component
NLV17SZ125DFT2G
Public Made by Adomby adom
onsemi Buffers, Drivers, Receivers, Transceivers, SOT-353. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
NLV17SZ125DFT2G
onsemi · Buffers, Drivers, Receivers, Transceivers · SOT-353
NLV17SZ125DFT2G from onsemi, in a SOT-353. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OE | input | Output enable input: per the function table, OE low enables the buffer so Y follows A, and OE high puts Y in the high-impedance (Z) state. |
| 2 | A | input | Data input of the non-inverting buffer; inputs are overvoltage tolerant up to 5.5 V and support partial power-down protection (IOFF). |
| 3 | GND | power_in | Ground reference pin for the device. |
| 4 | Y | tri_state | Buffered 3-state output that follows A when enabled and is high-impedance when OE is high; rated for source/sink 24 mA at 3.0 V. |
| 5 | VCC | power_in | Positive supply pin; the device is designed for VCC operation from 1.65 V to 5.5 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | onsemi |
| Package | SOT-353 |
| Category | Logic |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Positive DC Supply Voltage | VCC | 1.65 | 5.5 | V | 4 | ||
| DC Input Voltage | VIN | 0 | 5.5 | V | 4 | ||
| DC Output Voltage | VOUT | 0 | V | Active-Mode (High or Low State) | 4 | ||
| DC Output Voltage | VOUT | 0 | 5.5 | V | Tri-State Mode (Note 1) | 4 | |
| Operating Temperature Range | TA | -55 | 125 | °C | 4 | ||
| Input Rise and Fall Time | tr, tf | 0 | 100 | ns/V | VCC = 3.0 V to 3.6 V; TSOP-5, SC-88A (NLV) | 4 | |
| Input Rise and Fall Time | tr, tf | 0 | 20 | ns/V | VCC = 4.5 V to 5.5 V; TSOP-5, SC-88A (NLV) | 4 | |
| DC Supply Voltage | VCC | -0.5 | 7 | V | TSOP-5, SC-88A (NLV) | 3 | |
| DC Input Voltage | VIN | -0.5 | 7 | V | TSOP-5, SC-88A (NLV) | 3 | |
| DC Output Voltage | VOUT | -0.5 | V | Active-Mode (High or Low State); TSOP-5, SC-88A (NLV) | 3 | ||
| DC Output Voltage | VOUT | -0.5 | 7 | V | Tri-State Mode (Note 1); TSOP-5, SC-88A (NLV) | 3 | |
| DC Input Diode Current | IIK | -50 | mA | VIN < GND | 3 | ||
| DC Output Diode Current | IOK | -50 | mA | VOUT < GND | 3 | ||
| DC Output Source/Sink Current | IOUT | -50 | 50 | mA | 3 | ||
| DC Supply Current per Supply Pin or Ground Pin | ICC or IGND | -100 | 100 | mA | 3 | ||
| Storage Temperature Range | TSTG | -65 | 150 | °C | 3 | ||
| Lead Temperature | TL | 260 | °C | 1 mm from case for 10 secs | 3 | ||
| Junction Temperature Under Bias | TJ | 150 | °C | 3 | |||
| ESD Withstand Voltage | VESD | 2000 | V | Human Body Model | 3 | ||
| ESD Withstand Voltage | VESD | 1000 | V | Charged Device Model | 3 | ||
| Latchup Performance | ILatchup | 100 | mA | Tested to EIA/JESD78 Class II | 3 | ||
| Thermal Resistance, Junction-to-Ambient | JA | 377 | °C/W | SC-88A; minimum pad spacing on FR4, JESD51-7 (Note 2) | 3 | ||
| Power Dissipation in Still Air | PD | 332 | mW | SC-88A, still air | 3 | ||
| High-Level Output Voltage | VOH | 1.29 | V | VIN = VIH or VIL; IOH = -4 mA; VCC = 1.65 V; TA = -55°C to 125°C | 4 | ||
| High-Level Output Voltage | VOH | 1.9 | V | VIN = VIH or VIL; IOH = -8 mA; VCC = 2.3 V; TA = -55°C to 125°C | 4 | ||
| High-Level Output Voltage | VOH | 2.2 | V | VIN = VIH or VIL; IOH = -12 mA; VCC = 2.7 V; TA = -55°C to 125°C | 4 | ||
| High-Level Output Voltage | VOH | 2.4 | V | VIN = VIH or VIL; IOH = -16 mA; VCC = 3.0 V; TA = -55°C to 125°C | 4 | ||
| High-Level Output Voltage | VOH | 2.3 | V | VIN = VIH or VIL; IOH = -24 mA; VCC = 3.0 V; TA = -55°C to 125°C | 4 | ||
| High-Level Output Voltage | VOH | 3.8 | V | VIN = VIH or VIL; IOH = -32 mA; VCC = 4.5 V; TA = -55°C to 125°C | 4 | ||
| Low-Level Output Voltage | VOL | 0.1 | V | VIN = VIH or VIL; IOL = 100 µA; VCC = 1.65 V to 5.5 V; TA = -55°C to 125°C | 4 | ||
| Low-Level Output Voltage | VOL | 0.24 | V | VIN = VIH or VIL; IOL = 4 mA; VCC = 1.65 V; TA = -55°C to 125°C | 4 | ||
| Low-Level Output Voltage | VOL | 0.3 | V | VIN = VIH or VIL; IOL = 8 mA; VCC = 2.3 V; TA = -55°C to 125°C | 4 | ||
| Low-Level Output Voltage | VOL | 0.4 | V | VIN = VIH or VIL; IOL = 12 mA; VCC = 2.7 V; TA = -55°C to 125°C | 4 | ||
| Low-Level Output Voltage | VOL | 0.55 | V | VIN = VIH or VIL; IOL = 24 mA; VCC = 3.0 V; TA = -55°C to 125°C | 4 | ||
| Input Leakage Current | IIN | -0.1 | 0.1 | µA | VIN = 5.5 V or GND; VCC = 1.65 to 5.5 V; TA = 25°C | 4 | |
| Input Leakage Current | IIN | -1 | 1 | µA | VIN = 5.5 V or GND; VCC = 1.65 to 5.5 V; TA = -55°C to 125°C | 4 | |
| 3-State Output Leakage Current | IOZ | -0.5 | 0.5 | µA | VOUT = 0 V to 5.5 V; VCC = 1.65 to 5.5 V; TA = 25°C | 4 | |
| 3-State Output Leakage Current | IOZ | -5 | 5 | µA | VOUT = 0 V to 5.5 V; VCC = 1.65 to 5.5 V; TA = -55°C to 125°C | 4 | |
| Power Off Leakage Current | IOFF | 1 | µA | VIN = 5.5 V or VOUT = 5.5 V; VCC = 0 V; TA = 25°C | 4 | ||
| Power Off Leakage Current | IOFF | 10 | µA | VIN = 5.5 V or VOUT = 5.5 V; VCC = 0 V; TA = -55°C to 125°C | 4 | ||
| Quiescent Supply Current | ICC | 1 | µA | VIN = VCC or GND; VCC = 5.5 V; TA = 25°C | 4 | ||
| Quiescent Supply Current | ICC | 10 | µA | VIN = VCC or GND; VCC = 5.5 V; TA = -55°C to 125°C | 4 | ||
| Propagation Delay, A to Y | tPLH, tPHL | 10.5 | ns | RL = 1 MΩ, CL = 15 pF; VCC = 1.65 to 1.95 V; TA = -55°C to 125°C | 5 | ||
| Propagation Delay, A to Y | tPLH, tPHL | 8 | ns | RL = 1 MΩ, CL = 15 pF; VCC = 2.3 to 2.7 V; TA = -55°C to 125°C | 5 | ||
| Propagation Delay, A to Y | tPLH, tPHL | 5.5 | ns | RL = 1 MΩ, CL = 15 pF; VCC = 3.0 to 3.6 V; TA = -55°C to 125°C | 5 | ||
| Propagation Delay, A to Y | tPLH, tPHL | 6 | ns | RL = 500 Ω, CL = 50 pF; VCC = 3.0 to 3.6 V; TA = -55°C to 125°C | 5 | ||
| Propagation Delay, A to Y | tPLH, tPHL | 4.8 | ns | RL = 1 MΩ, CL = 15 pF; VCC = 4.5 to 5.5 V; TA = -55°C to 125°C | 5 | ||
| Propagation Delay, A to Y | tPLH, tPHL | 5.3 | ns | RL = 500 Ω, CL = 50 pF; VCC = 4.5 to 5.5 V; TA = -55°C to 125°C | 5 | ||
| Output Enable Time, OE to Y | tPZH, tPZL | 10 | ns | VCC = 1.65 to 1.95 V; TA = -55°C to 125°C | 5 | ||
| Output Enable Time, OE to Y | tPZH, tPZL | 9 | ns | VCC = 2.3 to 2.7 V; TA = -55°C to 125°C | 5 | ||
| Output Enable Time, OE to Y | tPZH, tPZL | 6.5 | ns | VCC = 3.0 to 3.6 V; TA = -55°C to 125°C | 5 | ||
| Output Enable Time, OE to Y | tPZH, tPZL | 5.8 | ns | VCC = 4.5 to 5.5 V; TA = -55°C to 125°C | 5 | ||
| Output Disable Time, OE to Y | tPHZ, tPLZ | 10.5 | ns | VCC = 1.65 to 1.95 V; TA = -55°C to 125°C | 5 | ||
| Output Disable Time, OE to Y | tPHZ, tPLZ | 8.5 | ns | VCC = 2.3 to 2.7 V; TA = -55°C to 125°C | 5 | ||
| Output Disable Time, OE to Y | tPHZ, tPLZ | 6 | ns | VCC = 3.0 to 3.6 V; TA = -55°C to 125°C | 5 | ||
| Output Disable Time, OE to Y | tPHZ, tPLZ | 5 | ns | VCC = 4.5 to 5.5 V; TA = -55°C to 125°C | 5 |
CAD (KiCad official)
- Symbol:
NLV17SZ125DFT2G - Footprint:
Package_TO_SOT_SMD:SOT-353_SC-70-5 - 3D model: SOT-353 (KiCad packages3D, STEP)
- 3D model files:
nlv17sz125dft2g-etched.step/nlv17sz125dft2g-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);nlv17sz125dft2g.step/nlv17sz125dft2g.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: onsemi datasheet (14 pp, sha256
14d6f38b554ad63c, retrieved 2026-10-18, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# NLV17SZ125DFT2G
**onsemi** · Buffers, Drivers, Receivers, Transceivers · SOT-353
NLV17SZ125DFT2G from onsemi, in a SOT-353. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OE | input | Output enable input: per the function table, OE low enables the buffer so Y follows A, and OE high puts Y in the high-impedance (Z) state. |
| 2 | A | input | Data input of the non-inverting buffer; inputs are overvoltage tolerant up to 5.5 V and support partial power-down protection (IOFF). |
| 3 | GND | power_in | Ground reference pin for the device. |
| 4 | Y | tri_state | Buffered 3-state output that follows A when enabled and is high-impedance when OE is high; rated for source/sink 24 mA at 3.0 V. |
| 5 | VCC | power_in | Positive supply pin; the device is designed for VCC operation from 1.65 V to 5.5 V. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | onsemi |
| Package | SOT-353 |
| Category | Logic |
| Pins | 5 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Positive DC Supply Voltage | VCC | 1.65 | | 5.5 | V | | 4 |
| DC Input Voltage | VIN | 0 | | 5.5 | V | | 4 |
| DC Output Voltage | VOUT | 0 | | | V | Active-Mode (High or Low State) | 4 |
| DC Output Voltage | VOUT | 0 | | 5.5 | V | Tri-State Mode (Note 1) | 4 |
| Operating Temperature Range | TA | -55 | | 125 | °C | | 4 |
| Input Rise and Fall Time | tr, tf | 0 | | 100 | ns/V | VCC = 3.0 V to 3.6 V; TSOP-5, SC-88A (NLV) | 4 |
| Input Rise and Fall Time | tr, tf | 0 | | 20 | ns/V | VCC = 4.5 V to 5.5 V; TSOP-5, SC-88A (NLV) | 4 |
| DC Supply Voltage | VCC | -0.5 | | 7 | V | TSOP-5, SC-88A (NLV) | 3 |
| DC Input Voltage | VIN | -0.5 | | 7 | V | TSOP-5, SC-88A (NLV) | 3 |
| DC Output Voltage | VOUT | -0.5 | | | V | Active-Mode (High or Low State); TSOP-5, SC-88A (NLV) | 3 |
| DC Output Voltage | VOUT | -0.5 | | 7 | V | Tri-State Mode (Note 1); TSOP-5, SC-88A (NLV) | 3 |
| DC Input Diode Current | IIK | | | -50 | mA | VIN < GND | 3 |
| DC Output Diode Current | IOK | | | -50 | mA | VOUT < GND | 3 |
| DC Output Source/Sink Current | IOUT | -50 | | 50 | mA | | 3 |
| DC Supply Current per Supply Pin or Ground Pin | ICC or IGND | -100 | | 100 | mA | | 3 |
| Storage Temperature Range | TSTG | -65 | | 150 | °C | | 3 |
| Lead Temperature | TL | | | 260 | °C | 1 mm from case for 10 secs | 3 |
| Junction Temperature Under Bias | TJ | | | 150 | °C | | 3 |
| ESD Withstand Voltage | VESD | 2000 | | | V | Human Body Model | 3 |
| ESD Withstand Voltage | VESD | 1000 | | | V | Charged Device Model | 3 |
| Latchup Performance | ILatchup | | | 100 | mA | Tested to EIA/JESD78 Class II | 3 |
| Thermal Resistance, Junction-to-Ambient | JA | | | 377 | °C/W | SC-88A; minimum pad spacing on FR4, JESD51-7 (Note 2) | 3 |
| Power Dissipation in Still Air | PD | | | 332 | mW | SC-88A, still air | 3 |
| High-Level Output Voltage | VOH | 1.29 | | | V | VIN = VIH or VIL; IOH = -4 mA; VCC = 1.65 V; TA = -55°C to 125°C | 4 |
| High-Level Output Voltage | VOH | 1.9 | | | V | VIN = VIH or VIL; IOH = -8 mA; VCC = 2.3 V; TA = -55°C to 125°C | 4 |
| High-Level Output Voltage | VOH | 2.2 | | | V | VIN = VIH or VIL; IOH = -12 mA; VCC = 2.7 V; TA = -55°C to 125°C | 4 |
| High-Level Output Voltage | VOH | 2.4 | | | V | VIN = VIH or VIL; IOH = -16 mA; VCC = 3.0 V; TA = -55°C to 125°C | 4 |
| High-Level Output Voltage | VOH | 2.3 | | | V | VIN = VIH or VIL; IOH = -24 mA; VCC = 3.0 V; TA = -55°C to 125°C | 4 |
| High-Level Output Voltage | VOH | 3.8 | | | V | VIN = VIH or VIL; IOH = -32 mA; VCC = 4.5 V; TA = -55°C to 125°C | 4 |
| Low-Level Output Voltage | VOL | | | 0.1 | V | VIN = VIH or VIL; IOL = 100 µA; VCC = 1.65 V to 5.5 V; TA = -55°C to 125°C | 4 |
| Low-Level Output Voltage | VOL | | | 0.24 | V | VIN = VIH or VIL; IOL = 4 mA; VCC = 1.65 V; TA = -55°C to 125°C | 4 |
| Low-Level Output Voltage | VOL | | | 0.3 | V | VIN = VIH or VIL; IOL = 8 mA; VCC = 2.3 V; TA = -55°C to 125°C | 4 |
| Low-Level Output Voltage | VOL | | | 0.4 | V | VIN = VIH or VIL; IOL = 12 mA; VCC = 2.7 V; TA = -55°C to 125°C | 4 |
| Low-Level Output Voltage | VOL | | | 0.55 | V | VIN = VIH or VIL; IOL = 24 mA; VCC = 3.0 V; TA = -55°C to 125°C | 4 |
| Input Leakage Current | IIN | -0.1 | | 0.1 | µA | VIN = 5.5 V or GND; VCC = 1.65 to 5.5 V; TA = 25°C | 4 |
| Input Leakage Current | IIN | -1 | | 1 | µA | VIN = 5.5 V or GND; VCC = 1.65 to 5.5 V; TA = -55°C to 125°C | 4 |
| 3-State Output Leakage Current | IOZ | -0.5 | | 0.5 | µA | VOUT = 0 V to 5.5 V; VCC = 1.65 to 5.5 V; TA = 25°C | 4 |
| 3-State Output Leakage Current | IOZ | -5 | | 5 | µA | VOUT = 0 V to 5.5 V; VCC = 1.65 to 5.5 V; TA = -55°C to 125°C | 4 |
| Power Off Leakage Current | IOFF | | | 1 | µA | VIN = 5.5 V or VOUT = 5.5 V; VCC = 0 V; TA = 25°C | 4 |
| Power Off Leakage Current | IOFF | | | 10 | µA | VIN = 5.5 V or VOUT = 5.5 V; VCC = 0 V; TA = -55°C to 125°C | 4 |
| Quiescent Supply Current | ICC | | | 1 | µA | VIN = VCC or GND; VCC = 5.5 V; TA = 25°C | 4 |
| Quiescent Supply Current | ICC | | | 10 | µA | VIN = VCC or GND; VCC = 5.5 V; TA = -55°C to 125°C | 4 |
| Propagation Delay, A to Y | tPLH, tPHL | | | 10.5 | ns | RL = 1 MΩ, CL = 15 pF; VCC = 1.65 to 1.95 V; TA = -55°C to 125°C | 5 |
| Propagation Delay, A to Y | tPLH, tPHL | | | 8 | ns | RL = 1 MΩ, CL = 15 pF; VCC = 2.3 to 2.7 V; TA = -55°C to 125°C | 5 |
| Propagation Delay, A to Y | tPLH, tPHL | | | 5.5 | ns | RL = 1 MΩ, CL = 15 pF; VCC = 3.0 to 3.6 V; TA = -55°C to 125°C | 5 |
| Propagation Delay, A to Y | tPLH, tPHL | | | 6 | ns | RL = 500 Ω, CL = 50 pF; VCC = 3.0 to 3.6 V; TA = -55°C to 125°C | 5 |
| Propagation Delay, A to Y | tPLH, tPHL | | | 4.8 | ns | RL = 1 MΩ, CL = 15 pF; VCC = 4.5 to 5.5 V; TA = -55°C to 125°C | 5 |
| Propagation Delay, A to Y | tPLH, tPHL | | | 5.3 | ns | RL = 500 Ω, CL = 50 pF; VCC = 4.5 to 5.5 V; TA = -55°C to 125°C | 5 |
| Output Enable Time, OE to Y | tPZH, tPZL | | | 10 | ns | VCC = 1.65 to 1.95 V; TA = -55°C to 125°C | 5 |
| Output Enable Time, OE to Y | tPZH, tPZL | | | 9 | ns | VCC = 2.3 to 2.7 V; TA = -55°C to 125°C | 5 |
| Output Enable Time, OE to Y | tPZH, tPZL | | | 6.5 | ns | VCC = 3.0 to 3.6 V; TA = -55°C to 125°C | 5 |
| Output Enable Time, OE to Y | tPZH, tPZL | | | 5.8 | ns | VCC = 4.5 to 5.5 V; TA = -55°C to 125°C | 5 |
| Output Disable Time, OE to Y | tPHZ, tPLZ | | | 10.5 | ns | VCC = 1.65 to 1.95 V; TA = -55°C to 125°C | 5 |
| Output Disable Time, OE to Y | tPHZ, tPLZ | | | 8.5 | ns | VCC = 2.3 to 2.7 V; TA = -55°C to 125°C | 5 |
| Output Disable Time, OE to Y | tPHZ, tPLZ | | | 6 | ns | VCC = 3.0 to 3.6 V; TA = -55°C to 125°C | 5 |
| Output Disable Time, OE to Y | tPHZ, tPLZ | | | 5 | ns | VCC = 4.5 to 5.5 V; TA = -55°C to 125°C | 5 |
## CAD (KiCad official)
- Symbol: `NLV17SZ125DFT2G`
- Footprint: `Package_TO_SOT_SMD:SOT-353_SC-70-5`
- 3D model: SOT-353 (KiCad packages3D, STEP)
- 3D model files: `nlv17sz125dft2g-etched.step` / `nlv17sz125dft2g-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `nlv17sz125dft2g.step` / `nlv17sz125dft2g.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [onsemi datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588876971757473792) (14 pp, sha256 `14d6f38b554ad63c`, retrieved 2026-10-18, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/nlv17sz125dft2g-datasheet.pdf)