component
NL27WZ17DFT2G
Public Made by Adomby adom
onsemi Buffers, Drivers, Receivers, Transceivers, SC-70-6(SOT-363). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownNL27WZ17DFT2G
onsemi · Buffers, Drivers, Receivers, Transceivers · SC-70-6(SOT-363)
NL27WZ17DFT2G from onsemi, in a SC-70-6(SOT-363). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IN A1 | input | Buffer 1 data input; overvoltage tolerant, with a recommended input range of 0 to 5.5 V and an absolute maximum of -0.5 to +7.0 V. |
| 2 | GND | power_in | Ground reference pin for the device; the datasheet gives an absolute maximum ground current of ±100 mA per ground pin. |
| 3 | IN A2 | input | Buffer 2 data input; overvoltage tolerant, with a recommended input range of 0 to 5.5 V and an absolute maximum of -0.5 to +7.0 V. |
| 4 | OUT Y2 | output | Buffer 2 output; balanced 24 mA sink and source capability at VCC = 3.0 V, with a recommended output voltage range of 0 to 5.5 V. |
| 5 | VCC | power_in | Positive supply pin; recommended operating supply range is 1.65 V to 5.5 V, with an absolute maximum of -0.5 to +7.0 V. |
| 6 | OUT Y1 | output | Buffer 1 output; balanced 24 mA sink and source capability at VCC = 3.0 V, with a recommended output voltage range of 0 to 5.5 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | onsemi |
| Package | SC-70-6(SOT-363) |
| Category | Logic |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Positive Input Threshold Voltage | VT | 0.6 | 1 | 1.4 | V | VCC = 1.65 V; typ at TA = 25°C; min/max over −55°C to 125°C | 3 |
| Positive Input Threshold Voltage | VT | 1 | 1.5 | 1.8 | V | VCC = 2.3 V; typ at TA = 25°C; min/max over −55°C to 125°C | 3 |
| Positive Input Threshold Voltage | VT | 1.2 | 1.7 | 2 | V | VCC = 2.7 V; typ at TA = 25°C; min/max over −55°C to 125°C | 3 |
| Positive Input Threshold Voltage | VT | 1.3 | 1.9 | 2.2 | V | VCC = 3.0 V; typ at TA = 25°C; min/max over −55°C to 125°C | 3 |
| Positive Input Threshold Voltage | VT | 1.9 | 2.7 | 3.1 | V | VCC = 4.5 V; typ at TA = 25°C; min/max over −55°C to 125°C | 3 |
| Positive Input Threshold Voltage | VT | 2.2 | 3.3 | 3.6 | V | VCC = 5.5 V; typ at TA = 25°C; min/max over −55°C to 125°C | 3 |
| Negative Input Threshold Voltage | VT− | 0.2 | 0.5 | 0.8 | V | VCC = 1.65 V; typ at TA = 25°C; min/max over −55°C to 125°C | 3 |
| Negative Input Threshold Voltage | VT− | 0.4 | 0.75 | 1.15 | V | VCC = 2.3 V; typ at TA = 25°C; min/max over −55°C to 125°C | 3 |
| Negative Input Threshold Voltage | VT− | 0.5 | 0.87 | 1.4 | V | VCC = 2.7 V; typ at TA = 25°C; min/max over −55°C to 125°C | 3 |
| Negative Input Threshold Voltage | VT− | 0.6 | 1 | 1.5 | V | VCC = 3.0 V; typ at TA = 25°C; min/max over −55°C to 125°C | 3 |
| Negative Input Threshold Voltage | VT− | 1 | 1.5 | 2 | V | VCC = 4.5 V; typ at TA = 25°C; min/max over −55°C to 125°C | 3 |
| Negative Input Threshold Voltage | VT− | 1.2 | 1.9 | 2.3 | V | VCC = 5.5 V; typ at TA = 25°C; min/max over −55°C to 125°C | 3 |
| Input Hysteresis Voltage | VH | 0.1 | 0.48 | 0.9 | V | VCC = 1.65 V; typ at TA = 25°C; min/max over −55°C to 125°C | 3 |
| Input Hysteresis Voltage | VH | 0.25 | 0.75 | 1.1 | V | VCC = 2.3 V; typ at TA = 25°C; min/max over −55°C to 125°C | 3 |
| Input Hysteresis Voltage | VH | 0.3 | 0.83 | 1.15 | V | VCC = 2.7 V; typ at TA = 25°C; min/max over −55°C to 125°C | 3 |
| Input Hysteresis Voltage | VH | 0.4 | 0.93 | 1.2 | V | VCC = 3.0 V; typ at TA = 25°C; min/max over −55°C to 125°C | 3 |
| Input Hysteresis Voltage | VH | 0.6 | 1.2 | 1.5 | V | VCC = 4.5 V; typ at TA = 25°C; min/max over −55°C to 125°C | 3 |
| Input Hysteresis Voltage | VH | 0.7 | 1.4 | 1.7 | V | VCC = 5.5 V; typ at TA = 25°C; min/max over −55°C to 125°C | 3 |
| High-Level Output Voltage | VOH | 1.29 | 1.52 | V | VIN = VIH or VIL; IOH = −3.0 mA; VCC = 1.65 V; typ at TA = 25°C; min over −55°C to 125°C | 3 | |
| High-Level Output Voltage | VOH | 1.9 | 2.1 | V | VIN = VIH or VIL; IOH = 8.0 mA; VCC = 2.3 V; typ at TA = 25°C; min over −55°C to 125°C | 3 | |
| High-Level Output Voltage | VOH | 2.2 | 2.4 | V | VIN = VIH or VIL; IOH = 12 mA; VCC = 2.7 V; typ at TA = 25°C; min over −55°C to 125°C | 3 | |
| High-Level Output Voltage | VOH | 2.4 | 2.7 | V | VIN = VIH or VIL; IOH = 16 mA; VCC = 3.0 V; typ at TA = 25°C; min over −55°C to 125°C | 3 | |
| High-Level Output Voltage | VOH | 2.3 | 2.5 | V | VIN = VIH or VIL; IOH = 24 mA; VCC = 3.0 V; typ at TA = 25°C; min over −55°C to 125°C | 3 | |
| High-Level Output Voltage | VOH | 3.8 | 4 | V | VIN = VIH or VIL; IOH = 32 mA; VCC = 4.5 V; typ at TA = 25°C; min over −55°C to 125°C | 3 | |
| Low-Level Output Voltage | VOL | 0.08 | 0.1 | V | VIN = VIH or VIL; IOL = 100 µA; VCC = 1.65 V to 5.5 V; typ at TA = 25°C; max over −55°C to 125°C | 3 | |
| Low-Level Output Voltage | VOL | 0.2 | 0.24 | V | VIN = VIH or VIL; IOL = 4.0 mA; VCC = 1.65 V; typ at TA = 25°C; max over −55°C to 125°C | 3 | |
| Low-Level Output Voltage | VOL | 0.22 | 0.3 | V | VIN = VIH or VIL; IOL = 8.0 mA; VCC = 2.3 V; typ at TA = 25°C; max over −55°C to 125°C | 3 | |
| Low-Level Output Voltage | VOL | 0.28 | 0.4 | V | VIN = VIH or VIL; IOL = 12 mA; VCC = 2.7 V; typ at TA = 25°C; max over −55°C to 125°C | 3 | |
| Low-Level Output Voltage | VOL | 0.38 | 0.4 | V | VIN = VIH or VIL; IOL = 16 mA; VCC = 3.0 V; typ at TA = 25°C; max over −55°C to 125°C | 3 | |
| Low-Level Output Voltage | VOL | 0.42 | 0.55 | V | VIN = VIH or VIL; IOL = 24 mA; VCC = 3.0 V; typ at TA = 25°C; max over −55°C to 125°C | 3 | |
| Low-Level Output Voltage | VOL | 0.55 | V | VIN = VIH or VIL; IOL = 32 mA; VCC = 4.5 V; max over −55°C to 125°C | 3 | ||
| Input Leakage Current | IIN | -1 | 1 | µA | VIN = 5.5 V or GND; VCC = 0 to 5.5 V; min/max over −55°C to 125°C | 3 | |
| Power Off Leakage Current | IOFF | 10 | µA | VIN = 5.5 V or VOUT = 5.5 V; VCC = 0 V; max over −55°C to 125°C | 3 | ||
| Quiescent Supply Current | ICC | 10 | µA | VIN = 5.5 V or GND; VCC = 5.5 V; max over −55°C to 125°C | 3 | ||
| Propagation Delay Input A to Y | tPLH, tPHL | 2 | 9.1 | 15.6 | ns | RL = 1.0 MΩ, CL = 15 pF; VCC = 1.65 V; input tr = tf = 3.0 ns; typ at TA = 25°C; min/max over −55°C to 125°C | 3 |
| Propagation Delay Input A to Y | tPLH, tPHL | 2 | 7.6 | 13 | ns | RL = 1.0 MΩ, CL = 15 pF; VCC = 1.8 V; input tr = tf = 3.0 ns; typ at TA = 25°C; min/max over −55°C to 125°C | 3 |
| Propagation Delay Input A to Y | tPLH, tPHL | 1 | 5 | 9.5 | ns | RL = 1.0 MΩ, CL = 15 pF; VCC = 2.5 V ±0.2 V; input tr = tf = 3.0 ns; typ at TA = 25°C; min/max over −55°C to 125°C | 3 |
| Propagation Delay Input A to Y | tPLH, tPHL | 1 | 3.7 | 6.5 | ns | RL = 1.0 MΩ, CL = 15 pF; VCC = 3.3 V ±0.3 V; input tr = tf = 3.0 ns; typ at TA = 25°C; min/max over −55°C to 125°C | 3 |
| Propagation Delay Input A to Y | tPLH, tPHL | 0.5 | 3.1 | 5.5 | ns | RL = 1.0 MΩ, CL = 15 pF; VCC = 5.0 V ±0.5 V; input tr = tf = 3.0 ns; typ at TA = 25°C; min/max over −55°C to 125°C | 3 |
| Propagation Delay Input A to Y | tPLH, tPHL | 1.5 | 4.4 | 7.5 | ns | RL = 500 Ω, CL = 50 pF; VCC = 3.3 V ±0.3 V; input tr = tf = 3.0 ns; typ at TA = 25°C; min/max over −55°C to 125°C | 3 |
| Propagation Delay Input A to Y | tPLH, tPHL | 0.8 | 3.7 | 6.2 | ns | RL = 500 Ω, CL = 50 pF; VCC = 5.0 V ±0.5 V; input tr = tf = 3.0 ns; typ at TA = 25°C; min/max over −55°C to 125°C | 3 |
| Supply Voltage Operating | VCC | 1.65 | 5.5 | V | Operating | 2 | |
| Supply Voltage Data Retention Only | VCC | 1.5 | 5.5 | V | Data Retention Only | 2 | |
| Input Voltage | VI | 0 | 5.5 | V | 2 | ||
| Output Voltage (High or LOW State) | VO | 0 | 5.5 | V | High or LOW state | 2 | |
| Operating Free-Air Temperature | TA | -55 | 125 | °C | 2 | ||
| Input Transition Rise or Fall Rate | t/V | 0 | ns/V | VCC = 2.5 V ±0.2 V, 3.0 V ±0.3 V, 5.0 V ±0.5 V; max printed as No Limit | 2 | ||
| DC Supply Voltage | VCC | -0.5 | 7 | V | 2 | ||
| DC Input Voltage | VI | -0.5 | 7 | V | 2 | ||
| DC Output Voltage, Output in Z or LOW State | VO | -0.5 | 7 | V | Output in Z or LOW state; IO absolute maximum rating must be observed | 2 | |
| DC Input Diode Current, VI < GND | IIK | -50 | mA | VI < GND | 2 | ||
| DC Output Diode Current, VO < GND | IOK | -50 | mA | VO < GND | 2 | ||
| DC Output Sink Current | IO | -50 | 50 | mA | 2 | ||
| DC Supply Current per Supply Pin | ICC | -100 | 100 | mA | per supply pin | 2 | |
| DC Ground Current per Ground Pin | IGND | -100 | 100 | mA | per ground pin | 2 | |
| Storage Temperature Range | TSTG | -65 | 150 | °C | 2 | ||
| Power Dissipation in Still Air | PD | 200 | mW | still air | 2 | ||
| ESD Withstand Voltage, Human Body Model | VESD | 2000 | V | Human Body Model, EIA/JESD22-A114-A; printed as > 2000 V | 2 | ||
| Junction Temperature under Bias | TJ | 150 | °C | under bias | 2 | ||
| Thermal Resistance | JA | 333 | °C/W | Single value printed; symbol printed without θ | 2 |
CAD (KiCad official)
- Symbol:
NL27WZ17DFT2G - Footprint:
Package_TO_SOT_SMD:SOT-363_SC-70-6 - 3D model: SC-70-6(SOT-363) (KiCad packages3D, STEP)
- 3D model files:
nl27wz17dft2g-etched.step/nl27wz17dft2g-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);nl27wz17dft2g.step/nl27wz17dft2g.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: onsemi datasheet (5 pp, sha256
132afe809ada0605, retrieved 2026-10-18, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).