main
Ray
ns4150c: specified limits as data (metadata.characteristics, 15 rows from the datasheet)
7ba57b8
NS4150C
Shenzhen Nsiway Tech · Audio Power OpAmps · SOP-8
NS4150C from Shenzhen Nsiway Tech, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | CTRL | input | Operating mode control. Logic high enables the amplifier (Open/Play mode); logic low shuts down the device. VIH ≥ 1.6V @ VDD=5V (1.2V @ VDD=3V); VIL ≤ 0.2V. |
| 2 | Bypass | passive | Internal common-mode voltage bypass capacitor pin. Connect a 1µF ceramic capacitor to GND. Capacitance affects startup time (~165ms @ 5V, ~230ms @ 3V with 1µF). |
| 3 | INP | input | Positive audio input. AC-coupled through Cin and series input resistor Rin; forms a high-pass filter with the internal 240kΩ feedback resistor (gain AVD = 240kΩ/Rin). |
| 4 | INN | input | Negative audio input. AC-coupled through Cin and series input resistor Rin for differential input; tie through Cin/Rin to GND for single-ended input. |
| 5 | VoN | output | Negative Class-D BTL speaker output. Connects to one terminal of the 4Ω or 8Ω speaker load; filterless PWM drive, optional ferrite bead + 1nF for EMI on long wiring. |
| 6 | VCC | power_in | Supply input for the chip and audio output power stage. Recommended operating range 2.2V to 5.0V (absolute max 5.25V). Decouple with 1µF ceramic close to pin, add 10µF for low-frequency filtering. |
| 7 | GND | power_in | Device ground reference. Connect to system ground plane; provides return for supply, bypass capacitor and speaker output currents. |
| 8 | VoP | output | Positive Class-D BTL speaker output. Connects to the other terminal of the speaker load; filterless PWM drive, optional ferrite bead + 1nF for EMI on long wiring. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Shenzhen Nsiway Tech |
| Package | SOP-8 |
| Category | Op-amp/Cmp |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage VDD (absolute maximum) | VDD | -0.3 | 5.25 | V | 2 | ||
| INP/INN/CTRL pin voltage | -0.3 | V | 2 | ||||
| Storage temperature | -65 | 150 | oC | 2 | |||
| ESD voltage | -4000 | 4000 | V | 2 | |||
| Junction temperature | 150 | oC | 2 | ||||
| Latch-up | -150 | 150 | mA | 2 | |||
| Soldering temperature | 220 | oC | within 15 s | 2 | |||
| Recommended operating supply voltage | 2.2 | 5 | V | 2 | |||
| Recommended operating temperature | -40 | 85 | oC | 2 | |||
| Thermal resistance junction-to-case | JC | 150 | oC/W | SOP-8 | 2 | ||
| Supply voltage VDD | VDD | 3 | 4.8 | 5 | V | 3 | |
| Quiescent supply current | IDD | 4 | mA | VIN=0V, VDD=3.6V, No Load | 3 | ||
| Shutdown leakage current | ISD | 1 | 10 | µA | VDD=3.6V, CTRL=0V | 3 | |
| Output offset voltage | VOS | 5 | 20 | mV | VIN=0V, VDD=3.0V to 5.0V | 3 | |
| CTRL input low voltage | VIL | 0 | 0.2 | V | 功放关断 | 3 |
CAD (KiCad official)
- Symbol:
NS4150C - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
ns4150c-etched.step/ns4150c-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ns4150c.step/ns4150c.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Shenzhen Nsiway Tech datasheet (9 pp, sha256
d637b1b6c4dc42b4, retrieved 2026-08-17, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# NS4150C
**Shenzhen Nsiway Tech** · Audio Power OpAmps · SOP-8
NS4150C from Shenzhen Nsiway Tech, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | CTRL | input | Operating mode control. Logic high enables the amplifier (Open/Play mode); logic low shuts down the device. VIH ≥ 1.6V @ VDD=5V (1.2V @ VDD=3V); VIL ≤ 0.2V. |
| 2 | Bypass | passive | Internal common-mode voltage bypass capacitor pin. Connect a 1µF ceramic capacitor to GND. Capacitance affects startup time (~165ms @ 5V, ~230ms @ 3V with 1µF). |
| 3 | INP | input | Positive audio input. AC-coupled through Cin and series input resistor Rin; forms a high-pass filter with the internal 240kΩ feedback resistor (gain AVD = 240kΩ/Rin). |
| 4 | INN | input | Negative audio input. AC-coupled through Cin and series input resistor Rin for differential input; tie through Cin/Rin to GND for single-ended input. |
| 5 | VoN | output | Negative Class-D BTL speaker output. Connects to one terminal of the 4Ω or 8Ω speaker load; filterless PWM drive, optional ferrite bead + 1nF for EMI on long wiring. |
| 6 | VCC | power_in | Supply input for the chip and audio output power stage. Recommended operating range 2.2V to 5.0V (absolute max 5.25V). Decouple with 1µF ceramic close to pin, add 10µF for low-frequency filtering. |
| 7 | GND | power_in | Device ground reference. Connect to system ground plane; provides return for supply, bypass capacitor and speaker output currents. |
| 8 | VoP | output | Positive Class-D BTL speaker output. Connects to the other terminal of the speaker load; filterless PWM drive, optional ferrite bead + 1nF for EMI on long wiring. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Shenzhen Nsiway Tech |
| Package | SOP-8 |
| Category | Op-amp/Cmp |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage VDD (absolute maximum) | VDD | -0.3 | | 5.25 | V | | 2 |
| INP/INN/CTRL pin voltage | | -0.3 | | | V | | 2 |
| Storage temperature | | -65 | | 150 | oC | | 2 |
| ESD voltage | | -4000 | | 4000 | V | | 2 |
| Junction temperature | | | | 150 | oC | | 2 |
| Latch-up | | -150 | | 150 | mA | | 2 |
| Soldering temperature | | | | 220 | oC | within 15 s | 2 |
| Recommended operating supply voltage | | 2.2 | | 5 | V | | 2 |
| Recommended operating temperature | | -40 | | 85 | oC | | 2 |
| Thermal resistance junction-to-case | JC | | | 150 | oC/W | SOP-8 | 2 |
| Supply voltage VDD | VDD | 3 | 4.8 | 5 | V | | 3 |
| Quiescent supply current | IDD | | | 4 | mA | VIN=0V, VDD=3.6V, No Load | 3 |
| Shutdown leakage current | ISD | | 1 | 10 | µA | VDD=3.6V, CTRL=0V | 3 |
| Output offset voltage | VOS | | 5 | 20 | mV | VIN=0V, VDD=3.0V to 5.0V | 3 |
| CTRL input low voltage | VIL | 0 | | 0.2 | V | 功放关断 | 3 |
## CAD (KiCad official)
- Symbol: `NS4150C`
- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`
- 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files: `ns4150c-etched.step` / `ns4150c-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ns4150c.step` / `ns4150c.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Shenzhen Nsiway Tech datasheet](docs/ns4150c-datasheet.pdf) (9 pp, sha256 `d637b1b6c4dc42b4`, retrieved 2026-08-17, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/ns4150c-datasheet.pdf)