Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

NLAS3899BMNTXG

onsemi · Analog Switches, Multiplexers · QFN-16-EP(3x3)

NLAS3899BMNTXG from onsemi, in a QFN-16-EP(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 NCA passive Independent channel A normally-closed analog port; connects to COMA when A−B IN is low, with signal voltage limited to GND to VCC and continuous current rated ±300 mA when closed.
2 A−B IN input Control input for channels A and B (high selects NO, low selects NC); recommended range GND to 4.3 V, absolute maximum −0.5 to 5.5 V and input current ±20 mA.
3 NOB passive Independent channel B normally-open analog port; connects to COMB when A−B IN is high, with signal voltage limited to GND to VCC and continuous current rated ±300 mA when closed.
4 COMB passive Common analog port of channel B, switched to NOB or NCB by A−B IN, with signal voltage limited to GND to VCC.
5 NCB passive Independent channel B normally-closed analog port; connects to COMB when A−B IN is low, with signal voltage limited to GND to VCC and continuous current rated ±300 mA when closed.
6 GND power_in Ground reference pin for the device; analog signals are specified relative to GND to VCC.
7 NOC passive Independent channel C normally-open analog port; connects to COMC when C−D IN is high, with signal voltage limited to GND to VCC and continuous current rated ±300 mA when closed.
8 COMC passive Common analog port of channel C, switched to NOC or NCC by C−D IN, with signal voltage limited to GND to VCC.
9 NCC passive Independent channel C normally-closed analog port; connects to COMC when C−D IN is low, with signal voltage limited to GND to VCC and continuous current rated ±300 mA when closed.
10 C−D IN input Control input for channels C and D (high selects NO, low selects NC); recommended range GND to 4.3 V, absolute maximum −0.5 to 5.5 V and input current ±20 mA.
11 NOD passive Independent channel D normally-open analog port; connects to COMD when C−D IN is high, with signal voltage limited to GND to VCC and continuous current rated ±300 mA when closed.
12 COMD passive Common analog port of channel D, switched to NOD or NCD by C−D IN, with signal voltage limited to GND to VCC.
13 NCD passive Independent channel D normally-closed analog port; connects to COMD when C−D IN is low, with signal voltage limited to GND to VCC and continuous current rated ±300 mA when closed.
14 VCC power_in Positive supply voltage; recommended operating range 1.65 to 4.3 V, absolute maximum −0.5 to +5.5 V.
15 NOA passive Independent channel A normally-open analog port; connects to COMA when A−B IN is high, with signal voltage limited to GND to VCC and continuous current rated ±300 mA when closed.
16 COMA passive Common analog port of channel A, switched to NOA or NCA by A−B IN, with signal voltage limited to GND to VCC.
17 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer onsemi
Package QFN-16-EP(3x3)
Category Interface
Pins 17

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Positive DC Supply Voltage VCC 1.65 4.3 V 3
Control Input Voltage VIN 4.3 V 3
Operating Temperature Range TA -40 85 °C 3
Positive DC Supply Voltage VCC -0.5 5.5 V 2
Analog Signal Voltage VIS -0.5 V upper limit printed as VCC + 0.5 2
Control Input Voltage VIN -0.5 5.5 V 2
Analog Signal Continuous Current IIS_CON -300 300 mA Closed switch 2
Analog Signal Peak Current IIS_PK -500 500 mA 10% duty cycle 2
Control Input Current IIN -20 20 mA 2
Storage Temperature Range TSTG -65 150 °C 2
Control Input High VIH 1.3 V VCC = 3.0 V 4
Control Input High VIH 1.6 V VCC = 4.3 V 4
Control Input Low VIL 0.5 V VCC = 3.0 V 4
Control Input Low VIL 0.6 V VCC = 4.3 V 4
Control Input Leakage IIN -1 0.1 1 µA 0 ≤ VIN ≤ VCC; VCC = 4.3 V 4
VCC Quiescent Supply Current ICC -2 1 2 µA VIN and VIS = VCC or GND; ID = 0 A; VCC = 1.65 − 4.3 V 4
Power Off Leakage IOFF -2 0.5 2 µA VIN = 4.3 V or GND; VCC = 0 V 4
NCx, NOx OFF State Leakage INO/NC (OFF) -300 10 300 nA VIN = VIL or VIH; VNC/NO = 0.3 V; VCOM = 4.0 V; VCC = 4.3 V 4
COMx ON State Leakage ICOM (ON) -300 10 300 nA VIN = VIL or VIH; VNO = 0.3 V or 4.0 V; VCOM = 0.3 V or 4.0 V; VCC = 4.3 V 4
ON Resistance RON 3 4 Ω VCC = 2.5 V; ION = −100 mA; VIS = 0 to VCC 4
ON Resistance RON 2.6 3 Ω VCC = 3.0 V; ION = −100 mA; VIS = 0 to VCC 4
ON Resistance RON 2.5 3 Ω VCC = 3.6 V; ION = −100 mA; VIS = 0 to VCC 4
ON Resistance RON 2.2 2.5 Ω VCC = 4.3 V; ION = −100 mA; VIS = 0 to VCC 4
RON Flatness RFLAT 0.8 Ω VCC = 3.0 V; ION = −100 mA; VIS = 0 to VCC 4
RON Flatness RFLAT 1.1 Ω VCC = 4.3 V; ION = −100 mA; VIS = 0 to VCC 4
RON Matching RON 0.8 Ω VCC = 3.0 V; ION = −100 mA; VIS = 0 to VCC 4
RON Matching RON 0.7 Ω VCC = 4.3 V; ION = −100 mA; VIS = 0 to VCC 4
Turn On Time tON 30 40 ns VCC = 2.3 to 4.3 V; RL = 50 Ω, CL = 35 pF, f = 1 MHz 5
Turn Off Time tOFF 20 30 ns VCC = 2.3 to 4.53 V as printed; RL = 50 Ω, CL = 35 pF, f = 1 MHz 5
Break Before Make tBBM 2 15 ns VCC = 3.0 V; RL = 50 Ω, CL = 35 pF, f = 1 MHz 5

CAD (KiCad official)

  • Symbol: NLAS3899BMNTXG
  • Footprint: Package_DFN_QFN:QFN-16-1EP_3x3mm_P0.5mm_EP1.7x1.7mm
  • 3D model: QFN-16-EP(3x3) (KiCad packages3D, STEP)
  • 3D model files: nlas3899bmntxg-etched.step / nlas3899bmntxg-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); nlas3899bmntxg.step / nlas3899bmntxg.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: onsemi datasheet (11 pp, sha256 a8a362b50b9921de, retrieved 2026-10-18, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF