NJM14570RB1-TE1

{
  "slug": "njm14570rb1-te1",
  "version": "0.1.0",
  "type": "component",
  "description": "JRC , MSOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "ic",
    "njm14570rb1-te1",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "njm14570rb1-te1.kicad_sym",
    "njm14570rb1-te1.kicad_mod",
    "njm14570rb1-te1.glb",
    "njm14570rb1-te1.step",
    "njm14570rb1-te1.lbr",
    "docs/hero.png",
    "docs/njm14570rb1-te1-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "njm14570rb1-te1-hero.glb",
    "njm14570rb1-te1-hero.overlay.json",
    "njm14570rb1-te1-etched.glb"
  ],
  "component": {
    "mpn": "NJM14570RB1-TE1",
    "manufacturer": "JRC",
    "package": "MSOP-8",
    "pin_count": 8,
    "category": "IC",
    "subcategory": "IC",
    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8603161979398352896",
    "parts": {
      "symbol": "njm14570rb1-te1.kicad_sym",
      "footprint": "njm14570rb1-te1.kicad_mod",
      "model_3d": "njm14570rb1-te1-hero.glb",
      "model_3d_plain": "njm14570rb1-te1-etched.glb",
      "model_3d_step": "njm14570rb1-te1-etched.step",
      "model_3d_step_plain": "njm14570rb1-te1.step",
      "lbr": "njm14570rb1-te1.lbr"
    },
    "distributor_links": {
      "lcsc": "C5200653",
      "digikey": "2129-NJM14570RB1-TE1-ND",
      "mouser": "513-NJM14570"
    },
    "distributor_check": {
      "checked_at": "2026-10-20T23:50:58Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "2129-NJM14570RB1-TE1-ND",
        "status": "found",
        "lifecycle": "Active"
      },
      "mouser": {
        "pn": "513-NJM14570",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "DET OUT",
        "type": "output",
        "description": "FM detector output, which the terminal table gives as about 1.5 V DC with no signal at V+ = 3 V."
      },
      {
        "number": "2",
        "name": "QUAD COIL",
        "type": "passive",
        "description": "FM detector input connected to the phase-shift (quadrature) circuit, about 3.0 V DC with no signal at V+ = 3 V."
      },
      {
        "number": "3",
        "name": "V+",
        "type": "power_in",
        "description": "Supply voltage pin with a recommended range of 1.8 V to 9 V and an absolute maximum rating of 10 V."
      },
      {
        "number": "4",
        "name": "RSSI OUT",
        "type": "output",
        "description": "Received signal strength indicator output that gives a DC level proportional to the log of the IF input level on pin 5."
      },
      {
        "number": "5",
        "name": "IF IN",
        "type": "input",
        "description": "IF amplifier input, about 2.6 V DC with no signal at V+ = 3 V."
      },
      {
        "number": "6",
        "name": "GND",
        "type": "power_in",
        "description": "Ground terminal at 0.0 V."
      },
      {
        "number": "7",
        "name": "DECOUPLE1",
        "type": "passive",
        "description": "IF decoupling pin for an external capacitor that sets IF amplifier bandwidth, where a large capacitor gives wide band and a small capacitor gives narrow band."
      },
      {
        "number": "8",
        "name": "DECOUPLE2",
        "type": "passive",
        "description": "IF decoupling pin for an external capacitor that sets IF amplifier bandwidth, where a large capacitor gives wide band and a small capacitor gives narrow band."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The MPN NJM14570RB1-TE1 is not written out in the datasheet. The text names the device NJM14570RB1 w; The datasheet does not state a pin type for QUAD COIL. It is typed as passive because it is the conn; The terminal table gives no DC voltage for RSSI OUT (listed as '--'), so none is reported in the des"
        ],
        "pages_sent": 14,
        "cost_usd": 0.052,
        "at": "2026-10-20T23:49:08"
      },
      "datasheet": {
        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8603161979398352896",
        "pages": 14,
        "sha256": "d778212b2d6cb0c0",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 8,
        "described": 8,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "njm14570rb1-te1.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          4.9,
          3.0,
          0.95
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "847c4c5023fe1603fbd36900a5dcc4bd3901ba473f71d42c9a469f0236eaadf3",
        "checked": "2026-10-20",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "njm14570rb1-te1-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          4.9,
          3.0,
          0.95
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "b1f3f0ff3885311362f2ec9c6ea9683d841cee0e14c020f5656bbaa26302d10b",
        "checked": "2026-10-20",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}