Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

NSG2103

WXNSIC · Gate Drivers · SOIC-8

NSG2103 from WXNSIC, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VCC power_in Low-side supply pin, recommended 10 V to 20 V referenced to VSS (absolute maximum -0.3 V to 25 V), with integrated UVLO thresholds of 8.9 V (rising) and 8.2 V (falling) typical.
2 HIN input High-side logic input compatible with 3.3 V, 5 V and 15 V logic, with VIH minimum 2.5 V, VIL maximum 0.8 V, and input range 0 V to VCC.
3 LIN input Low-side logic input compatible with 3.3 V, 5 V and 15 V logic, with VIH minimum 2.5 V, VIL maximum 0.8 V, and input range 0 V to VCC.
4 VSS power_in Ground reference for all voltage parameters, logic inputs and the low-side output.
5 LO output Low-side gate drive output swinging between 0 V and VCC, rated for 300 mA source and 600 mA sink peak current (pulse width 10 µs or less).
6 VS power_in High-side floating ground reference, recommended -9 V to 700 V, with dVS/dt tolerance of ±50 V/ns and transient negative swing to VSS-50 V for 50 ns per note 1.
7 HO output High-side gate drive output referenced to VS, swinging between VS and VB.
8 VB power_in High-side floating bootstrap supply, recommended VS+10 V to VS+20 V, with absolute maximum 725 V referenced to VSS.

Key specifications

Parameter Value
Manufacturer WXNSIC
Package SOIC-8
Category Motor Driver ICs
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
High-side floating supply voltage VB (absolute max range) VB -0.3 725 V Referenced to VSS, TA=25°C (section 8.1) 5
Low-side supply voltage VCC (absolute max range) VCC -0.3 25 V Referenced to VSS, TA=25°C (section 8.1) 5
Allowable transient VS slew rate dVS/dt dVS/dt 50 V/ns 5
ESD human body model ESD 1500 V Human body discharge mode 5
ESD machine model ESD 500 V Machine discharge mode 5
SOIC package power dissipation PD1 PD1 625 mW TA ≤ 25°C 5
Junction temperature TJ TJ 150 °C 5
Storage temperature TS TS -55 150 °C 5
Lead temperature TL TL 300 °C/W 5
Thermal resistance junction-to-ambient RthJA RthJA 200 °C/W 5
High-side floating ground voltage VS (recommended) VS -9 700 V Bias ratings measured at supply voltage 15V (section 8.5) 5
Low-side supply voltage VCC (recommended) VCC 10 20 V 5
Ambient temperature TA (recommended) TA -40 125 °C 5
Turn-on propagation delay tON tON 650 820 ns VS=0V 6
Turn-off propagation delay tOFF tOFF 130 200 ns VS=700V 6
Turn-on rise time tR tR 75 130 ns 6
Turn-off fall time tF tF 35 70 ns 6
Dead time DT DT 400 520 650 ns 6
Delay matching time (tON, tOFF) MT MT 50 ns 6
Dead-time matching MDT MDT 60 ns 6
VCC undervoltage positive-going threshold VCCUV+ 8 8.9 9.8 V VCC=VBS=15V, TA=25°C 6
VCC undervoltage negative-going threshold VCCUV- 7.4 8.2 9 V VCC=VBS=15V, TA=25°C 6
High-side floating supply leakage current (700V) ILK 50 μA VB=VS=700V 6
VBS quiescent current IQBS 50 100 μA VIN=0V or 5V 6
VCC quiescent current IQCC 120 240 μA VIN=0V or 5V 6
Input logic high threshold voltage VIH VIH 2.5 V VCC=10V to 20V 6
Input logic low threshold voltage VIL VIL 0.8 V VCC=10V to 20V 6
Output high-level voltage drop VOH VOH 0.1 V IO=0A 6
Output low-level voltage drop VOL VOL 0.1 V IO=0A 6
Logic "1" input bias current IIN+ IIN+ 5 10 μA HIN=5V, LIN=0V 6
Logic "0" input bias current IIN- IIN- 2 μA HIN=0V, LIN=5V 6
Output source current IO+ IO+ 200 300 mA VO=0V, PW≤10us 6
Output sink current IO- IO- 400 600 mA VO=15V, PW≤10us 6
VCC undervoltage hysteresis voltage VCCUVHYS 0.7 V 6

CAD (KiCad official)

  • Symbol: NSG2103
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: nsg2103-etched.step / nsg2103-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); nsg2103.step / nsg2103.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: WXNSIC datasheet (9 pp, sha256 e9c1b7caca66f39f, retrieved 2026-11-05, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF