turn-off propagation delay | tOFF | | 25 | 40 | ns | TA= 25℃, VCC=15V, CLOAD=1000uF (table note) | 6 |
| Supply current (VINA=VINB=logic high) | IQ1 | | | 1 | mA | VINA=VINB=logic high; TA= 25℃, VCC=15V, CLOAD=1000uF (table note) | 6 |
| Supply current (VINA=VINB=logic low) | IQ0 | | | 1 | mA | VINA=VINB=logic low; TA= 25℃, VCC=15V, CLOAD=1000uF (table note) | 6 |
| Logic input voltage (INA/INB) | VIN | -10 | | | V | Referenced to GND; minimum printed as GND-10, maximum printed as VCC+0.3 (not numeric) | 5 |
| Supply voltage | VCC | | | 25 | V | Referenced to GND; ambient 25℃ | 5 |
| Human body model ESD rating | ESD | -2000 | | 2000 | V | Human body model (HBM), printed ±2000 V | 5 |
| Machine model ESD rating | ESD | -500 | | 500 | V | Machine model (MM), printed ±500 V | 5 |
| Junction temperature | TJ | | | 150 | °C | | 5 |
| Storage temperature | TS | -45 | | 150 | °C | | 5 |
| Supply voltage | VCC | 4.5 | | 20 | V | Referenced to GND; ambient 25℃ | 5 |
| Ambient temperature | TC | -40 | | 125 | °C | | 5 |
## CAD (KiCad official)
- Symbol: `NSG27324P`
- Footprint: `Package_DIP:DIP-8_W7.62mm`
- 3D model: DIP-8 (KiCad packages3D, STEP)
- 3D model files: `nsg27324p-etched.step` / `nsg27324p-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `nsg27324p.step` / `nsg27324p.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [WXNSIC datasheet](docs/nsg27324p-datasheet.pdf) (9 pp, sha256 `2d59e0749634ecd6`, retrieved 2026-10-15, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/nsg27324p-datasheet.pdf)