main
Ray
Publish 0.1.0
101df3e
NRVS1BFL
onsemi · Diodes - General Purpose · SOD-123F
NRVS1BFL from onsemi, in a SOD-123F. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Cathode | passive | Cathode lead, identified by the band on the package; the junction-to-lead thermal characteristic (RθJL) is specified with the thermocouple soldered at the cathode lead. |
| 2 | Anode | passive | Anode lead of the rectifier; the datasheet gives no separate electrical limit for this pin beyond the device ratings (VRRM 100 V and IF(AV) 1 A for the S1BFL/NRVS1BFL). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | onsemi |
| Package | SOD-123F |
| Category | Diodes |
| Pins | 2 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Recurrent Peak Reverse Voltage (S1BFL/NRVS1BFL column) | VRRM | 100 | V | 2 | |||
| RMS Voltage (S1BFL/NRVS1BFL column) | VRMS | 70 | V | 2 | |||
| DC Blocking Voltage (S1BFL/NRVS1BFL column) | VDC | 100 | V | 2 | |||
| Average Forward Current | IF(AV) | 1 | A | 2 | |||
| Peak One Cycle Forward Current (Non-Repetitive) | IFSM | 30 | A | at 60Hz | 2 | ||
| Operating and Storage Temperature Range | TJ, TSTG | -55 | 175 | °C | 2 | ||
| Forward Voltage | VF | 1.1 | V | IF = 1 A | 2 | ||
| Reverse Current, TA = 25°C | IR | 1 | A | VR = VDC, TA = 25°C | 2 | ||
| Reverse Current, TA = 125°C | IR | 50 | A | VR = VDC, TA = 125°C | 2 | ||
| Reverse Recovery Time | Trr | 1.304 | 2 | s | IF = 0.5 A, IR = 1 A, Irr = 0.25 A | 2 | |
| Typical Thermal Characteristics, Junction-to-Lead | JL | 25 | °C/W | Thermocouple soldered at cathode lead (Note 3) | 2 | ||
| Typical Thermal Resistance, Junction-to-Ambient | RJA | 140 | °C/W | Per JESD51-3 recommended thermal test board, FR-4 76.2 mm x 114.3 mm (Note 2) | 2 |
CAD (KiCad official)
- Symbol:
NRVS1BFL - Footprint:
Diode_SMD:D_SOD-123F - 3D model: SOD-123F (KiCad packages3D, STEP)
- 3D model files:
nrvs1bfl-etched.step/nrvs1bfl-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);nrvs1bfl.step/nrvs1bfl.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: onsemi datasheet (5 pp, sha256
ce7e0312600bdddb, retrieved 2026-10-30, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# NRVS1BFL
**onsemi** · Diodes - General Purpose · SOD-123F
NRVS1BFL from onsemi, in a SOD-123F. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Cathode | passive | Cathode lead, identified by the band on the package; the junction-to-lead thermal characteristic (RθJL) is specified with the thermocouple soldered at the cathode lead. |
| 2 | Anode | passive | Anode lead of the rectifier; the datasheet gives no separate electrical limit for this pin beyond the device ratings (VRRM 100 V and IF(AV) 1 A for the S1BFL/NRVS1BFL). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | onsemi |
| Package | SOD-123F |
| Category | Diodes |
| Pins | 2 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Recurrent Peak Reverse Voltage (S1BFL/NRVS1BFL column) | VRRM | | | 100 | V | | 2 |
| RMS Voltage (S1BFL/NRVS1BFL column) | VRMS | | | 70 | V | | 2 |
| DC Blocking Voltage (S1BFL/NRVS1BFL column) | VDC | | | 100 | V | | 2 |
| Average Forward Current | IF(AV) | | | 1 | A | | 2 |
| Peak One Cycle Forward Current (Non-Repetitive) | IFSM | | | 30 | A | at 60Hz | 2 |
| Operating and Storage Temperature Range | TJ, TSTG | -55 | | 175 | °C | | 2 |
| Forward Voltage | VF | | | 1.1 | V | IF = 1 A | 2 |
| Reverse Current, TA = 25°C | IR | | | 1 | A | VR = VDC, TA = 25°C | 2 |
| Reverse Current, TA = 125°C | IR | | | 50 | A | VR = VDC, TA = 125°C | 2 |
| Reverse Recovery Time | Trr | | 1.304 | 2 | s | IF = 0.5 A, IR = 1 A, Irr = 0.25 A | 2 |
| Typical Thermal Characteristics, Junction-to-Lead | JL | | 25 | | °C/W | Thermocouple soldered at cathode lead (Note 3) | 2 |
| Typical Thermal Resistance, Junction-to-Ambient | RJA | | 140 | | °C/W | Per JESD51-3 recommended thermal test board, FR-4 76.2 mm x 114.3 mm (Note 2) | 2 |
## CAD (KiCad official)
- Symbol: `NRVS1BFL`
- Footprint: `Diode_SMD:D_SOD-123F`
- 3D model: SOD-123F (KiCad packages3D, STEP)
- 3D model files: `nrvs1bfl-etched.step` / `nrvs1bfl-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `nrvs1bfl.step` / `nrvs1bfl.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [onsemi datasheet](https://www.onsemi.com/pdf/datasheet/nrvs1bfl-d.pdf) (5 pp, sha256 `ce7e0312600bdddb`, retrieved 2026-10-30, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/nrvs1bfl-datasheet.pdf)