NSG2184P

{
  "slug": "nsg2184p",
  "version": "0.1.0",
  "type": "component",
  "description": "WXNSIC Gate Drivers, DIP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "motor driver ics",
    "nsg2184p",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "nsg2184p.kicad_sym",
    "nsg2184p.kicad_mod",
    "nsg2184p.glb",
    "nsg2184p.step",
    "nsg2184p.lbr",
    "docs/hero.png",
    "docs/nsg2184p-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "nsg2184p-hero.glb",
    "nsg2184p-hero.overlay.json",
    "nsg2184p-etched.glb"
  ],
  "component": {
    "mpn": "NSG2184P",
    "manufacturer": "WXNSIC",
    "package": "DIP-8",
    "pin_count": 8,
    "category": "Motor Driver ICs",
    "subcategory": "Gate Drivers",
    "datasheet": "https://datasheet.lcsc.com/datasheet/pdf/ed8be743effff6ffc816829b19f89b68.pdf",
    "parts": {
      "symbol": "nsg2184p.kicad_sym",
      "footprint": "nsg2184p.kicad_mod",
      "model_3d": "nsg2184p-hero.glb",
      "model_3d_plain": "nsg2184p-etched.glb",
      "model_3d_step": "nsg2184p-etched.step",
      "model_3d_step_plain": "nsg2184p.step",
      "lbr": "nsg2184p.lbr"
    },
    "distributor_links": {
      "lcsc": "C49023242"
    },
    "distributor_check": {
      "checked_at": "2026-10-14T21:56:51Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": null,
        "status": "no match"
      },
      "mouser": {
        "pn": null,
        "status": "no match"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "IN",
        "type": "input",
        "description": "High-side and low-side logic input, compatible with 3.3 V, 5 V and 15 V logic with VIH minimum 2.5 V and VIL maximum 0.8 V."
      },
      {
        "number": "2",
        "name": "SD",
        "type": "input",
        "description": "Shutdown signal input (printed with an overbar as SD on the datasheet), with typical input bias current 25 µA at SD = 5 V, maximum 2 µA at SD = 0 V, and propagation delay tsd of 130 ns typical and 220 ns maximum."
      },
      {
        "number": "3",
        "name": "COM",
        "type": "power_in",
        "description": "Ground reference for the logic inputs, the low-side supply and output, and all voltage ratings unless stated otherwise."
      },
      {
        "number": "4",
        "name": "LO",
        "type": "output",
        "description": "Low-side gate driver output with maximum VOL of 0.1 V at 20 mA and a 10 µs pulse sink current IO- of 1.8 A minimum and 4.0 A typical."
      },
      {
        "number": "5",
        "name": "VCC",
        "type": "power_in",
        "description": "Low-side supply with recommended range 10 V to 20 V and absolute maximum 25 V referenced to COM, with undervoltage lockout thresholds of 8.9 V (rising) and 8.2 V (falling) typical."
      },
      {
        "number": "6",
        "name": "VS",
        "type": "power_in",
        "description": "High-side floating supply return with recommended range -9 V to 700 V and absolute range VB - 25 V to VB + 0.3 V."
      },
      {
        "number": "7",
        "name": "HO",
        "type": "output",
        "description": "High-side gate driver output referenced to VS, with absolute range VS - 0.3 V to VB + 0.3 V and a 10 µs pulse source current IO+ of 1.4 A minimum and 4.0 A typical."
      },
      {
        "number": "8",
        "name": "VB",
        "type": "power_in",
        "description": "High-side floating supply with recommended range VS + 10 V to VS + 20 V and absolute maximum 725 V referenced to COM."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: Pin table and DIP-8 top view (Figure 7-1, page 4) are the only pinout source. The figure itself is n; Pin 2 is printed as an overlined SD in the extracted text, which could not be fully confirmed as act; Datasheet ordering table lists the DIP8 package with tape-and-reel packing (编带, 50/条), which is not "
        ],
        "pages_sent": 10,
        "cost_usd": 0.0322,
        "at": "2026-10-14T21:56:38"
      },
      "datasheet": {
        "url": "https://datasheet.lcsc.com/datasheet/pdf/ed8be743effff6ffc816829b19f89b68.pdf",
        "pages": 10,
        "sha256": "4c5a7e5c75233ed9",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 8,
        "described": 8,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "nsg2184p.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "body on z = 0, through-hole leads below",
        "extents_mm": [
          7.874,
          9.27,
          6.98
        ],
        "zmin_mm": -3.3,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "4a377a56a8d9e9c0b86c095ef9ecc1869ac19e7f5069a3247b294250bf4f235d",
        "checked": "2026-10-14",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "nsg2184p-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "body on z = 0, through-hole leads below",
        "extents_mm": [
          7.874,
          9.27,
          6.98
        ],
        "zmin_mm": -3.3,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "4f28eafdb68fe9a2ddd081ac5281c310f1794358f465ad2e90795e94900b9657",
        "checked": "2026-10-14",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}