← Commit history

Initial commit: component/npca110ba0yx

Ray ·3fdb95ecb3 ·
2 files changed +365
README.mdadded+69
@@ -0,0 +1,69 @@+# NPCA110BA0YX++**Nuvoton Tech** · Audio Interface ICs · QFN-32-EP(5x5)++NPCA110BA0YX from Nuvoton Tech, in a QFN-32-EP(5x5). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | nRESET | input | Power-Up Reset Input that forces reset when driven low; 5V tolerant Schmitt trigger with internal pull-up resistor. |+| 2 | VDD | power_in | 3.3V Digital Supply to I/O interface and internal regulators; supply range 3.13V to 3.47V. |+| 3 | VD18 | power_in | Internal 1.8V Supply for internal logic; requires 4.7 µF ceramic capacitor to digital ground. |+| 4 | GPIO20/SDI0 | input | I2S Serial Data In 0 carrying stereo input stream; 5V tolerant with internal pull-up and push-pull output capability for GPIO mode. |+| 5 | VSSP | power_in | PLL Ground; connect to digital ground plane via 0 Ω resistor. |+| 6 | VPLL18 | power_in | PLL 1.8V Supply internally generated; requires 4.7 µF ceramic capacitor to VSSP. |+| 7 | XTALO | output | Crystal Clock Output used for crystal oscillator circuit connection. |+| 8 | XTALI/CLKIN | input | Crystal Clock Input or external clock input at LVTTL levels; supports 12.288 MHz (48 kHz) or 11.2896 MHz (44.1 kHz) crystals. |+| 9 | GPO18/I2CMS | output | General-Purpose Output Signal 18 that also functions as I2C Master/Slave strap sampled during power-up reset; 5V tolerant with internal pull-up. |+| 10 | VDD | power_in | 3.3V Digital Supply to I/O interface and internal regulators; supply range 3.13V to 3.47V. |+| 11 | VSS | power_in | Digital Ground; connect to digital ground plane. |+| 12 | RIN1 | input | Analog-to-Digital Converter Input Pair 1 Right Input; requires AC coupling with 1 µF (or 0.33 µF) capacitor. |+| 13 | LIN1 | input | Analog-to-Digital Converter Input Pair 1 Left Input; requires AC coupling with 1 µF (or 0.33 µF) capacitor. |+| 14 | RIN2 | input | Analog-to-Digital Converter Input Pair 2 Right Input; requires AC coupling with 1 µF (or 0.33 µF) capacitor. |+| 15 | LIN2 | input | Analog-to-Digital Converter Input Pair 2 Left Input; requires AC coupling with 1 µF (or 0.33 µF) capacitor. |+| 16 | LOUT2 | output | Digital-to-Analog Converter Left Output from DAC2. |+| 17 | ROUT2 | output | Digital-to-Analog Converter Right Output from DAC2. |+| 18 | DAC_REF | power_out | CODEC Internally Generated DAC Reference Voltage; connect via 0.1 µF ceramic and 22 µF tantalum/ceramic capacitor to AVSS. |+| 19 | VCM | power_out | CODEC Internally Generated Common-Mode Voltage; connect via 0.1 µF ceramic and 22 µF tantalum/ceramic capacitor to AVSS. |+| 20 | AGND | power_in | CODEC Analog Ground; connect to analog ground plane and to digital ground at single point near AVDD pin. |+| 21 | AVDD | power_in | CODEC Analog 3.3V Supply (3.00V to 3.47V); requires 0.1 µF ceramic and 22 µF bypass capacitors to AVSS. |+| 22 | VSS | power_in | Digital Ground; connect to digital ground plane. |+| 23 | VDD | power_in | 3.3V Digital Supply to I/O interface and internal regulators; supply range 3.13V to 3.47V. |+| 24 | GPO07/CLKOUT/REF | output | General-Purpose Clock Output that also functions as Reference strap sampled during power-up reset; 5V tolerant with pull-up; requires 33-100 Ω series resistor when used as output. |+| 25 | GPO06/SDO0/nTEST | output | I2S Serial Data Out 0 carrying stereo output stream that also functions as test strap sampled during power-up reset; 5V tolerant with pull-up; requires 33-100 Ω series resistor. |+| 26 | GPIO01/SYNC | bidirectional | I2S SYNC input for slave mode or output for master mode indicating sample frequency; 5V tolerant bidirectional with pull-up; requires 33-100 Ω series resistor when used as output. |+| 27 | VDD | power_in | 3.3V Digital Supply to I/O interface and internal regulators; supply range 3.13V to 3.47V. |+| 28 | GPIO00/DCLK | bidirectional | I2S Clock input for slave mode or output for master mode (32x or 64x sample frequency); 5V tolerant bidirectional with pull-up; requires 33-100 Ω series resistor when used as output. |+| 29 | GPO17 | output | General-Purpose Output Signal 17; 5V tolerant push-pull output capable of sourcing 8 mA and sinking 8 mA. |+| 30 | SCL | bidirectional | Master/Slave I2C Clock Line; 5V tolerant open-drain output with Schmitt trigger input that rejects pulses less than 5 ns. |+| 31 | SDA | bidirectional | Master/Slave I2C Data Line; 5V tolerant open-drain output with Schmitt trigger input. |+| 32 | ADC_REF | power_out | CODEC Internally Generated ADC Reference Voltage; connect via 0.1 µF ceramic and 22 µF tantalum/ceramic capacitor to AVSS. |+| 33 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Nuvoton Tech |+| Package | QFN-32-EP(5x5) |+| Category | Interface |+| Pins | 33 |++## CAD (KiCad official)++- Symbol: `NPCA110BA0YX`+- Footprint: `Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.3x3.3mm`+- 3D model: QFN-32-EP(5x5) (KiCad packages3D, STEP)+- 3D model files: `npca110ba0yx-etched.step` / `npca110ba0yx-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `npca110ba0yx.step` / `npca110ba0yx.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Nuvoton Tech datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588883888634802176) (30 pp, sha256 `89dd1b86e8fddb6b`, retrieved 2026-09-22, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-4-6` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/npca110ba0yx-datasheet.pdf)
page.jsonadded+296
@@ -0,0 +1,296 @@+{+  "slug": "npca110ba0yx",+  "version": "0.1.0",+  "type": "component",+  "description": "Nuvoton Tech Audio Interface ICs, QFN-32-EP(5x5). Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "interface",+    "npca110ba0yx",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "npca110ba0yx.kicad_sym",+    "npca110ba0yx.kicad_mod",+    "npca110ba0yx.glb",+    "npca110ba0yx.step",+    "npca110ba0yx.lbr",+    "docs/hero.png",+    "docs/npca110ba0yx-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "NPCA110BA0YX",+    "manufacturer": "Nuvoton Tech",+    "package": "QFN-32-EP(5x5)",+    "pin_count": 33,+    "category": "Interface",+    "subcategory": "Audio Interface ICs",+    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588883888634802176",+    "parts": {+      "symbol": "npca110ba0yx.kicad_sym",+      "footprint": "npca110ba0yx.kicad_mod",+      "model_3d": "npca110ba0yx-etched.glb",+      "model_3d_plain": "npca110ba0yx.glb",+      "model_3d_step": "npca110ba0yx-etched.step",+      "model_3d_step_plain": "npca110ba0yx.step",+      "lbr": "npca110ba0yx.lbr"+    },+    "distributor_links": {+      "lcsc": "C249432"+    },+    "pins": [+      {+        "number": "1",+        "name": "nRESET",+        "type": "input",+        "description": "Power-Up Reset Input that forces reset when driven low; 5V tolerant Schmitt trigger with internal pull-up resistor."+      },+      {+        "number": "2",+        "name": "VDD",+        "type": "power_in",+        "description": "3.3V Digital Supply to I/O interface and internal regulators; supply range 3.13V to 3.47V."+      },+      {+        "number": "3",+        "name": "VD18",+        "type": "power_in",+        "description": "Internal 1.8V Supply for internal logic; requires 4.7 µF ceramic capacitor to digital ground."+      },+      {+        "number": "4",+        "name": "GPIO20/SDI0",+        "type": "input",+        "description": "I2S Serial Data In 0 carrying stereo input stream; 5V tolerant with internal pull-up and push-pull output capability for GPIO mode."+      },+      {+        "number": "5",+        "name": "VSSP",+        "type": "power_in",+        "description": "PLL Ground; connect to digital ground plane via 0 Ω resistor."+      },+      {+        "number": "6",+        "name": "VPLL18",+        "type": "power_in",+        "description": "PLL 1.8V Supply internally generated; requires 4.7 µF ceramic capacitor to VSSP."+      },+      {+        "number": "7",+        "name": "XTALO",+        "type": "output",+        "description": "Crystal Clock Output used for crystal oscillator circuit connection."+      },+      {+        "number": "8",+        "name": "XTALI/CLKIN",+        "type": "input",+        "description": "Crystal Clock Input or external clock input at LVTTL levels; supports 12.288 MHz (48 kHz) or 11.2896 MHz (44.1 kHz) crystals."+      },+      {+        "number": "9",+        "name": "GPO18/I2CMS",+        "type": "output",+        "description": "General-Purpose Output Signal 18 that also functions as I2C Master/Slave strap sampled during power-up reset; 5V tolerant with internal pull-up."+      },+      {+        "number": "10",+        "name": "VDD",+        "type": "power_in",+        "description": "3.3V Digital Supply to I/O interface and internal regulators; supply range 3.13V to 3.47V."+      },+      {+        "number": "11",+        "name": "VSS",+        "type": "power_in",+        "description": "Digital Ground; connect to digital ground plane."+      },+      {+        "number": "12",+        "name": "RIN1",+        "type": "input",+        "description": "Analog-to-Digital Converter Input Pair 1 Right Input; requires AC coupling with 1 µF (or 0.33 µF) capacitor."+      },+      {+        "number": "13",+        "name": "LIN1",+        "type": "input",+        "description": "Analog-to-Digital Converter Input Pair 1 Left Input; requires AC coupling with 1 µF (or 0.33 µF) capacitor."+      },+      {+        "number": "14",+        "name": "RIN2",+        "type": "input",+        "description": "Analog-to-Digital Converter Input Pair 2 Right Input; requires AC coupling with 1 µF (or 0.33 µF) capacitor."+      },+      {+        "number": "15",+        "name": "LIN2",+        "type": "input",+        "description": "Analog-to-Digital Converter Input Pair 2 Left Input; requires AC coupling with 1 µF (or 0.33 µF) capacitor."+      },+      {+        "number": "16",+        "name": "LOUT2",+        "type": "output",+        "description": "Digital-to-Analog Converter Left Output from DAC2."+      },+      {+        "number": "17",+        "name": "ROUT2",+        "type": "output",+        "description": "Digital-to-Analog Converter Right Output from DAC2."+      },+      {+        "number": "18",+        "name": "DAC_REF",+        "type": "power_out",+        "description": "CODEC Internally Generated DAC Reference Voltage; connect via 0.1 µF ceramic and 22 µF tantalum/ceramic capacitor to AVSS."+      },+      {+        "number": "19",+        "name": "VCM",+        "type": "power_out",+        "description": "CODEC Internally Generated Common-Mode Voltage; connect via 0.1 µF ceramic and 22 µF tantalum/ceramic capacitor to AVSS."+      },+      {+        "number": "20",+        "name": "AGND",+        "type": "power_in",+        "description": "CODEC Analog Ground; connect to analog ground plane and to digital ground at single point near AVDD pin."+      },+      {+        "number": "21",+        "name": "AVDD",+        "type": "power_in",+        "description": "CODEC Analog 3.3V Supply (3.00V to 3.47V); requires 0.1 µF ceramic and 22 µF bypass capacitors to AVSS."+      },+      {+        "number": "22",+        "name": "VSS",+        "type": "power_in",+        "description": "Digital Ground; connect to digital ground plane."+      },+      {+        "number": "23",+        "name": "VDD",+        "type": "power_in",+        "description": "3.3V Digital Supply to I/O interface and internal regulators; supply range 3.13V to 3.47V."+      },+      {+        "number": "24",+        "name": "GPO07/CLKOUT/REF",+        "type": "output",+        "description": "General-Purpose Clock Output that also functions as Reference strap sampled during power-up reset; 5V tolerant with pull-up; requires 33-100 Ω series resistor when used as output."+      },+      {+        "number": "25",+        "name": "GPO06/SDO0/nTEST",+        "type": "output",+        "description": "I2S Serial Data Out 0 carrying stereo output stream that also functions as test strap sampled during power-up reset; 5V tolerant with pull-up; requires 33-100 Ω series resistor."+      },+      {+        "number": "26",+        "name": "GPIO01/SYNC",+        "type": "bidirectional",+        "description": "I2S SYNC input for slave mode or output for master mode indicating sample frequency; 5V tolerant bidirectional with pull-up; requires 33-100 Ω series resistor when used as output."+      },+      {+        "number": "27",+        "name": "VDD",+        "type": "power_in",+        "description": "3.3V Digital Supply to I/O interface and internal regulators; supply range 3.13V to 3.47V."+      },+      {+        "number": "28",+        "name": "GPIO00/DCLK",+        "type": "bidirectional",+        "description": "I2S Clock input for slave mode or output for master mode (32x or 64x sample frequency); 5V tolerant bidirectional with pull-up; requires 33-100 Ω series resistor when used as output."+      },+      {+        "number": "29",+        "name": "GPO17",+        "type": "output",+        "description": "General-Purpose Output Signal 17; 5V tolerant push-pull output capable of sourcing 8 mA and sinking 8 mA."+      },+      {+        "number": "30",+        "name": "SCL",+        "type": "bidirectional",+        "description": "Master/Slave I2C Clock Line; 5V tolerant open-drain output with Schmitt trigger input that rejects pulses less than 5 ns."+      },+      {+        "number": "31",+        "name": "SDA",+        "type": "bidirectional",+        "description": "Master/Slave I2C Data Line; 5V tolerant open-drain output with Schmitt trigger input."+      },+      {+        "number": "32",+        "name": "ADC_REF",+        "type": "power_out",+        "description": "CODEC Internally Generated ADC Reference Voltage; connect via 0.1 µF ceramic and 22 µF tantalum/ceramic capacitor to AVSS."+      },+      {+        "number": "33",+        "name": "EP",+        "type": "passive",+        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.2",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.2",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-4-6",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [+          "extractor flagged: GPIO pins with dual functions (GPIO20/SDI0, GPIO00/DCLK, GPIO01/SYNC) classified by primary audio in; Strap pins (GPO06/nTEST, GPO07/REF, GPO18/I2CMS) sampled during power-up reset; alternate input func",+          "exposed pad 33 added from the footprint",+          "dropped thermal pad ['EP'] absent from footprint",+          "6/33 pins cited to the wrong page (name found elsewhere): ['15:LIN2@p10', '16:LOUT2@p10', '19:VCM@p10', '21:AVDD@p10']"+        ],+        "pages_sent": 30,+        "cost_usd": 0.694,+        "at": "2026-09-22T11:32:49"+      },+      "datasheet": {+        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588883888634802176",+        "pages": 30,+        "sha256": "89dd1b86e8fddb6b",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 33,+        "described": 33,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file