NS4160

@@ -127,6 +127,7 @@         <technology name="">           <attribute name="MPN" value="NS4160" constant="no"/>           <attribute name="MANUFACTURER" value="Shenzhen Nsiway Tech" constant="no"/>+          <attribute name="LCSC_PN" value="C219017" constant="no"/>         </technology>       </technologies>     </device>

@@ -26,43 +26,45 @@       "model_3d_step": "ns4160.step",       "lbr": "ns4160.lbr"     },-    "distributor_links": {},+    "distributor_links": {+      "lcsc": "C219017"+    },     "pins": [       {         "number": "1",         "name": "CTRL",         "type": "input",-        "description": "Shutdown and Class-AB/Class-D mode selection control input via a one-wire pulse protocol. Logic low shuts down the amplifier (Vctrl=VDD puts the chip in shutdown with ~1 µA typical leakage). VIH ≥ 1.4V, VIL ≤ 0.4V; one-wire pulse high/low time 1-12 µs, shutdown assertion time ≥ 100 µs."+        "description": "Shutdown and Class-AB/Class-D mode selection control input via a one-wire pulse protocol. Logic low shuts down the amplifier (Vctrl=VDD puts the chip in shutdown with ~1 \u00b5A typical leakage). VIH \u2265 1.4V, VIL \u2264 0.4V; one-wire pulse high/low time 1-12 \u00b5s, shutdown assertion time \u2265 100 \u00b5s."       },       {         "number": "2",         "name": "Bypass",         "type": "passive",-        "description": "Internal reference-voltage bypass node. Connect an external decoupling capacitor (typ. 0.1 µF) from this pin to GND to filter the mid-supply reference and improve PSRR/noise performance."+        "description": "Internal reference-voltage bypass node. Connect an external decoupling capacitor (typ. 0.1 \u00b5F) from this pin to GND to filter the mid-supply reference and improve PSRR/noise performance."       },       {         "number": "3",         "name": "INP",         "type": "input",-        "description": "Positive (non-inverting) differential audio input to the input buffer. AC-coupled through a 0.1 µF capacitor with a 10 kΩ series/gain-setting resistor in the typical application."+        "description": "Positive (non-inverting) differential audio input to the input buffer. AC-coupled through a 0.1 \u00b5F capacitor with a 10 k\u03a9 series/gain-setting resistor in the typical application."       },       {         "number": "4",         "name": "INN",         "type": "input",-        "description": "Negative (inverting) differential audio input to the input buffer. AC-coupled through a 0.1 µF capacitor with a 10 kΩ series/gain-setting resistor in the typical application."+        "description": "Negative (inverting) differential audio input to the input buffer. AC-coupled through a 0.1 \u00b5F capacitor with a 10 k\u03a9 series/gain-setting resistor in the typical application."       },       {         "number": "5",         "name": "VoN",         "type": "output",-        "description": "Negative bridge-tied-load (BTL) speaker output from the output stage. Drives one terminal of the loudspeaker directly (filterless in Class-D mode); supports 2Ω/4Ω/8Ω loads."+        "description": "Negative bridge-tied-load (BTL) speaker output from the output stage. Drives one terminal of the loudspeaker directly (filterless in Class-D mode); supports 2\u03a9/4\u03a9/8\u03a9 loads."       },       {         "number": "6",         "name": "VDD",         "type": "power_in",-        "description": "Positive power supply input, 3.0 V to 5.5 V (absolute max 5.5 V). Decouple to GND with a 1 µF capacitor close to the pin. Typical quiescent current IDD ≈ 12 mA at 3.6 V and 18 mA at 5.0 V."+        "description": "Positive power supply input, 3.0 V to 5.5 V (absolute max 5.5 V). Decouple to GND with a 1 \u00b5F capacitor close to the pin. Typical quiescent current IDD \u2248 12 mA at 3.6 V and 18 mA at 5.0 V."       },       {         "number": "7",@@ -74,7 +76,7 @@         "number": "8",         "name": "VoP",         "type": "output",-        "description": "Positive bridge-tied-load (BTL) speaker output from the output stage. Drives the other terminal of the loudspeaker directly (filterless in Class-D mode); supports 2Ω/4Ω/8Ω loads."+        "description": "Positive bridge-tied-load (BTL) speaker output from the output stage. Drives the other terminal of the loudspeaker directly (filterless in Class-D mode); supports 2\u03a9/4\u03a9/8\u03a9 loads."       },       {         "number": "9",