main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs ns4251: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers ns4251: viewers · Ray
ns4251-etched.fit.json ns4251: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
ns4251-etched.glb ns4251: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
ns4251-etched.step ns4251: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
ns4251.glb Publish 0.1.0 · Ray
ns4251.kicad_mod Publish 0.1.0 · Ray
ns4251.kicad_sym Publish 0.1.0 · Ray
ns4251.lbr Publish 0.1.0 · Ray
ns4251.step Publish 0.1.0 · Ray
package.json ns4251: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
page.json ns4251: specified limits as data (metadata.characteristics, 38 rows from the datasheet) · Ray
README.md ns4251: specified limits as data (metadata.characteristics, 38 rows from the datasheet) · Ray

NS4251

Shenzhen Nsiway Tech · Audio Amplifiers · QFN-16-EP(3x3)

NS4251 from Shenzhen Nsiway Tech, in a QFN-16-EP(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VOPB output Right channel positive audio output for bridged speaker mode or right headphone output in single-ended mode.
2 HP-IN input Headphone mode control input with VIL=0.4V selecting bridged output and VIH=1.4V selecting single-ended headphone output.
3 SD input Shutdown control input (active high) with shutdown current of 1-10µA when enabled; design with pull-up to ensure shutdown during floating or high-impedance conditions.
4 VOPA output Left channel positive audio output for bridged speaker mode or left headphone output in single-ended mode.
5 GND power_in Power ground reference.
6 VDD power_in Power supply input rated 3.0V to 5.5V with bypass capacitor (10µF electrolytic
7 VONA output Left channel negative audio output providing signal return for bridged speaker output.
8 INNA input Left channel input signal (negative terminal) AC-coupled through capacitor Ci (0.1µF-0.39µF) and resistor Ri setting gain Av=240k/Rin.
9 GND power_in Power ground reference.
10 /3D input 3D surround stereo function control input (active low); low level enables 3D processing, high level disables it.
11 VREF power_in Reference voltage bypass pin requiring 1µF capacitor to ground for quiescent point stabilization and pop noise reduction.
12 AB/D input Class AB/D mode control input (cannot float); low level enables Class AB mode, high level enables Class D mode with 350kHz PWM frequency.
13 INNB input Right channel input signal (negative terminal) AC-coupled through capacitor Ci (0.1µF-0.39µF) and resistor Ri setting gain Av=240k/Rin.
14 VONB output Channel negative audio output (datasheet labels as left channel but naming convention suggests right channel B); provides signal return for output stage.
15 VDD power_in Power supply input rated 3.0V to 5.5V with bypass capacitor (10µF electrolytic
16 GND power_in Power ground reference.
17 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Shenzhen Nsiway Tech
Package QFN-16-EP(3x3)
Category Amplifiers/Comparators
Pins 17

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage VDD 3 5.5 V 4
Power supply quiescent current IDD 11 mA VDD =3.6V,VIN=0V,No load 4
Power supply quiescent current IDD 20 mA VDD =5.0V,VIN=0V,No load 4
Shutdown leakage current ISD 1 10 µA V/SD =3.3V 4
Output offset voltage VOS 10 40 mV 4
Output resistance RO 3 K 4
Power supply rejection ratio PSRR -80 dB 217Hz 4
Power supply rejection ratio PSRR -72 dB 20KHz 4
Common-mode rejection ratio CMRR -70 dB 4
Modulation frequency fSW 350 kHz VDD =3.0V to 5.25V 4
Efficiency η 90 % Po=0.5W,RL =8Ω,VDD =3.6V 4
Logic control high-level input voltage VIH 1.4 V 4
Logic control low-level input voltage VIL 0.4 V 4
Earphone output power PO 110 mW VDD=5.0V, THD=1%, f=1KHz, RL=16Ω 4
Earphone output power PO 80 mW VDD=5.0V, THD=1%, f=1KHz, RL=32Ω 4
Stereo crosstalk (earphone mode) XTALK -85 dB VDD=5.0V, RL=32Ω, Po=10mW 4
Earphone THD THD 0.2 % VDD=5.0V, RL=16Ω/32Ω, f=1KHz, PO=10mW 4
Earphone SNR SNR 75 dB VDD=5.0V, RL=32Ω, Po=10mW 4
Speaker output power PO 2 W VDD=5.0V, THD=1%, f=1KHz, ClassAB, RL=4Ω 4
Speaker output power PO 1.3 W VDD=5.0V, THD=1%, f=1KHz, ClassAB, RL=8Ω 4
Speaker output power PO 2.6 W VDD=5.0V, THD=10%, f=1KHz, ClassAB, RL=4Ω 4
Speaker output power PO 1.7 W VDD=5.0V, THD=10%, f=1KHz, ClassAB, RL=8Ω 4
Speaker output power PO 2.1 W VDD=5.0V, THD=1%, f=1KHz, ClassD, RL=4Ω 4
Speaker output power PO 1.4 W VDD=5.0V, THD=1%, f=1KHz, ClassD, RL=8Ω 4
Speaker output power PO 3 W VDD=5.0V, THD=10%, f=1KHz, ClassD, RL=4Ω 4
Speaker THD (Class D) THD 0.2 % VDD=5.0V, f=1KHz, ClassD, PO=0.5W, RL=4Ω/8Ω 5
Stereo isolation -80 dB VDD=5.0V, RL=4Ω, Po=0.5W 5
Speaker SNR S/NR 75 dB VDD=5.0V, RL=4Ω, Po=0.5W 5
Supply voltage VDD 1.8 6 V 3
Storage temperature Tstg -65 150 °C 3
Input voltage VIN -0.3 V Upper limit printed as VDD 3
ESD withstand voltage 4000 V 3
Junction temperature Tj 150 °C 3
Soldering temperature 220 °C 3
Operating temperature TA -40 85 °C 3
Operating voltage 3 5.5 V 3
Thermal resistance junction-to-case θJC 20 °C/W SOP16 package as printed 3
Thermal resistance junction-to-ambient θJA 80 °C/W SOP16 package as printed 3

CAD (KiCad official)

  • Symbol: NS4251
  • Footprint: Package_DFN_QFN:QFN-16-1EP_3x3mm_P0.5mm_EP1.7x1.7mm
  • 3D model: QFN-16-EP(3x3) (KiCad packages3D, STEP)
  • 3D model files: ns4251-etched.step / ns4251-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ns4251.step / ns4251.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Shenzhen Nsiway Tech datasheet (12 pp, sha256 eb0cd92f2be3a786, retrieved 2026-09-22, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-4-6 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF