main
Ray Brief states the pinout check that actually ran (was an unconditional "Datasheet-verified pinout") 7cf3438
{
  "schema_version": 1,
  "type": "component",
  "slug": "ne556drg",
  "title": "NE556DRG",
  "brief": "HANSCHIP semiconductor Timers / Clock Oscillators, SOP-14. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.",
  "version": "0.1.0",
  "license": "CC-BY-SA-4.0",
  "tags": [
    "component",
    "rtc",
    "ne556drg"
  ],
  "component": {
    "mpn": "NE556DRG",
    "manufacturer": "HANSCHIP semiconductor",
    "package": "SOP-14",
    "pin_count": 14,
    "category": "RTC",
    "subcategory": "Timers / Clock Oscillators",
    "datasheet": "https://wmsc.lcsc.com/wmsc/upload/file/pdf/v2/lcsc/2209290930_HANSCHIP-semiconductor-NE556DRG_C5145392.pdf",
    "parts": {
      "symbol": "ne556drg.kicad_sym",
      "footprint": "ne556drg.kicad_mod",
      "model_3d": "ne556drg.glb",
      "model_3d_step": "ne556drg.step",
      "lbr": "ne556drg.lbr"
    },
    "distributor_links": {},
    "pins": [
      {
        "number": "1",
        "name": "DIS1",
        "type": "output",
        "description": "Discharge pin for timer 1. Open-collector output that discharges the external timing capacitor when the internal flip-flop is set."
      },
      {
        "number": "2",
        "name": "THR1",
        "type": "input",
        "description": "Threshold input for timer 1. When voltage exceeds 2/3 VCC, the internal flip-flop resets and the output goes low."
      },
      {
        "number": "3",
        "name": "CV1",
        "type": "input",
        "description": "Control voltage input for timer 1. Allows external modulation of the internal 2/3 VCC threshold reference; typically bypassed to GND with a 10 nF capacitor."
      },
      {
        "number": "4",
        "name": "RESET1",
        "type": "input",
        "description": "Active-low reset for timer 1. Driving this pin below ~0.7 V forces the output low regardless of timing state; tie to VCC when not used."
      },
      {
        "number": "5",
        "name": "OUT1",
        "type": "output",
        "description": "Output of timer 1. Push-pull output capable of sourcing/sinking up to 200 mA, swinging between GND and near VCC."
      },
      {
        "number": "6",
        "name": "TRIG1",
        "type": "input",
        "description": "Trigger input for timer 1. A negative-going pulse below 1/3 VCC starts the timing cycle and drives the output high."
      },
      {
        "number": "7",
        "name": "GND",
        "type": "power_in",
        "description": "Ground reference for both timers. Connect to system 0 V."
      },
      {
        "number": "8",
        "name": "TRIG2",
        "type": "input",
        "description": "Trigger input for timer 2. A negative-going pulse below 1/3 VCC starts the timing cycle and drives the output high."
      },
      {
        "number": "9",
        "name": "OUT2",
        "type": "output",
        "description": "Output of timer 2. Push-pull output capable of sourcing/sinking up to 200 mA, swinging between GND and near VCC."
      },
      {
        "number": "10",
        "name": "RESET2",
        "type": "input",
        "description": "Active-low reset for timer 2. Driving this pin below ~0.7 V forces the output low regardless of timing state; tie to VCC when not used."
      },
      {
        "number": "11",
        "name": "CV2",
        "type": "input",
        "description": "Control voltage input for timer 2. Allows external modulation of the internal 2/3 VCC threshold reference; typically bypassed to GND with a 10 nF capacitor."
      },
      {
        "number": "12",
        "name": "THR2",
        "type": "input",
        "description": "Threshold input for timer 2. When voltage exceeds 2/3 VCC, the internal flip-flop resets and the output goes low."
      },
      {
        "number": "13",
        "name": "DIS2",
        "type": "output",
        "description": "Discharge pin for timer 2. Open-collector output that discharges the external timing capacitor when the internal flip-flop is set."
      },
      {
        "number": "14",
        "name": "VCC",
        "type": "power_in",
        "description": "Positive supply voltage for both timers. Operating range typically 4.5 V to 16 V. Bypass with a 100 nF ceramic capacitor close to the pin."
      }
    ],
    "provenance": {
      "extractor": "ds2sf",
      "datasheet": {
        "url": "https://wmsc.lcsc.com/wmsc/upload/file/pdf/v2/lcsc/2209290930_HANSCHIP-semiconductor-NE556DRG_C5145392.pdf",
        "pages": 5,
        "sha256": "970a3f304f364539",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 14,
        "described": 14,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    }
  },
  "metadata": {
    "specs": {
      "Manufacturer": "HANSCHIP semiconductor",
      "Package": "SOP-14",
      "Category": "RTC",
      "Pins": "14"
    }
  },
  "variants": [
    {
      "mpn": "NE556DRG",
      "kind": "packaging"
    },
    {
      "mpn": "NE556DRGD",
      "kind": "packaging"
    },
    {
      "mpn": "NE556DRGN",
      "kind": "packaging"
    },
    {
      "mpn": "NE556DRGP",
      "kind": "packaging"
    },
    {
      "mpn": "NE556DRGPW",
      "kind": "packaging"
    }
  ],
  "sections": [
    "hero",
    "viewers",
    "readme",
    "breadcrumbs",
    "info"
  ],
  "discovery_triggers": [
    "ne556drg"
  ],
  "discovery_pitch": "NE556DRG (HANSCHIP semiconductor) component page with datasheet-verified CAD.",
  "author": {
    "name": "Ray"
  },
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "ne556drg.kicad_sym",
    "ne556drg.kicad_mod",
    "ne556drg.glb",
    "ne556drg.step",
    "ne556drg.lbr",
    "docs/hero.png",
    "docs/ne556drg-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html"
  ],
  "visibility": {
    "public": true
  },
  "updated_at": "2026-09-25T03:11:03.115Z"
}