← Commit history

npca110ba0yx: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding)

Ray ·3d48264945 · ·parent 6f077b1
2 files changed +99−19
package.json+57−17
@@ -65,7 +65,7 @@         "number": "3",         "name": "VD18",         "type": "power_in",-        "description": "Internal 1.8V Supply for internal logic; requires 4.7 \u00b5F ceramic capacitor to digital ground."+        "description": "Internal 1.8V Supply for internal logic; requires 4.7 µF ceramic capacitor to digital ground."       },       {         "number": "4",@@ -77,13 +77,13 @@         "number": "5",         "name": "VSSP",         "type": "power_in",-        "description": "PLL Ground; connect to digital ground plane via 0 \u03a9 resistor."+        "description": "PLL Ground; connect to digital ground plane via 0 Ω resistor."       },       {         "number": "6",         "name": "VPLL18",         "type": "power_in",-        "description": "PLL 1.8V Supply internally generated; requires 4.7 \u00b5F ceramic capacitor to VSSP."+        "description": "PLL 1.8V Supply internally generated; requires 4.7 µF ceramic capacitor to VSSP."       },       {         "number": "7",@@ -119,25 +119,25 @@         "number": "12",         "name": "RIN1",         "type": "input",-        "description": "Analog-to-Digital Converter Input Pair 1 Right Input; requires AC coupling with 1 \u00b5F (or 0.33 \u00b5F) capacitor."+        "description": "Analog-to-Digital Converter Input Pair 1 Right Input; requires AC coupling with 1 µF (or 0.33 µF) capacitor."       },       {         "number": "13",         "name": "LIN1",         "type": "input",-        "description": "Analog-to-Digital Converter Input Pair 1 Left Input; requires AC coupling with 1 \u00b5F (or 0.33 \u00b5F) capacitor."+        "description": "Analog-to-Digital Converter Input Pair 1 Left Input; requires AC coupling with 1 µF (or 0.33 µF) capacitor."       },       {         "number": "14",         "name": "RIN2",         "type": "input",-        "description": "Analog-to-Digital Converter Input Pair 2 Right Input; requires AC coupling with 1 \u00b5F (or 0.33 \u00b5F) capacitor."+        "description": "Analog-to-Digital Converter Input Pair 2 Right Input; requires AC coupling with 1 µF (or 0.33 µF) capacitor."       },       {         "number": "15",         "name": "LIN2",         "type": "input",-        "description": "Analog-to-Digital Converter Input Pair 2 Left Input; requires AC coupling with 1 \u00b5F (or 0.33 \u00b5F) capacitor."+        "description": "Analog-to-Digital Converter Input Pair 2 Left Input; requires AC coupling with 1 µF (or 0.33 µF) capacitor."       },       {         "number": "16",@@ -155,13 +155,13 @@         "number": "18",         "name": "DAC_REF",         "type": "power_out",-        "description": "CODEC Internally Generated DAC Reference Voltage; connect via 0.1 \u00b5F ceramic and 22 \u00b5F tantalum/ceramic capacitor to AVSS."+        "description": "CODEC Internally Generated DAC Reference Voltage; connect via 0.1 µF ceramic and 22 µF tantalum/ceramic capacitor to AVSS."       },       {         "number": "19",         "name": "VCM",         "type": "power_out",-        "description": "CODEC Internally Generated Common-Mode Voltage; connect via 0.1 \u00b5F ceramic and 22 \u00b5F tantalum/ceramic capacitor to AVSS."+        "description": "CODEC Internally Generated Common-Mode Voltage; connect via 0.1 µF ceramic and 22 µF tantalum/ceramic capacitor to AVSS."       },       {         "number": "20",@@ -173,7 +173,7 @@         "number": "21",         "name": "AVDD",         "type": "power_in",-        "description": "CODEC Analog 3.3V Supply (3.00V to 3.47V); requires 0.1 \u00b5F ceramic and 22 \u00b5F bypass capacitors to AVSS."+        "description": "CODEC Analog 3.3V Supply (3.00V to 3.47V); requires 0.1 µF ceramic and 22 µF bypass capacitors to AVSS."       },       {         "number": "22",@@ -191,19 +191,19 @@         "number": "24",         "name": "GPO07/CLKOUT/REF",         "type": "output",-        "description": "General-Purpose Clock Output that also functions as Reference strap sampled during power-up reset; 5V tolerant with pull-up; requires 33-100 \u03a9 series resistor when used as output."+        "description": "General-Purpose Clock Output that also functions as Reference strap sampled during power-up reset; 5V tolerant with pull-up; requires 33-100 Ω series resistor when used as output."       },       {         "number": "25",         "name": "GPO06/SDO0/nTEST",         "type": "output",-        "description": "I2S Serial Data Out 0 carrying stereo output stream that also functions as test strap sampled during power-up reset; 5V tolerant with pull-up; requires 33-100 \u03a9 series resistor."+        "description": "I2S Serial Data Out 0 carrying stereo output stream that also functions as test strap sampled during power-up reset; 5V tolerant with pull-up; requires 33-100 Ω series resistor."       },       {         "number": "26",         "name": "GPIO01/SYNC",         "type": "bidirectional",-        "description": "I2S SYNC input for slave mode or output for master mode indicating sample frequency; 5V tolerant bidirectional with pull-up; requires 33-100 \u03a9 series resistor when used as output."+        "description": "I2S SYNC input for slave mode or output for master mode indicating sample frequency; 5V tolerant bidirectional with pull-up; requires 33-100 Ω series resistor when used as output."       },       {         "number": "27",@@ -215,7 +215,7 @@         "number": "28",         "name": "GPIO00/DCLK",         "type": "bidirectional",-        "description": "I2S Clock input for slave mode or output for master mode (32x or 64x sample frequency); 5V tolerant bidirectional with pull-up; requires 33-100 \u03a9 series resistor when used as output."+        "description": "I2S Clock input for slave mode or output for master mode (32x or 64x sample frequency); 5V tolerant bidirectional with pull-up; requires 33-100 Ω series resistor when used as output."       },       {         "number": "29",@@ -239,7 +239,7 @@         "number": "32",         "name": "ADC_REF",         "type": "power_out",-        "description": "CODEC Internally Generated ADC Reference Voltage; connect via 0.1 \u00b5F ceramic and 22 \u00b5F tantalum/ceramic capacitor to AVSS."+        "description": "CODEC Internally Generated ADC Reference Voltage; connect via 0.1 µF ceramic and 22 µF tantalum/ceramic capacitor to AVSS."       },       {         "number": "33",@@ -285,6 +285,46 @@     "viewers": {       "symbol": "viewers/symbol.html",       "footprint": "viewers/footprint.html"-    }+    },+    "models_3d": [+      {+        "file": "npca110ba0yx.step",+        "role": "plain",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          5.0,+          5.0,+          0.875+        ],+        "zmin_mm": 0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "5fa713ea46b36980895812ed853577889b7cb06d275041a39b99bc0be305dc79",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      },+      {+        "file": "npca110ba0yx-etched.step",+        "role": "eda",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          5.0,+          5.0,+          0.875+        ],+        "zmin_mm": 0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "a51659c0f0745d991aa7b2968647f7d47c3734016607b50ca5241dd800f2f485",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      }+    ]   }-}\ No newline at end of file+}
page.json+42−2
@@ -270,7 +270,47 @@     "viewers": {       "symbol": "viewers/symbol.html",       "footprint": "viewers/footprint.html"-    }+    },+    "models_3d": [+      {+        "file": "npca110ba0yx.step",+        "role": "plain",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          5.0,+          5.0,+          0.875+        ],+        "zmin_mm": 0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "5fa713ea46b36980895812ed853577889b7cb06d275041a39b99bc0be305dc79",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      },+      {+        "file": "npca110ba0yx-etched.step",+        "role": "eda",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          5.0,+          5.0,+          0.875+        ],+        "zmin_mm": 0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "a51659c0f0745d991aa7b2968647f7d47c3734016607b50ca5241dd800f2f485",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      }+    ]   },   "metadata": {     "specs": {@@ -318,4 +358,4 @@     "public": true   },   "updated_at": "2026-09-25T03:13:47.823Z"-}\ No newline at end of file+}